Grade 6 Mathematics Unit 8: Coordinate Plane & Data
This Grade 6 Mathematics unit, Coordinate Plane & Data, has 6 lessons that cover TEKS 6.11, 6.12A, 6.12B, 6.13A, 6.12C, 6.12D, 6.13B. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
STAAR connection: Grade 6 Mathematics is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.
TEKS covered in this unit
- 6.11 graph points in all four quadrants using ordered pairs of rational numbers
- 6.12A represent numeric data graphically, including dot plots, stem-and-leaf plots, histograms, and box plots
- 6.12B use the graphical representation of numeric data to describe the center, spread, and shape of the data distribution
- 6.13A interpret numeric data summarized in dot plots, stem-and-leaf plots, histograms, and box plots
- 6.12C summarize numeric data with numerical summaries, including the mean and median (measures of center) and the range and interquartile range (IQR) (measures of spread), and use these summaries to describe the center, spread, and shape of the data distribution
- 6.12D summarize categorical data with numerical and graphical summaries, including the mode, the percent of values in each category (relative frequency table), and the percent bar graph, and use these summaries to describe the data distribution
- 6.13B distinguish between situations that yield data with and without variability
Lesson 1: Graphing in four quadrants
TEKS 6.11
What you will learn
I can graph points in all four quadrants using ordered pairs of rational numbers.
I can explain ordered pair, quadrant and how the signs of x and y tell the quadrant.
Key vocabulary
- ordered pair
- Two numbers (x, y) that name a point on the coordinate plane: x tells how far left or right, y tells how far up or down.
Examples: (3, −2); (−1.5, 4) - quadrant
- One of the four regions of the coordinate plane formed by the axes. I (+, +), II (−, +), III (−, −), IV (+, −).
Examples: (2, 3) in I; (−2, −3) in III - axis
- One of the two number lines that cross at the origin (0, 0): the horizontal x-axis and the vertical y-axis.
Examples: (4, 0) on the x-axis; (0, −3) on the y-axis
Worked example
Plot A(3, −2), B(−1.5, 4) and C(−2, −3). Name each quadrant.
- A(3, −2): start at the origin, go right 3, then down 2. x is positive and y is negative: Quadrant IV.
Right/left first, then up/down. - B(−1.5, 4): go left 1.5, then up 4. x negative, y positive: Quadrant II.
Rational numbers (decimals) are fine. - C(−2, −3): go left 2 and down 3. Both negative: Quadrant III.
Both negative → III. - A point like (5, 0) is on the x-axis and is in no quadrant.
Axis points are not in a quadrant.
Strategy: Across, then up/down
- x first: right (+) or left (−).
- Then y: up (+) or down (−).
- Signs tell the quadrant: I (+,+), II (−,+), III (−,−), IV (+,−).
Check your understanding
In which quadrant is (−4, 7)?
- Quadrant IV
- Quadrant III
- Quadrant I
- Quadrant II
Show the answer
Answer: D. Quadrant II
Left and up is Quadrant II.
Which point is in Quadrant IV?
- (5, 1)
- (−5, −1)
- (−5, 1)
- (5, −1)
Show the answer
Answer: D. (5, −1)
(5, −1) has positive x and negative y.
Where is (0, −6)?
- On the x-axis
- In Quadrant III
- On the y-axis
- In Quadrant IV
Show the answer
Answer: C. On the y-axis
x = 0 puts it on the y-axis.
Lesson 2: Dot plots, stem-and-leaf plots, histograms and box plots
TEKS 6.12A
What you will learn
I can represent numeric data with dot plots, stem-and-leaf plots, histograms and box plots.
I can explain how each data display shows the same data differently.
Key vocabulary
- dot plot
- A display that puts a dot above a number line for each data value, so repeats stack up.
Examples: Quiz scores with stacked dots; Pets per family - histogram
- A display with bars that show how many data values fall in equal-width intervals (bins). The bars touch.
Examples: Heights grouped 50–54, 55–59, …; Scores in intervals - box plot
- A display of the five-number summary: minimum, Q1, median, Q3, maximum. The box holds the middle half of the data.
Examples: Whiskers from min to Q1 and Q3 to max; A line at the median
Worked example
Make a dot plot and a box plot for 6, 7, 7, 8, 8, 8, 9, 9, 10, 10 (quiz scores).
- Dot plot: draw a number line from 6 to 10 and stack dots: one 6, two 7s, three 8s, two 9s, two 10s.
Count repeats. - Sort the data: 6, 7, 7, 8, 8, 8, 9, 9, 10, 10. Median = (8 + 8) ÷ 2 = 8.
Median of 10 values is the mean of the 5th and 6th. - Lower half 6, 7, 7, 8, 8 → Q1 = 7. Upper half 8, 9, 9, 10, 10 → Q3 = 9.
Quartiles are medians of the halves. - Box plot: minimum 6, Q1 7, median 8, Q3 9, maximum 10. A histogram with bins 6–7, 8–9, 10 would show counts 3, 5, 2.
Different displays, same data.
Strategy: Sort, summarize, draw
- Sort the data and count repeats.
- Find the five numbers (min, Q1, median, Q3, max).
- Choose a display: dots show every value, bins group them, boxes summarize.
Check your understanding
Which display shows each individual data value as a dot?
- Circle graph
- Box plot
- Histogram
- Dot plot
Show the answer
Answer: D. Dot plot
A dot plot has one dot per value.
A box plot is built from which numbers?
- Only the median
- Sum and count
- Mean, mode, range
- Minimum, Q1, median, Q3, maximum
Show the answer
Answer: D. Minimum, Q1, median, Q3, maximum
These are the five values.
In a histogram, what does the height of a bar show?
- The mean of the interval
- How many values are in that interval
- The percent of the box
- The highest value
Show the answer
Answer: B. How many values are in that interval
The bar height is the frequency.
Lesson 3: Center, spread and shape
TEKS 6.12B 6.13A
What you will learn
I can use graphs of numeric data to describe the center, spread and shape of a distribution, and interpret data in displays.
I can explain center, spread and shape (symmetric, skewed).
Key vocabulary
- center
- A typical value of a data set, described by the mean or the median.
Examples: Median 8 on a dot plot; Mean 7.8 - spread
- How far apart the data values are, described by the range or IQR.
Examples: Range 4; IQR 2 - shape
- The overall pattern of a distribution: symmetric (balanced), skewed right (tail toward larger values) or skewed left (tail toward smaller values).
Examples: A tail to the right: skewed right; Balanced hump: symmetric
Worked example
Describe the data in a dot plot of pets per family: 0, 0, 0, 0, 1, 1, 1, 1, 2, 2, 3, 6.
- Center: sorted data has median (1 + 1) ÷ 2 = 1. The mean is 17 ÷ 12 ≈ 1.4.
Median is steady; the mean is pulled by the 6. - Spread: range = 6 − 0 = 6. IQR: Q1 = 0, Q3 = 2, so IQR = 2.
Most families are within 2 of each other. - Shape: most values are small, with a long tail toward 6, so the shape is skewed right.
The tail points toward larger values. - Summary: most families have 0–2 pets (center ≈ 1), spread is small except for one family with 6, and the distribution is skewed right.
Describe center, spread and shape together.
Strategy: Center, spread, shape
- Center: median (or mean).
- Spread: range and IQR.
- Shape: where is the tail? symmetric, skewed left or skewed right.
Check your understanding
A dot plot has a long tail toward high values. The shape is…
- uniform
- symmetric
- skewed left
- skewed right
Show the answer
Answer: D. skewed right
The tail points right.
Which measures describe spread?
- Mode and mean
- Mean and median
- Range and IQR
- Median only
Show the answer
Answer: C. Range and IQR
Range and IQR measure spread.
In a box plot the line inside the box marks the…
- mean
- median
- mode
- range
Show the answer
Answer: B. median
The median is the line in the box.
Lesson 4: Mean, median, range and IQR
TEKS 6.12C
What you will learn
I can summarize numeric data with the mean, median, range and IQR.
I can explain mean, median, range and interquartile range.
Key vocabulary
- mean
- The sum of the data values divided by the number of values. It is the balance point of the data.
Examples: 2, 4, 9 → 15 ÷ 3 = 5; Average score - median
- The middle value of the ordered data, or the mean of the two middle values when the count is even.
Examples: 3, 5, 9 → 5; 2, 4, 6, 8 → 5 - interquartile range (IQR)
- The difference between the third quartile Q3 and the first quartile Q1; it is the spread of the middle half of the data.
Examples: Q3 = 9, Q1 = 5 → IQR 4; Box width
Worked example
Find the mean, median, range and IQR of 4, 6, 7, 9, 10, 12, 20.
- Mean: 4 + 6 + 7 + 9 + 10 + 12 + 20 = 68; 68 ÷ 7 ≈ 9.7.
Add and divide by 7. - Median: the data are already sorted; the 4th of 7 values is 9.
The middle value. - Range: 20 − 4 = 16. Q1 = median of 4, 6, 7 = 6; Q3 = median of 10, 12, 20 = 12. IQR = 12 − 6 = 6.
Medians of the lower and upper halves. - The 20 pulls the mean (9.7) above the median (9) and inflates the range, but the IQR (6) is not affected much.
Compare the measures.
Strategy: Sort, center, spread
- Sort the data first.
- Mean = sum ÷ n; median = middle.
- Range = max − min; IQR = Q3 − Q1 (medians of the halves).
Check your understanding
Find the mean of 3, 5, 6, 10.
- 24
- 10
- 5.5
- 6
Show the answer
Answer: D. 6
24 ÷ 4 = 6.
Find the median of 2, 8, 3, 9, 5.
- 8
- 3
- 5
- 5.4
Show the answer
Answer: C. 5
The middle of the sorted list is 5.
Find the range of 7, 12, 3, 15, 9.
- 15
- 12
- 9.2
- 3
Show the answer
Answer: B. 12
15 − 3 = 12.
Lesson 5: Categorical data
TEKS 6.12D
What you will learn
I can summarize categorical data with the mode, a relative frequency table and a percent bar graph.
I can explain categorical data, mode and relative frequency.
Key vocabulary
- categorical data
- Data that sort things into groups or categories, such as favorite sport or eye color, rather than measuring a number.
Examples: Favorite sport; Pet type - relative frequency
- The percent (or fraction) of all values that fall in a category: category count ÷ total.
Examples: 12 of 40 = 30%; 8 of 40 = 20% - mode
- The category (or value) that occurs most often.
Examples: Soccer, if most chose soccer; The tallest bar
Worked example
Of 40 students, 12 chose soccer, 8 swim, 5 chess and 15 art. Make a relative frequency table and find the mode.
- Total = 12 + 8 + 5 + 15 = 40.
The total is the denominator. - Relative frequencies: soccer 12/40 = 30%, swim 8/40 = 20%, chess 5/40 = 12.5%, art 15/40 = 37.5%.
Count ÷ total, as a percent. - Check: 30 + 20 + 12.5 + 37.5 = 100%.
Percents must add to 100%. - Percent bar graph: one bar split into segments of 30%, 20%, 12.5% and 37.5%. The mode is art, the largest category.
The longest segment is the mode.
Strategy: Count, divide, check 100%
- Total all the counts.
- Relative frequency = count ÷ total (as a percent).
- The percents should add to 100%; the largest category is the mode.
Check your understanding
Which is categorical data?
- Number of siblings (count)
- Temperature in degrees
- Height of students
- Favorite pizza topping
Show the answer
Answer: D. Favorite pizza topping
Toppings are categories.
10 of 50 students prefer cats. What is the relative frequency?
- 10%
- 5%
- 20%
- 40%
Show the answer
Answer: C. 20%
10/50 = 0.20.
Counts: red 6, blue 9, green 5. What is the mode?
- Blue
- 9
- Green
- Red
Show the answer
Answer: A. Blue
Blue occurs most.
Lesson 6: Data with and without variability
TEKS 6.13B
What you will learn
I can tell situations that produce data with variability from situations that produce data without variability.
I can explain variability in data.
Key vocabulary
- variability
- How much data values differ from one another. Data have variability when repeating the situation can give different values.
Examples: Heights of students; Heads in 10 coin flips - statistical question
- A question that expects a variety of answers, such as “How many pets do students in my school have?”
Examples: How tall are sixth graders?; How long do students sleep? - data value
- One piece of information collected, such as a measurement or a count.
Examples: A height of 58 in; 3 pets
Worked example
Which has variability: the number of sides on triangles, or the heights of students in a class?
- Every triangle has exactly 3 sides. The data would be 3, 3, 3, 3, … — all the same.
No differences. - Students have different heights such as 54 in, 58 in, 61 in. The data differ.
Differences exist. - Triangle sides: no variability. Heights: variability.
Classify each. - A statistical question about heights (“How tall are the students in my class?”) expects different answers.
Variability makes a question statistical.
Strategy: Same every time?
- Collect (or imagine) several values.
- Are they all the same? No variability.
- Do they differ? There is variability, and the question is statistical.
Check your understanding
Which situation has NO variability?
- Heights of players
- Time to run a mile
- Number of pets per family
- The number of months in a year
Show the answer
Answer: D. The number of months in a year
A year always has 12 months.
Which is a statistical question?
- How many days are in a week?
- How many hours do students in my class sleep?
- How many sides does a square have?
- What is 7 × 8?
Show the answer
Answer: B. How many hours do students in my class sleep?
Different students sleep different hours.
Ten people measure the length of the same desk and get 120 cm, 120.2 cm, 119.8 cm, … The differences are due to…
- measurement variability
- mistakes in counting only
- different desks
- no variability
Show the answer
Answer: A. measurement variability
Measurements vary slightly.