Grade 8 Mathematics Unit 3: Transformations, Dilations & Similarity
This Grade 8 Mathematics unit, Transformations, Dilations & Similarity, has 5 lessons that cover TEKS 8.10A, 8.10B, 8.10C, 8.3A, 8.3B, 8.3C, 8.10D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
STAAR connection: Grade 8 Mathematics is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.
TEKS covered in this unit
- 8.10A generalize the properties of orientation and congruence of rotations, reflections, translations, and dilations of two-dimensional shapes on a coordinate plane
- 8.10B differentiate between transformations that preserve congruence and those that do not
- 8.10C explain the effect of translations, reflections over the x- or y-axis, and rotations limited to 90°, 180°, 270°, and 360° as applied to two-dimensional shapes on a coordinate plane using an algebraic representation
- 8.3A generalize that the ratio of corresponding sides of similar shapes are proportional, including a shape and its dilation
- 8.3B compare and contrast the attributes of a shape and its dilation(s) on a coordinate plane
- 8.3C use an algebraic representation to explain the effect of a given positive rational scale factor applied to two-dimensional figures on a coordinate plane with the origin as the center of dilation
- 8.10D model the effect on linear and area measurements of dilated two-dimensional shapes
Lesson 1: Orientation and congruence of transformations
TEKS 8.10A 8.10B
What you will learn
I can generalize how translations, reflections, rotations and dilations affect orientation and congruence, and tell which transformations keep a figure congruent.
I can compare a figure and its image using congruent, orientation and preserves.
Key vocabulary
- congruent
- Figures that have exactly the same size and shape: all matching sides and angles are equal.
Examples: A triangle and its translation; A triangle and its reflection - orientation
- The order and direction the vertices go around a figure, such as A→B→C counterclockwise.
Examples: Same order after a rotation; Reversed order after a reflection - transformation
- A rule that moves or changes a figure: translation (slide), reflection (flip), rotation (turn) or dilation (resize).
Examples: Slide 3 right; Flip over the y-axis
Worked example
Triangle ABC has A(1, 1), B(4, 1), C(1, 3). Part A: reflect the ORIGINAL triangle over the y-axis. Part B: start over from the ORIGINAL triangle and dilate it by scale factor 2. (These are two separate transformations, not one after the other.) Compare each image with the original.
- Part A (reflection), step 1: apply (x, y) → (−x, y) to the original. A′(−1, 1), B′(−4, 1), C′(−1, 3).
The rule for reflection over the y-axis is (x, y) → (−x, y). - Part A, step 2: compare with the original. AB = 3 and A′B′ = 3; AC = 2 and A′C′ = 2. Same size and shape, so congruent. A→B→C goes counterclockwise but A′→B′→C′ goes clockwise: orientation is reversed.
Reflections preserve distance but reverse orientation. It is a mirror image. - Part B (dilation), step 1: go back to the ORIGINAL and apply (x, y) → (2x, 2y). A′(2, 2), B′(8, 2), C′(2, 6).
Each coordinate of the original is multiplied by the scale factor 2. This image comes from the original, not from Part A. - Part B, step 2: compare with the original. Sides become 6 and 4, so it is NOT congruent. The order A→B→C stays counterclockwise: orientation is preserved.
Dilations keep shape and orientation but change size.
Strategy: Measure, Trace, Decide
- Measure corresponding sides (same lengths → congruent).
- Trace the vertex order A→B→C on both figures.
- Decide which properties are preserved.
Check your understanding
Which transformation does NOT preserve congruence?
- A rotation
- A reflection
- A translation
- A dilation with scale factor 2
Show the answer
Answer: D. A dilation with scale factor 2
Translations, reflections and rotations keep side lengths. A dilation by 2 doubles them.
Which transformation reverses orientation?
- A dilation with scale factor 3
- A rotation
- A translation
- A reflection
Show the answer
Answer: D. A reflection
A reflection flips the figure, reversing the order the vertices go around.
A triangle with sides 3, 4 and 5 is rotated 90° about the origin. Which describes the image?
- Not congruent, with sides 6, 8, 10
- Congruent, with the orientation reversed
- Congruent, with sides 3, 4, 5 and the same orientation
- Not congruent, with the same orientation
Show the answer
Answer: C. Congruent, with sides 3, 4, 5 and the same orientation
Rotations preserve both congruence and orientation.
Lesson 2: Translations, reflections & rotations with coordinate rules
TEKS 8.10C
What you will learn
I can use algebraic rules to explain the effect of translations, reflections over the x- or y-axis, and rotations of 90°, 180°, 270° and 360° on a figure on the coordinate plane.
I can describe how a transformation changes coordinates using (x, y) → (___, ___) and the words image and preimage.
Key vocabulary
- translation
- A slide: every point moves the same distance in the same direction. Rule: (x, y) → (x + a, y + b).
Examples: (x, y) → (x + 3, y − 6); Slide 4 left - reflection
- A flip over a line. Over the x-axis: (x, y) → (x, −y). Over the y-axis: (x, y) → (−x, y).
Examples: (4, −3) over the y-axis → (−4, −3); (5, 2) over the x-axis → (5, −2) - rotation
- A turn about the origin. Counterclockwise: 90° (−y, x); 180° (−x, −y); 270° (y, −x); 360° (x, y).
Examples: (3, 1) turned 90° → (−1, 3); (2, 5) turned 180° → (−2, −5)
Worked example
Point P(3, −2) is translated by (x, y) → (x − 4, y + 5), then reflected over the x-axis, then rotated 90° counterclockwise about the origin. Find the final image.
- Translate: (3 − 4, −2 + 5) = (−1, 3).
Apply the rule to each coordinate. - Reflect over the x-axis: (x, −y) = (−1, −3).
Reflection over the x-axis changes the sign of y. - Rotate 90° counterclockwise: (−y, x) = (3, −1).
Use the 90° rule with x = −1 and y = −3: −(−3) = 3. - Final image: (3, −1).
Check: each step uses the output of the previous step.
Strategy: Rule, Substitute, Chain
- Rule: write (x, y) → (___, ___) for each step.
- Substitute carefully, keeping negative signs.
- Chain: use each answer as the next input.
Check your understanding
What is the image of (4, −3) after a reflection over the y-axis?
- (3, −4)
- (−4, 3)
- (4, 3)
- (−4, −3)
Show the answer
Answer: D. (−4, −3)
(x, y) → (−x, y), so (4, −3) → (−4, −3).
Which rule describes a rotation of 180° about the origin?
- (x, y) → (x, y)
- (x, y) → (y, −x)
- (x, y) → (−y, x)
- (x, y) → (−x, −y)
Show the answer
Answer: D. (x, y) → (−x, −y)
A half turn sends (1, 0) to (−1, 0) and (0, 1) to (0, −1): both signs change.
What is the image of (2, 5) after a 270° counterclockwise rotation about the origin?
- (−5, 2)
- (5, −2)
- (−5, −2)
- (−2, −5)
Show the answer
Answer: B. (5, −2)
(x, y) → (y, −x), so (2, 5) → (5, −2).
Lesson 3: Similar shapes and their dilations
TEKS 8.3A 8.3B
What you will learn
I can show that the ratios of corresponding sides of similar shapes are proportional, including a shape and its dilation, and compare the attributes of a shape and its dilation on a coordinate plane.
I can compare a shape and its dilation using corresponding sides, ratio, similar and scale factor.
Key vocabulary
- similar figures
- Figures with the same shape but not necessarily the same size: equal corresponding angles and proportional corresponding sides.
Examples: A rectangle and its dilation; A 4 by 6 and a 6 by 9 rectangle - corresponding sides
- Sides in the same position in two figures.
Examples: Width of the original and width of the image; AB and A′B′ - ratio of corresponding sides
- Image side ÷ original side. In a dilation it is the same for every pair and equals the scale factor.
Examples: 6/3 = 4/2 = 2; 9/6 = 6/4 = 1.5
Worked example
A 3 by 2 rectangle is dilated to a 6 by 4 rectangle. Show that the sides are proportional and compare the attributes.
- Corresponding sides: 3 → 6 and 2 → 4.
Match width to width and height to height. - Ratios: 6 ÷ 3 = 2 and 4 ÷ 2 = 2.
Equal ratios mean the sides are proportional. - All angles are 90° in both rectangles.
A dilation keeps angle measures the same. - Perimeter: 10 → 20, which is also × 2. The shapes are similar with scale factor 2.
Lengths scale by k; angles do not change.
Strategy: Match, Divide, Compare
- Match corresponding sides.
- Divide image ÷ original for each pair.
- Compare: equal ratios and equal angles mean similar.
Check your understanding
A triangle with sides 3, 4 and 5 is dilated to a triangle with sides 6, 8 and 10. What is the scale factor?
- 5
- 1/2
- 3
- 2
Show the answer
Answer: D. 2
Every ratio is 2, so the scale factor is 2.
Are a 4 by 6 rectangle and a 6 by 9 rectangle similar?
- No; 6 − 4 ≠ 9 − 6
- No; the areas are different
- Yes; both pairs of sides have a ratio of 1.5
- Yes; both are rectangles
Show the answer
Answer: C. Yes; both pairs of sides have a ratio of 1.5
6/4 = 1.5 and 9/6 = 1.5, so the sides are proportional.
Are a 4 by 6 rectangle and a 6 by 10 rectangle similar?
- Yes; both have 90° angles
- No; 6/4 = 1.5 but 10/6 ≈ 1.67
- No; they have different angles
- Yes; both ratios are 1.5
Show the answer
Answer: B. No; 6/4 = 1.5 but 10/6 ≈ 1.67
The ratios differ, so the sides are not proportional. Equal angles alone are not enough for rectangles.
Lesson 4: Dilations with scale factor k (center at the origin)
TEKS 8.3C
What you will learn
I can use an algebraic rule (x, y) → (kx, ky) to explain what a positive scale factor k does to a figure on the coordinate plane when the origin is the center of dilation.
I can describe a dilation using the words scale factor, enlargement, reduction and image.
Key vocabulary
- dilation
- A transformation that changes the size of a figure but not its shape.
Examples: Zooming a photo in; A triangle (2,4,6) → (4,8,12) - scale factor
- The number k you multiply every coordinate by in a dilation centered at the origin.
Examples: k = 2 (enlargement); k = 1/2 (reduction) - center of dilation
- The fixed point the figure is stretched from or shrunk toward. In this lesson it is the origin.
Examples: (0, 0); The point where the dotted rays meet
Worked example
Triangle ABC has A(1, 1), B(3, 1), C(2, 3). Dilate it by scale factor 3 with the origin as center. Find A′B′C′.
- Write the rule: (x, y) → (3x, 3y).
The scale factor k = 3 multiplies both coordinates. - A(1, 1) → (3·1, 3·1) = A′(3, 3).
Multiply x and y separately. - B(3, 1) → B′(9, 3). C(2, 3) → C′(6, 9).
Same rule for every vertex. - Because k = 3 > 1, the image is an enlargement, 3 times as long on every side.
Check: AB = 2 and A′B′ = 6, which is 3 × 2.
Strategy: Rule, Apply, Reasonable?
- Rule: write (x, y) → (kx, ky) first.
- Apply it to one vertex at a time and list the results.
- Reasonable? k > 1 should give a bigger figure; k < 1 smaller.
Check your understanding
Point P(4, −6) is dilated by scale factor 1/2 with the origin as center. What are the coordinates of P′?
- (4.5, −5.5)
- (2, 3)
- (8, −12)
- (2, −3)
Show the answer
Answer: D. (2, −3)
(4·1/2, −6·1/2) = (2, −3).
Triangle ABC has A(2, 1), B(4, 1), C(4, 3). It is dilated by scale factor 3. What are the coordinates of B′?
- (6, 1)
- (7, 4)
- (12, 3)
- (12, 9)
Show the answer
Answer: C. (12, 3)
(3·4, 3·1) = (12, 3).
The rule (x, y) → (0.25x, 0.25y) is applied to a figure. What does it do?
- An enlargement by a factor of 4
- A reduction: every side becomes 1/4 as long
- A translation 0.25 units toward the origin
- A reduction: every side becomes 0.25 units shorter
Show the answer
Answer: B. A reduction: every side becomes 1/4 as long
k = 0.25 = 1/4, which is between 0 and 1, so lengths are multiplied by 1/4.
Lesson 5: Effect of dilations on length and area
TEKS 8.10D
What you will learn
I can model how a dilation affects the linear measurements (lengths, perimeter) and the area of a two-dimensional shape.
I can explain that lengths change by k and area changes by k squared, using scale factor, linear and area.
Key vocabulary
- scale factor (k)
- The number each length is multiplied by in a dilation.
Examples: k = 4; k = 1/2 - linear measurement
- A measurement in one dimension: side length, perimeter, height.
Examples: A side of 5 cm → 20 cm when k = 4; Perimeter 28 → 14 when k = 1/2 - area
- The amount of surface a shape covers, in square units.
Examples: A 3 by 2 rectangle has area 6; Area 6 → 54 when k = 3
Worked example
A 3 by 2 rectangle is dilated by a scale factor of 3. How do the perimeter and area change?
- New sides: 3(3) = 9 and 2(3) = 6.
Lengths are multiplied by k. - Perimeter: 2(3 + 2) = 10 → 2(9 + 6) = 30. That is 3 times the original.
Perimeter is a linear measurement, so it is multiplied by k. - Area: 3 × 2 = 6 → 9 × 6 = 54.
Compute both areas from the side lengths. - 54 ÷ 6 = 9 = 3². The area is multiplied by k².
Two dimensions each grew by 3, so area grew by 3 × 3.
Strategy: Lengths ×k, Area ×k²
- Lengths and perimeter: multiply by k.
- Area: multiply by k².
- Check by computing the new shape directly.
Check your understanding
A side of a figure is 5 cm. The figure is dilated by a scale factor of 4. How long is the matching side of the image?
- 80 cm
- 25 cm
- 9 cm
- 20 cm
Show the answer
Answer: D. 20 cm
5 × 4 = 20 cm.
A square has a side of 4 units. It is dilated by a scale factor of 3. What is the area of the image?
- 16 square units
- 48 square units
- 144 square units
- 36 square units
Show the answer
Answer: C. 144 square units
The new side is 12 and 12² = 144. Check: original area 16 × 3² = 144.
A triangle has an area of 10 cm². It is dilated by a scale factor of 2. What is the area of the image?
- 40 cm²
- 100 cm²
- 30 cm²
- 20 cm²
Show the answer
Answer: A. 40 cm²
k² = 4, and 10 × 4 = 40.