Texas Test Academy

Take learning by the horns.

Grade 6 Science Unit 4: Earth and Space

This Grade 6 Science unit, Earth and Space, has 7 lessons that cover TEKS 6.9A, 6.9B, 6.10A, 6.10B, 6.10C, 6.11A, 6.11B. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Why we have seasons

TEKS 6.9A

What you will learn

I can model and explain the causes of Earth’s seasons using Earth’s tilt and revolution.

I can use tilt and revolution to explain seasons.

Key vocabulary

revolution
Earth’s trip once around the Sun, taking about 365.25 days.
Examples: Earth around the Sun; A planet’s orbit
axis
The imaginary line through Earth’s north and south poles, tilted 23.5°.
Examples: Earth’s axis points toward Polaris; A spinning top’s center
solstice
The day when a hemisphere is tilted most toward or away from the Sun.
Examples: June 21 in the north; December 21 in the north

Worked example

Explain why June is summer in Texas.

  1. Earth’s axis tilts 23.5° and keeps pointing the same direction.
    The tilt stays constant as Earth circles the Sun.
  2. In June the Northern Hemisphere leans toward the Sun.
    Sunlight arrives more directly, concentrating more energy per square meter.
  3. Days are also longer.
    More hours of sunlight add up to more heating, so it is summer.

Strategy: Tilt, angle, daylight

Check your understanding

  1. Seasons are caused by…

    1. Wind
    2. The Moon
    3. Distance to the Sun
    4. Earth’s tilt
    Show the answer

    Answer: D. Earth’s tilt

    Tilt.

  2. Earth revolves in about…

    1. 12 hours
    2. 29 days
    3. 24 hours
    4. 365 days
    Show the answer

    Answer: D. 365 days

    365 days.

  3. In June the north is tilted…

    1. Sideways
    2. Away
    3. Toward the Sun
    4. Upside down
    Show the answer

    Answer: C. Toward the Sun

    Toward.

Practice this lesson with interactive questions

Lesson 2: Tides

TEKS 6.9B

What you will learn

I can describe how the Sun and Moon interact with Earth to cause tides.

I can explain spring tides and neap tides using the Moon and Sun.

Key vocabulary

tide
The regular rise and fall of ocean water caused mainly by the Moon’s gravity.
Examples: High tide; Low tide
spring tide
A tide with the greatest range, when the Sun, Moon and Earth line up.
Examples: Full Moon tide; New Moon tide
neap tide
A tide with the smallest range, when the Sun and Moon pull at right angles.
Examples: First quarter tide; Last quarter tide

Worked example

Explain why most coasts have two high tides a day.

  1. The Moon’s gravity pulls the ocean toward it, making a bulge.
    Gravity is stronger on the near side of Earth than the far side.
  2. A second bulge forms on the opposite side.
    The far water is pulled less than Earth itself, so it is left behind in a bulge.
  3. As Earth rotates, a place passes through both bulges each day.
    That gives about two highs and two lows in about 24 hours 50 minutes.

Strategy: Line up or right angle?

Check your understanding

  1. Tides are caused mostly by…

    1. Rain
    2. Earth’s tilt
    3. Wind
    4. The Moon’s gravity
    Show the answer

    Answer: D. The Moon’s gravity

    Moon’s gravity.

  2. Spring tides happen at…

    1. Never
    2. Only summer
    3. Quarter Moon
    4. New and full Moon
    Show the answer

    Answer: D. New and full Moon

    New and full.

  3. Neap tides have…

    1. Largest range
    2. The smallest range
    3. Storms
    4. No change
    Show the answer

    Answer: B. The smallest range

    Smallest.

Practice this lesson with interactive questions

Lesson 3: Earth’s four spheres

TEKS 6.10A

What you will learn

I can describe how the geosphere, hydrosphere, atmosphere and biosphere interact.

I can explain how Earth’s four spheres interact in an example.

Key vocabulary

geosphere
Earth’s solid rock and soil, including the interior.
Examples: Mountains; Soil
hydrosphere
All of Earth’s water in oceans, lakes, rivers, ice and groundwater.
Examples: Ocean; Glaciers
atmosphere
The layer of gases surrounding Earth.
Examples: Nitrogen and oxygen; Clouds

Worked example

A volcano erupts. Which spheres are involved and how do they affect each other?

  1. Geosphere: molten rock and ash leave the volcano.
    The eruption starts inside the geosphere.
  2. Atmosphere: ash and gas enter the air and block some sunlight.
    That can cool the climate for months, and the ash and gas can cool Earth’s climate for months or years.
  3. Hydrosphere and biosphere: ash falls into water and onto plants, harming living things.
    The effects pass from sphere to sphere, so Earth works as a connected system.

Strategy: Name the spheres

Check your understanding

  1. The hydrosphere is…

    1. Life
    2. Air
    3. Rock
    4. All of Earth’s water
    Show the answer

    Answer: D. All of Earth’s water

    Water.

  2. The atmosphere is…

    1. Rock
    2. Water
    3. Gases around Earth
    4. Life
    Show the answer

    Answer: C. Gases around Earth

    Gases.

  3. The biosphere is…

    1. Rock
    2. Living things
    3. Air
    4. Water
    Show the answer

    Answer: B. Living things

    Life.

Practice this lesson with interactive questions

Lesson 4: Earth’s layers and plates

TEKS 6.10B

What you will learn

I can describe Earth’s layers and relate them to plate movement.

I can describe the crust, mantle, outer core and inner core and how plates move.

Key vocabulary

crust
Earth’s thin, rocky outer layer.
Examples: Continents; Ocean floor
mantle
The thick layer of hot, slowly flowing rock beneath the crust.
Examples: Convection currents; Magma source
tectonic plate
A large slab of lithosphere that moves slowly over the mantle.
Examples: The Pacific Plate; The North American Plate

Worked example

Order Earth’s layers from the surface in and describe each.

  1. Crust: thin, solid rock.
    It is only about 5–70 km thick, tiny compared with Earth’s 6,371 km radius.
  2. Mantle: hot, slowly flowing rock; outer core: liquid iron and nickel.
    Higher temperature and pressure with depth change how the materials behave.
  3. Inner core: solid iron and nickel.
    It is the hottest layer, but enormous pressure keeps it solid.

Strategy: Layer, state, motion

Check your understanding

  1. The thinnest layer is the…

    1. Inner core
    2. Outer core
    3. Mantle
    4. Crust
    Show the answer

    Answer: D. Crust

    Crust.

  2. The thickest layer is the…

    1. Inner core
    2. Crust
    3. Mantle
    4. Outer core
    Show the answer

    Answer: C. Mantle

    Mantle.

  3. The outer core is…

    1. Solid
    2. Liquid
    3. Plasma
    4. Gas
    Show the answer

    Answer: B. Liquid

    Liquid.

Practice this lesson with interactive questions

Lesson 5: The rock cycle

TEKS 6.10C

What you will learn

I can model the rock cycle and describe how rocks change among igneous, sedimentary and metamorphic.

I can trace a rock through the rock cycle and name the process at each step.

Key vocabulary

igneous rock
Rock formed when magma or lava cools and hardens.
Examples: Granite; Basalt
sedimentary rock
Rock formed when sediments are compacted and cemented in layers.
Examples: Sandstone; Limestone
metamorphic rock
Rock changed by heat and pressure without melting.
Examples: Marble; Slate

Worked example

Follow granite as it becomes sandstone, then marble.

  1. Weathering breaks granite into sand and erosion carries it away.
    Water and wind loosen and move the grains.
  2. Deposition, compaction and cementation form sandstone.
    Layers pile up, squeezing grains and gluing them with minerals.
  3. Heat and pressure later change limestone into marble.
    Buried rock recrystallizes without melting, producing a new texture.

Strategy: Process, product

Check your understanding

  1. Igneous rock forms from…

    1. Water
    2. Heat only
    3. Compacted sand
    4. Cooling magma
    Show the answer

    Answer: D. Cooling magma

    Cooling magma.

  2. Sedimentary rock has…

    1. Only crystals
    2. No layers
    3. Layers
    4. Gas
    Show the answer

    Answer: C. Layers

    Layers.

  3. Metamorphic rock forms by…

    1. Heat and pressure
    2. Erosion
    3. Cementing
    4. Cooling lava
    Show the answer

    Answer: A. Heat and pressure

    Heat and pressure.

Practice this lesson with interactive questions

Lesson 6: Managing resources

TEKS 6.11A

What you will learn

I can explain how resources are managed, including energy poverty and access to resources.

I can compare ways to manage resources and explain energy poverty.

Key vocabulary

energy poverty
Not having access to enough reliable, affordable energy for basic needs like cooking, heating and light.
Examples: Homes cooking over open fires; No electricity for clinics
resource management
Planning how to use resources so they last and are shared fairly.
Examples: Water restrictions; Fishing limits
access
The ability to obtain and use a resource.
Examples: A school with electricity; A well in a village

Worked example

About 700 million people worldwide lack electricity. Explain how that affects school and health.

  1. Without lights, students cannot study after dark.
    Daylight limits homework and reading, which cuts the hours available to read, do homework and learn.
  2. Clinics cannot refrigerate vaccines.
    Many vaccines spoil if they are not kept cold.
  3. Cooking over smoky fires harms lungs.
    Indoor smoke is a major cause of illness, so energy access is a health issue.

Strategy: Need, supply, fair access

Check your understanding

  1. Energy poverty means…

    1. Wind
    2. Free energy
    3. Too much energy
    4. Lack of reliable energy
    Show the answer

    Answer: D. Lack of reliable energy

    Lack.

  2. Resource management is…

    1. Wasting them
    2. Planning to use resources fairly
    3. Hiding them
    4. Ignoring them
    Show the answer

    Answer: B. Planning to use resources fairly

    Planning.

  3. Fixing leaks…

    1. Saves water for all users
    2. Does nothing
    3. Raises leaks
    4. Wastes water
    Show the answer

    Answer: A. Saves water for all users

    Saves.

Practice this lesson with interactive questions

Lesson 7: Conservation and efficiency

TEKS 6.11B

What you will learn

I can explain conservation, efficiency and sustainable use of resources.

I can calculate efficiency and describe sustainable choices.

Key vocabulary

conservation
Protecting and using resources wisely so they are not wasted.
Examples: Turning off lights; Insulating a house
efficiency
The percent of input energy that becomes useful output.
Examples: LED bulb 80%; Incandescent bulb 10%
sustainable
Using resources so that future generations can also meet their needs.
Examples: Replanting trees; Solar power

Worked example

An incandescent bulb turns 100 J of electricity into 5 J of light. An LED turns 100 J into 40 J of light. Compare efficiency.

  1. Incandescent: 5 ÷ 100 = 5%.
    Dividing useful output by input measures how efficient it is.
  2. LED: 40 ÷ 100 = 40%.
    The LED uses its energy eight times better.
  3. LEDs waste less as heat and cost less to run.
    Higher efficiency means lower electric bills and less fuel burned at power plants.

Strategy: Use, waste, sustain

Check your understanding

  1. Efficiency =

    1. Waste ÷ input
    2. Input ÷ output
    3. Useful output ÷ input
    4. Heat ÷ light
    Show the answer

    Answer: C. Useful output ÷ input

    Useful ÷ input.

  2. 5 ÷ 100 =

    1. 50%
    2. 5%
    3. 500%
    4. 0.5%
    Show the answer

    Answer: B. 5%

    5%.

  3. Sustainable use…

    1. Leaves enough for the future
    2. Wastes
    3. Ignores supply
    4. Uses everything now
    Show the answer

    Answer: A. Leaves enough for the future

    For the future.

Practice this lesson with interactive questions