Grade 4 Mathematics Unit 7: Measurement & Data
This Grade 4 Mathematics unit, Measurement & Data, has 4 lessons that cover TEKS 4.8A, 4.8B, 4.8C, 4.9A, 4.9B. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
STAAR connection: Grade 4 Mathematics is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.
TEKS covered in this unit
- 4.8A identify relative sizes of measurement units within the customary and metric systems
- 4.8B convert measurements within the same measurement system, customary or metric, from a smaller unit into a larger unit or a larger unit into a smaller unit when given other equivalent measures represented in a table
- 4.8C solve problems that deal with measurements of length, intervals of time, liquid volumes, mass, and money
- 4.9A represent data on a frequency table, dot plot, or stem-and-leaf plot marked with whole numbers and fractions
- 4.9B solve one- and two-step problems using data in whole number, decimal, and fraction form in a frequency table, dot plot, or stem-and-leaf plot
Lesson 1: Units of measurement and conversions
TEKS 4.8A 4.8B
What you will learn
I can convert measurements within the metric system and within the customary system and solve problems with them.
I can explain how to convert with a conversion table by multiplying to a smaller unit.
Key vocabulary
- convert
- To change a measurement to a different unit that names the same amount.
Examples: 2 m = 200 cm; 3 ft = 36 in - conversion table
- A table listing how many smaller units make one larger unit.
Examples: 1 kg = 1,000 g; 1 lb = 16 oz - capacity
- How much a container holds; measured in liters, milliliters, cups, quarts and gallons.
Examples: A pitcher holds 2 L; 1 gal = 4 qt
Worked example
Convert 3 ft to inches and 2.5 m to centimeters, and 3 quarts to pints.
- 1 ft = 12 in, so 3 ft = 3 × 12 = 36 in.
Larger unit to smaller unit: multiply. - 1 m = 100 cm, so 2.5 m = 2.5 × 100 = 250 cm.
The same rule works in metric. - 1 qt = 2 pt, so 3 qt = 3 × 2 = 6 pt.
Customary capacity. - Check: smaller units give a larger number: 36 > 3, 250 > 2.5, 6 > 3 ✓.
More small units than large units.
Strategy: Table, multiply, check size
- Find how many small units make 1 large unit.
- Multiply the amount by that number.
- Check: the number should be larger.
Check your understanding
How many inches are in 3 feet?
- 24
- 3
- 15
- 36
Show the answer
Answer: D. 36
3 × 12 = 36.
How many centimeters are in 4 meters?
- 104
- 4,000
- 40
- 400
Show the answer
Answer: D. 400
4 × 100 = 400.
How many pints are in 3 quarts?
- 12
- 2
- 6
- 1
Show the answer
Answer: C. 6
3 × 2 = 6.
Lesson 2: Measurement problems: length, time, volume, mass and money
TEKS 4.8C
What you will learn
I can solve problems involving elapsed time in hours and minutes within a 12-hour period.
I can explain elapsed time using a number line and jumps.
Key vocabulary
- elapsed time
- The amount of time that passes from a start time to an end time.
Examples: 3:15 to 4:45 is 1 h 30 min; 9:00 to 11:20 is 2 h 20 min - A.M.
- Times from midnight until just before noon.
Examples: 7:30 A.M.; 11:59 A.M. - P.M.
- Times from noon until just before midnight.
Examples: 2:15 P.M.; 8:00 P.M.
Worked example
A movie starts at 3:15 P.M. and ends at 5:40 P.M. How long is it?
- Jump from 3:15 to 4:00: 45 minutes.
Get to the next whole hour first. - Jump from 4:00 to 5:00: 1 hour.
Whole hour jump. - Jump from 5:00 to 5:40: 40 minutes.
Finish with the minutes. - Add: 45 min + 1 h + 40 min = 1 h 85 min = 2 h 25 min.
Regroup 60 minutes into an hour.
Strategy: Jump to the hour, jump hours, jump minutes
- Jump to the next whole hour.
- Jump by whole hours.
- Jump the remaining minutes and add; regroup 60 min.
Check your understanding
How much time from 2:00 to 4:30?
- 30 min
- 3 h 30 min
- 2 h
- 2 h 30 min
Show the answer
Answer: D. 2 h 30 min
2 h + 30 min = 2 h 30 min.
A show starts at 6:15 and ends at 7:05. How long?
- 40 min
- 1 h
- 1 h 10 min
- 50 min
Show the answer
Answer: D. 50 min
45 + 5 = 50 minutes.
Practice starts at 3:45 P.M. and lasts 1 h 30 min. When does it end?
- 4:15 P.M.
- 5:15 P.M.
- 4:75 P.M.
- 5:30 P.M.
Show the answer
Answer: B. 5:15 P.M.
4:45 + 30 min = 5:15.
Lesson 3: Frequency tables, dot plots and stem-and-leaf plots
TEKS 4.9A
What you will learn
I can represent data on a frequency table and dot plot with whole numbers and fractions and solve problems with them.
I can explain a frequency table and a dot plot and use them to answer questions.
Key vocabulary
- dot plot
- A display that puts a dot above a number line for each piece of data.
Examples: Heights of plants; Pencil lengths - frequency table
- A table that shows how many times each value occurs.
Examples: Value 3: frequency 4; Tally marks - data
- Information collected, often as numbers.
Examples: Pencil lengths; Number of pets
Worked example
Pencil lengths in inches: 3, 3 1/2, 3 1/2, 4, 4, 4, 4 1/2. Make a frequency table and a dot plot and find how many pencils are longer than 3 1/2 inches.
- Frequency table: 3 → 1, 3 1/2 → 2, 4 → 3, 4 1/2 → 1.
Count each value. - Dot plot: put 1 dot over 3, 2 dots over 3 1/2, 3 dots over 4 and 1 dot over 4 1/2.
One dot per pencil. - Longer than 3 1/2 inches: 3 + 1 = 4 pencils.
Add the dots to the right of 3 1/2. - Check: 1 + 2 + 3 + 1 = 7 pencils in all, matching the 7 data values ✓.
The dots must equal the data count.
Strategy: Count, plot, answer
- Count how many times each value appears.
- Put one dot for each piece of data.
- Add dots to answer; check the total.
Check your understanding
A dot plot has 3 dots above 4. What does that mean?
- There are 4 values
- The value is 12
- The value 3 appears 4 times
- The value 4 appears 3 times
Show the answer
Answer: D. The value 4 appears 3 times
Each dot is one data value.
Data: 2, 2, 3, 5, 5, 5. What is the frequency of 5?
- 2
- 5
- 3
- 15
Show the answer
Answer: C. 3
The value 5 appears 3 times.
Which value occurs most often in 1, 2, 2, 3, 3, 3, 4?
- 2
- 3
- 1
- 4
Show the answer
Answer: B. 3
The value 3 appears 3 times.
Lesson 4: Solving problems with data
TEKS 4.9B
What you will learn
I can represent data on a stem-and-leaf plot and solve problems with it.
I can explain how a stem-and-leaf plot shows the stem (tens) and the leaf (ones).
Key vocabulary
- stem
- The digits to the left, usually the tens place of a data value.
Examples: In 34, the stem is 3; In 52, the stem is 5 - leaf
- The last digit of a data value, usually the ones place.
Examples: In 34, the leaf is 4; In 52, the leaf is 2 - key
- A note that explains how to read the plot, such as 3 | 4 means 34.
Examples: 3 | 4 = 34; 5 | 2 = 52
Worked example
Scores: 34, 41, 45, 45, 52, 58. Make a stem-and-leaf plot and find how many scores are 45 or more.
- Stems are the tens: 3, 4, 5.
Write them in a column in order. - Leaves in order: 3 | 4; 4 | 1 5 5; 5 | 2 8.
Write each leaf next to its stem, in order. - Key: 4 | 1 means 41.
Always include a key. - Scores 45 or more: 45, 45, 52, 58 = 4 scores. Check: 1 + 3 + 2 = 6 leaves, 6 scores in all ✓.
Count leaves.
Strategy: Stems, ordered leaves, key
- Split each value into stem and leaf.
- List leaves in order next to each stem.
- Write a key; count leaves to check.
Check your understanding
In a plot, 4 | 7 with the key 4 | 7 = 47. Which value is it?
- 11
- 74
- 4.7
- 47
Show the answer
Answer: D. 47
The stem is the tens and the leaf is the ones.
Which value has stem 5 and leaf 2?
- 7
- 25
- 52
- 5.2
Show the answer
Answer: C. 52
Stem 5 and leaf 2 is 52.
A row reads 3 | 0 5 5 8. How many values are in that row?
- 3
- 4
- 21
- 8
Show the answer
Answer: B. 4
There are four leaves.