Texas Test Academy

Take learning by the horns.

Grade 5 Mathematics Unit 5: Geometry, Measurement & the Coordinate Plane

This Grade 5 Mathematics unit, Geometry, Measurement & the Coordinate Plane, has 3 lessons that cover TEKS 5.5, 5.7, 5.8A, 5.8B, 5.8C. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

STAAR connection: Grade 5 Mathematics is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.

TEKS covered in this unit

Lesson 1: Classifying two-dimensional figures

TEKS 5.5

What you will learn

I can classify two-dimensional figures in a hierarchy of sets and subsets using their attributes.

I can explain how attributes like parallel sides, right angles and equal sides place a shape in a hierarchy.

Key vocabulary

attribute
A feature of a shape, such as the number of sides, parallel sides, equal sides or right angles.
Examples: 4 equal sides; 2 pairs of parallel sides
parallel sides
Sides that are always the same distance apart and never meet.
Examples: Opposite sides of a rectangle; The top and bottom of a trapezoid
hierarchy
A way to organize shapes in sets and subsets so that each subset has all the properties of the set above it.
Examples: Every square is a rectangle; Every rectangle is a parallelogram

Worked example

Is every square a rectangle? Is every rectangle a square? Place a square in the hierarchy of quadrilaterals.

  1. A quadrilateral has 4 sides. A trapezoid has at least one pair of parallel sides. A parallelogram has two pairs.
    Each set adds an attribute.
  2. A rectangle is a parallelogram with 4 right angles. A rhombus is a parallelogram with 4 equal sides.
    Add right angles or equal sides.
  3. A square has 4 right angles and 4 equal sides, so it is both a rectangle and a rhombus.
    It has every attribute of both.
  4. Every square is a rectangle, but a rectangle with unequal sides is not a square. A square belongs to: quadrilateral → trapezoid → parallelogram → rectangle/rhombus → square.
    A subset has all attributes of the set, plus more.

Strategy: Add one attribute at a time

Check your understanding

  1. Which statement is true?

    1. No square is a rhombus
    2. Every trapezoid is a parallelogram
    3. Every rectangle is a square
    4. Every square is a rectangle
    Show the answer

    Answer: D. Every square is a rectangle

    A square has all the attributes of a rectangle.

  2. A quadrilateral has exactly one pair of parallel sides. It is a…

    1. square
    2. rectangle
    3. parallelogram
    4. trapezoid
    Show the answer

    Answer: D. trapezoid

    Exactly one pair of parallel sides makes a trapezoid.

  3. Which shape has 4 equal sides but not necessarily 4 right angles?

    1. Trapezoid
    2. Rectangle
    3. Rhombus
    4. Square only
    Show the answer

    Answer: C. Rhombus

    A rhombus has four equal sides; a square is a rhombus with right angles.

Practice this lesson with interactive questions

Lesson 2: Converting units

TEKS 5.7

What you will learn

I can solve problems by converting units within the customary or metric system.

I can explain how the conversion factor tells me to multiply or divide when changing between a larger and a smaller unit.

Key vocabulary

conversion
Changing a measurement from one unit to another without changing its size.
Examples: 3 feet = 36 inches; 2.5 km = 2,500 m
customary units
The U.S. system: inches, feet, yards, miles, ounces, pounds, cups, quarts, gallons.
Examples: 12 inches = 1 foot; 4 quarts = 1 gallon
metric units
The international system based on 10: millimeters, centimeters, meters, kilometers, grams, kilograms, liters.
Examples: 100 cm = 1 m; 1,000 mL = 1 L

Worked example

A ribbon is 3.5 meters long. How many centimeters is that? Then, how many quarts are in 7 gallons?

  1. 1 meter = 100 centimeters. Going to a smaller unit means more pieces, so multiply.
    Smaller unit, bigger number.
  2. 3.5 × 100 = 350 centimeters.
    Multiplying by 100 moves the decimal point 2 places right.
  3. 1 gallon = 4 quarts. Gallons to quarts is larger to smaller, so multiply: 7 × 4 = 28 quarts.
    Same rule.
  4. To go from a smaller unit to a larger one, divide: 28 quarts ÷ 4 = 7 gallons. Check by converting back.
    Converting back checks the answer.

Strategy: Big to small: multiply; small to big: divide

Check your understanding

  1. How many inches are in 4 feet?

    1. 12
    2. 4.8
    3. 16
    4. 48
    Show the answer

    Answer: D. 48

    4 × 12 = 48 inches.

  2. Convert 2,500 meters to kilometers.

    1. 2,500,000 km
    2. 250 km
    3. 25 km
    4. 2.5 km
    Show the answer

    Answer: D. 2.5 km

    2,500 ÷ 1,000 = 2.5.

  3. A bag holds 48 ounces. How many pounds is that?

    1. 768 pounds
    2. 3 pounds
    3. 30 pounds
    4. 32 pounds
    Show the answer

    Answer: B. 3 pounds

    48 ÷ 16 = 3 pounds.

Practice this lesson with interactive questions

Lesson 3: The first-quadrant coordinate plane

TEKS 5.8A 5.8B 5.8C

What you will learn

I can describe the first-quadrant coordinate plane, how to graph ordered pairs, and graph pairs from patterns and tables.

I can explain how the x-coordinate and y-coordinate tell how far to move from the origin.

Key vocabulary

coordinate plane
A flat surface with a horizontal x-axis and a vertical y-axis that meet at right angles at the origin (0, 0).
Examples: A grid with axes; A map with a grid
ordered pair
Two numbers (x, y) that name a point. The x-coordinate comes first and tells the move parallel to the x-axis; the y-coordinate tells the move parallel to the y-axis.
Examples: (6, 4) is 6 right, 4 up; (0, 5) is on the y-axis
origin
The point (0, 0) where the x-axis and y-axis meet.
Examples: The corner of the first quadrant; (0, 0)

Worked example

Graph the pairs from the table x: 1, 2, 3 and y: 2, 4, 6, and describe how to graph (3, 5).

  1. Start at the origin (0, 0).
    Every point is located from the origin.
  2. For (3, 5): move 3 units right along the x-axis, then 5 units up, parallel to the y-axis. Mark the point.
    First number: right. Second number: up.
  3. For the table, plot (1, 2), (2, 4), (3, 6).
    Each row of the table is an ordered pair.
  4. The points rise in a straight line: y = 2x. (3, 5) and (5, 3) are different points because order matters.
    The x-coordinate is always first.

Strategy: Over, then up

Check your understanding

  1. To graph (4, 7) from the origin, you move…

    1. 11 right
    2. 4 up and 7 right
    3. 7 right and 4 up
    4. 4 right and 7 up
    Show the answer

    Answer: D. 4 right and 7 up

    The x-coordinate (4) is the move right; the y-coordinate (7) is the move up.

  2. What are the coordinates of the origin?

    1. (0, 1)
    2. (1, 1)
    3. (0, 0)
    4. (1, 0)
    Show the answer

    Answer: C. (0, 0)

    The axes meet at (0, 0).

  3. Which point is on the y-axis?

    1. (6, 0)
    2. (0, 6)
    3. (3, 3)
    4. (6, 6)
    Show the answer

    Answer: B. (0, 6)

    The y-axis points have x = 0.

Practice this lesson with interactive questions