Texas Test Academy

Take learning by the horns.

Grade 7 Science Unit 3: Motion and Heat

This Grade 7 Science unit, Motion and Heat, has 7 lessons that cover TEKS 7.7A, 7.7B, 7.7C, 7.7D, 7.8A, 7.8B, 7.8C. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Average speed

TEKS 7.7A

What you will learn

I can calculate average speed from distance and time.

I can use speed = distance ÷ time and convert units.

Key vocabulary

speed
The distance an object travels per unit of time.
Examples: A runner at 5 m/s; A car at 25 m/s
average speed
Total distance divided by total time, even if the speed changes.
Examples: 300 m in 60 s is 5 m/s; A road trip average
rate
A quantity that compares two amounts with different units.
Examples: km per hour; Words per minute

Worked example

A cyclist rides 1,200 m in 240 s. Find the average speed.

  1. Speed = distance ÷ time.
    Speed is defined as how far something goes in each unit of time.
  2. 1,200 m ÷ 240 s = 5 m/s.
    Dividing meters by seconds gives meters per second.
  3. She covers 5 m every second on average.
    Average speed tells the overall pace, even if she sped up and slowed down.

Strategy: Distance, time, divide

Check your understanding

  1. Speed =

    1. Force
    2. Mass × time
    3. Time ÷ distance
    4. Distance ÷ time
    Show the answer

    Answer: D. Distance ÷ time

    Distance ÷ time.

  2. 1,200 ÷ 240 =

    1. 500
    2. 0.5
    3. 50
    4. 5
    Show the answer

    Answer: D. 5

    5.

  3. Average speed uses…

    1. Mass
    2. The two speeds only
    3. Total distance and total time
    4. Direction
    Show the answer

    Answer: C. Total distance and total time

    Totals.

Practice this lesson with interactive questions

Lesson 2: Speed and velocity

TEKS 7.7B

What you will learn

I can distinguish between speed and velocity.

I can tell speed (size only) from velocity (size and direction).

Key vocabulary

velocity
Speed in a given direction.
Examples: 20 m/s north; 5 m/s east
scalar
A quantity with size only, such as speed, mass and time.
Examples: Speed; Distance
vector
A quantity with both size and direction, such as velocity and force.
Examples: Velocity; Force

Worked example

Two cars both go 20 m/s, one north and one south. Do they have the same speed? The same velocity?

  1. Both have a speed of 20 m/s.
    Speed only gives the size, because speed is a size without any direction attached.
  2. Their velocities differ: 20 m/s north and 20 m/s south.
    Velocity includes direction, so opposite directions make different velocities.
  3. Same speed, different velocity.
    This difference matters when we predict where objects will end up.

Strategy: Speed, direction, velocity

Check your understanding

  1. Velocity includes…

    1. Time only
    2. Color
    3. Mass
    4. Direction
    Show the answer

    Answer: D. Direction

    Direction.

  2. Speed is a…

    1. Mass
    2. Force
    3. Vector
    4. Scalar
    Show the answer

    Answer: D. Scalar

    Scalar.

  3. A full lap gives average velocity…

    1. Highest
    2. 0
    3. 5
    4. 400
    Show the answer

    Answer: B. 0

    0.

Practice this lesson with interactive questions

Lesson 3: Distance-time graphs

TEKS 7.7C

What you will learn

I can analyze and graph the distance–time relationships of moving objects.

I can read distance–time graphs and find speed from the slope.

Key vocabulary

distance-time graph
A graph with time on the x-axis and distance on the y-axis.
Examples: A straight line up; A flat line
slope
How steep a line is: rise divided by run.
Examples: 40 m in 10 s is 4 m/s; A steeper line is faster
constant speed
Moving the same distance each unit of time, shown by a straight line.
Examples: 5 m every second; Cruise control

Worked example

A graph goes from (0 s, 0 m) to (10 s, 40 m) in a straight line. Describe the motion.

  1. A straight sloped line means constant speed.
    The distance increases by the same amount each second.
  2. Slope = rise ÷ run = 40 ÷ 10 = 4 m/s.
    On a distance–time graph, the slope equals the speed.
  3. The object moves 4 m every second.
    Reading the slope turns a picture into a number we can use.

Strategy: Read, slope, interpret

Check your understanding

  1. The slope of a distance–time graph is…

    1. Time
    2. Force
    3. Mass
    4. Speed
    Show the answer

    Answer: D. Speed

    Speed.

  2. A flat line means…

    1. Fast
    2. Speeding up
    3. At rest
    4. Backward
    Show the answer

    Answer: C. At rest

    At rest.

  3. 40 ÷ 10 =

    1. 400
    2. 4
    3. 0.4
    4. 50
    Show the answer

    Answer: B. 4

    4.

Practice this lesson with interactive questions

Lesson 4: Newton’s first law

TEKS 7.7D

What you will learn

I can investigate and describe Newton’s first law and inertia.

I can explain inertia and how it affects objects at rest and in motion.

Key vocabulary

inertia
The tendency of an object to resist changes in its motion.
Examples: A heavy cart is hard to start; A passenger lurches forward
Newton’s first law
An object at rest stays at rest and an object in motion stays in motion at constant velocity unless acted on by an unbalanced force.
Examples: A puck sliding on ice; A tablecloth pulled quickly
net force
The overall force on an object after adding all the forces.
Examples: 40 N − 40 N = 0; 40 N − 10 N = 30 N

Worked example

A car stops suddenly and passengers lurch forward. Explain.

  1. The passengers were moving with the car.
    Their bodies share the car’s speed, so their bodies carried the same forward motion as the car.
  2. The car brakes, but nothing pulls the passengers back.
    With no unbalanced force on them, they keep moving forward by inertia.
  3. Seat belts supply the unbalanced force.
    The belt pushes against the body to slow it safely.

Strategy: At rest or moving?

Check your understanding

  1. Inertia is…

    1. Heat
    2. Speed
    3. A force
    4. Resistance to change in motion
    Show the answer

    Answer: D. Resistance to change in motion

    Resistance.

  2. Newton’s first law needs…

    1. Balanced force
    2. No force
    3. An unbalanced force to change motion
    4. Heat
    Show the answer

    Answer: C. An unbalanced force to change motion

    Unbalanced.

  3. More mass means…

    1. Less inertia
    2. More inertia
    3. Same
    4. None
    Show the answer

    Answer: B. More inertia

    More.

Practice this lesson with interactive questions

Lesson 5: Conduction, convection and radiation

TEKS 7.8A

What you will learn

I can investigate and describe heat transfer by conduction, convection and radiation.

I can identify conduction, convection and radiation in examples.

Key vocabulary

conduction
Heat transfer by direct contact between particles.
Examples: A hot spoon in soup; A pan on a stove
convection
Heat transfer by the movement of fluids (liquids or gases).
Examples: Boiling water; A sea breeze
radiation
Heat transfer by electromagnetic waves, with no matter needed.
Examples: Sunlight; A campfire’s glow

Worked example

Identify the heat transfer: a hot pan handle, boiling water, and a campfire warming your face.

  1. Pan handle: conduction.
    Heat passes from particle to particle through the solid metal.
  2. Boiling water: convection.
    Hot water rises, cool water sinks, creating a circular current.
  3. Campfire on your face: radiation.
    Infrared waves cross the air and are absorbed by your skin, with no contact needed.

Strategy: Touch, flow or wave?

Check your understanding

  1. Conduction needs…

    1. Light
    2. Wind
    3. A vacuum
    4. Contact
    Show the answer

    Answer: D. Contact

    Contact.

  2. Convection happens in…

    1. A vacuum
    2. Solids
    3. Fluids
    4. Rocks
    Show the answer

    Answer: C. Fluids

    Fluids.

  3. Radiation can cross…

    1. Empty space
    2. Only air
    3. Only water
    4. Only solids
    Show the answer

    Answer: A. Empty space

    Empty space.

Practice this lesson with interactive questions

Lesson 6: Thermal equilibrium

TEKS 7.8B

What you will learn

I can investigate thermal equilibrium and heat flow from warmer to cooler objects.

I can predict the final temperature when objects reach thermal equilibrium.

Key vocabulary

thermal equilibrium
The state in which two objects in contact reach the same temperature and no net heat flows.
Examples: Ice cube and water reaching 0°C; A cold soda warming to room temperature
heat
The transfer of thermal energy from a warmer object to a cooler one.
Examples: Heat leaving cocoa; Heat from a stove
specific heat
The energy needed to raise 1 g of a substance by 1°C.
Examples: Water 4.18 J/g°C; Iron 0.45 J/g°C

Worked example

A 90°C cup of tea is left in a 20°C room. Describe what happens.

  1. Heat flows from the warmer tea to the cooler air.
    Energy always moves from higher to lower temperature.
  2. The tea cools and the air warms slightly.
    The room is huge, so its temperature barely changes.
  3. Eventually the tea is 20°C: thermal equilibrium.
    Heat stops flowing when both are at the same temperature.

Strategy: Hot to cold

Check your understanding

  1. Heat flows from…

    1. Both
    2. Neither
    3. Cooler to warmer
    4. Warmer to cooler
    Show the answer

    Answer: D. Warmer to cooler

    Warmer to cooler.

  2. At thermal equilibrium…

    1. One is hotter
    2. Temperatures are equal
    3. Nothing exists
    4. Heat increases
    Show the answer

    Answer: B. Temperatures are equal

    Equal.

  3. (80 + 20) ÷ 2 =

    1. 50
    2. 40
    3. 60
    4. 100
    Show the answer

    Answer: A. 50

    50.

Practice this lesson with interactive questions

Lesson 7: Temperature and particle energy

TEKS 7.8C

What you will learn

I can relate temperature to the average kinetic energy of particles.

I can explain temperature as the average kinetic energy of particles.

Key vocabulary

temperature
A measure of the average kinetic energy of the particles in a substance.
Examples: Hot water particles move fast; Ice particles move slowly
absolute zero
The lowest possible temperature, 0 K or −273°C, where particle motion is at a minimum.
Examples: −273.15°C; Coldest limit
thermal energy
The total kinetic and potential energy of all particles in a substance.
Examples: A bathtub holds more than a cup; A lake

Worked example

Compare the particle motion in water at 10°C and 90°C.

  1. Particles in 90°C water have more kinetic energy.
    Temperature is the average kinetic energy of the particles.
  2. They move faster and collide harder.
    Faster motion is the same as higher kinetic energy.
  3. That is why hot water dissolves sugar faster.
    Collisions are quicker and more forceful, so particle behavior explains what we observe.

Strategy: Temperature, motion, energy

Check your understanding

  1. Temperature measures…

    1. Mass
    2. Total energy
    3. Average kinetic energy
    4. Volume
    Show the answer

    Answer: C. Average kinetic energy

    Average kinetic energy.

  2. Hotter means particles move…

    1. Slower
    2. Faster
    3. Same
    4. Stop
    Show the answer

    Answer: B. Faster

    Faster.

  3. 25 + 273 =

    1. 298
    2. 300
    3. 25
    4. 248
    Show the answer

    Answer: A. 298

    298.

Practice this lesson with interactive questions