Texas Test Academy

Take learning by the horns.

Grade 8 Science Unit 5: Organisms and Heredity

This Grade 8 Science unit, Organisms and Heredity, has 6 lessons that cover TEKS 8.12A, 8.12B, 8.12C, 8.13A, 8.13B, 8.13C. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

STAAR connection: Grade 8 Science is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.

TEKS covered in this unit

Lesson 1: Disruptions in food webs

TEKS 8.12A

What you will learn

I can explain how population changes, natural disasters and human actions disrupt energy transfer in a food web.

I can follow the energy through a food web and predict how a disruption spreads.

Key vocabulary

trophic level
A feeding step in a food chain or web: producers, primary consumers, secondary consumers and so on.
Examples: Grass is level 1; rabbit is level 2; Hawk at the top
10% rule
Only about 10% of the energy at one trophic level is passed to the next; the rest is used or lost as heat.
Examples: 10,000 J in grass gives about 1,000 J to rabbits; Fewer hawks than rabbits
keystone species
A species that has a very large effect on its ecosystem compared with its numbers.
Examples: Sea otters that control urchins; Wolves in Yellowstone

Worked example

A grassland receives 10,000 J of energy stored in grass. Use the 10% rule to estimate the energy available to grasshoppers, frogs and snakes.

  1. Grass (producers): 10,000 J.
    Producers capture the energy from the Sun, so all the energy in the web begins here.
  2. Grasshoppers get about 10% of 10,000 J = 1,000 J.
    The rest of the energy is used in the grass’s own life processes, lost as heat or left uneaten.
  3. Frogs get about 10% of 1,000 = 100 J, and snakes about 10 J.
    Each step passes about one-tenth upward, so the energy drops quickly with each level.
  4. Conclusion: the top levels have little energy, so few top predators exist.
    This explains why ecosystems have many more plants than hawks, and why an energy pyramid has a wide base.

Strategy: Energy in, energy up, disruption, spread

Check your understanding

  1. About how much energy passes from one trophic level to the next?

    1. 1%
    2. 50%
    3. 100%
    4. About 10%
    Show the answer

    Answer: D. About 10%

    About 10% moves up each level.

  2. Why are there fewer top predators than herbivores?

    1. They eat only plants
    2. They are small
    3. They are lazy
    4. Little energy reaches the top
    Show the answer

    Answer: D. Little energy reaches the top

    Energy decreases at each level.

  3. What happens to a food web if the producers die?

    1. Predators increase
    2. Nothing
    3. Every level above loses its energy source
    4. Decomposers disappear first
    Show the answer

    Answer: C. Every level above loses its energy source

    All consumers depend on producers.

Practice this lesson with interactive questions

Lesson 2: Succession after disruption

TEKS 8.12B

What you will learn

I can describe primary and secondary succession and how they change populations and species diversity after a disruption.

I can tell primary from secondary succession and name pioneer species.

Key vocabulary

primary succession
Succession that begins on bare rock with no soil, such as after a lava flow.
Examples: Lichen growing on new volcanic rock; Plants on land left by a glacier
secondary succession
Succession that begins where soil remains after a disturbance, such as a fire or flood.
Examples: A forest regrowing after a fire; A farm field turning to forest
pioneer species
The first organisms, such as lichens, mosses or grasses, to live in a disturbed area.
Examples: Lichen on bare rock; Fireweed after a fire

Worked example

A volcano forms a new island of bare lava rock. Describe how life can establish there.

  1. Primary succession begins because there is no soil.
    Without soil, plants cannot root, so the first stage needs organisms that can live on rock.
  2. Pioneer species such as lichens and mosses settle on the rock.
    They need little more than light, air and moisture, and they release acids that slowly break down the rock.
  3. Broken rock and dead lichens build thin soil, which lets grasses and small plants grow.
    Each stage prepares the ground for the next by adding material and holding water.
  4. Later shrubs and trees arrive, and animals follow as food and shelter appear.
    Species diversity increases as the habitat becomes richer, which usually takes hundreds of years on bare rock.

Strategy: Starting point, pioneers, changes, diversity

Check your understanding

  1. Which is primary succession?

    1. A flower garden
    2. A farm field returning to forest
    3. A forest regrowing after a fire
    4. Lichens growing on new lava rock
    Show the answer

    Answer: D. Lichens growing on new lava rock

    Primary succession starts with no soil.

  2. Why is secondary succession faster?

    1. It has fewer plants
    2. It has more rain
    3. It is warmer
    4. Soil and seeds remain
    Show the answer

    Answer: D. Soil and seeds remain

    Soil is already present.

  3. What is a pioneer species?

    1. The last species
    2. The first species to colonize a disturbed area
    3. An animal only
    4. The largest tree
    Show the answer

    Answer: B. The first species to colonize a disturbed area

    Pioneers arrive first.

Practice this lesson with interactive questions

Lesson 3: Biodiversity and stability

TEKS 8.12C

What you will learn

I can explain how biodiversity helps an ecosystem stay stable, supply resources and keep organisms healthy.

I can describe biodiversity and explain why more species usually means a more stable ecosystem.

Key vocabulary

biodiversity
The variety of living things in an ecosystem, including species and genetic differences.
Examples: A coral reef with hundreds of species; A prairie with many plants
sustainability
Using resources in a way that meets present needs without harming the ability of future generations to meet theirs.
Examples: Replanting trees after logging; Catching only as many fish as can be replaced
monoculture
A large area planted with only one kind of crop.
Examples: A cornfield of one hybrid; A banana plantation of one variety

Worked example

Two fields are hit by a disease that kills one type of grass. Field A has 1 grass species. Field B has 12 grass species. Compare the results.

  1. In Field A, the disease kills the only species, so the field becomes bare.
    With only one species, a single weakness can remove all producers at once.
  2. In Field B, 11 species survive and keep growing.
    Each species has different weaknesses, so a threat that harms one usually leaves others alone.
  3. Animals in Field B still have food, so the food web remains intact.
    Because producers remain, consumers can continue to get energy and the web stays stable.
  4. Conclusion: higher biodiversity gives the ecosystem a backup.
    Having several species that do similar jobs means that when one fails, another can fill the role, which is stability.

Strategy: Many species, backup roles, stability, benefit

Check your understanding

  1. What is biodiversity?

    1. The weather
    2. The color of a plant
    3. The size of an animal
    4. The variety of living things in an ecosystem
    Show the answer

    Answer: D. The variety of living things in an ecosystem

    Biodiversity is variety of life.

  2. Why is a monoculture risky?

    1. It is too diverse
    2. It has many species
    3. One disease can destroy the whole crop
    4. It uses no soil
    Show the answer

    Answer: C. One disease can destroy the whole crop

    A single threat can harm everything.

  3. How does biodiversity support stability?

    1. It adds no benefit
    2. Other species can fill the role if one fails
    3. It prevents all change
    4. It makes food webs simple
    Show the answer

    Answer: B. Other species can fill the role if one fails

    Backup species keep the system working.

Practice this lesson with interactive questions

Lesson 4: Cell structures and their functions

TEKS 8.13A

What you will learn

I can identify what the cell membrane, cell wall, nucleus, ribosomes, cytoplasm, mitochondria, chloroplasts and vacuoles do in plant and animal cells.

I can match each organelle to its function.

Key vocabulary

organelle
A structure inside a cell that has a specific job.
Examples: Nucleus; Mitochondria
mitochondria
Organelles that release usable energy from food in a process called cellular respiration.
Examples: Muscle cells have many; Release energy as ATP
chloroplast
An organelle in plant cells that captures light energy to make sugar by photosynthesis.
Examples: Leaf cells; Algae cells

Worked example

Compare the structures of a plant cell and an animal cell and say what each shared and unique organelle does.

  1. Both have a nucleus, cytoplasm, cell membrane, ribosomes and mitochondria.
    These are the basic parts every cell needs to control itself, make proteins and release energy.
  2. The nucleus holds the DNA, which controls the cell’s activities.
    Like a control center, it stores the instructions for making proteins.
  3. Only plant cells have a cell wall, chloroplasts and a large central vacuole.
    These structures fit the plant’s needs: the wall gives support, chloroplasts make food and the vacuole stores water.
  4. Animal cells rely on mitochondria for energy from food they eat.
    Since animals cannot make their own food, they depend on respiration to release the energy.

Strategy: Part, job, cell type, fit

Check your understanding

  1. Which organelle holds DNA?

    1. Cell wall
    2. Ribosome
    3. Vacuole
    4. Nucleus
    Show the answer

    Answer: D. Nucleus

    The nucleus holds DNA.

  2. Which organelle releases energy from food?

    1. Ribosome
    2. Chloroplast
    3. Mitochondria
    4. Nucleus
    Show the answer

    Answer: C. Mitochondria

    Mitochondria release energy.

  3. Which is found only in plant cells?

    1. Nucleus
    2. Chloroplast
    3. Cell membrane
    4. Cytoplasm
    Show the answer

    Answer: B. Chloroplast

    Chloroplasts are plant cell structures.

Practice this lesson with interactive questions

Lesson 5: Genes, chromosomes and inherited traits

TEKS 8.13B

What you will learn

I can describe how genes on chromosomes determine inherited traits and use a Punnett square to predict offspring.

I can use a Punnett square and tell dominant from recessive.

Key vocabulary

gene
A section of DNA on a chromosome that carries instructions for a trait.
Examples: A gene for flower color; A gene for eye color
allele
One version of a gene; offspring get one allele from each parent.
Examples: Purple (P) or white (p) flower allele; A allele for brown or blue eyes
dominant and recessive
A dominant allele shows when present; a recessive allele shows only when two copies are present.
Examples: P is dominant over p in pea flowers; pp shows white flowers

Worked example

In pea plants, purple flowers (P) are dominant over white (p). Cross two heterozygous plants (Pp × Pp). Find the chance of white flowers.

  1. Set up a Punnett square: parent 1 alleles P and p across the top, parent 2 alleles P and p down the side.
    Each parent passes one allele to the offspring, so the square shows every possible combination.
  2. Fill the boxes: PP, Pp, Pp, pp.
    Combining the top and side letters gives the genotypes of each possible offspring.
  3. Only pp shows white flowers, so 1 out of 4 boxes, or 25%.
    A recessive trait needs two recessive alleles, so only one of the four combinations shows it.
  4. The other 75% (PP, Pp, Pp) have purple flowers.
    A dominant allele hides the recessive one, so Pp plants look purple even though they carry p.

Strategy: Alleles, square, genotypes, probability

Check your understanding

  1. Which genotype shows a recessive trait?

    1. None
    2. Pp
    3. PP
    4. pp
    Show the answer

    Answer: D. pp

    Recessive traits need two recessive alleles.

  2. In a Pp × Pp cross, what fraction of offspring are pp?

    1. 3 out of 4
    2. 1 out of 2
    3. 1 out of 4
    4. All
    Show the answer

    Answer: C. 1 out of 4

    One of four boxes is pp.

  3. Where are genes located?

    1. On chromosomes
    2. In the cell wall
    3. In the air
    4. Outside cells
    Show the answer

    Answer: A. On chromosomes

    Genes are sections of chromosomal DNA.

Practice this lesson with interactive questions

Lesson 6: Variation and adaptation

TEKS 8.13C

What you will learn

I can explain how variation within a population produces adaptations that affect survival and reproduction over many generations.

I can explain variation, natural selection and adaptation.

Key vocabulary

variation
Differences in traits among individuals of the same species.
Examples: Some beetles are green and some are brown; Some finches have larger beaks
natural selection
The process in which organisms with helpful traits survive and reproduce more than others, so those traits become more common.
Examples: Dark moths surviving on dark bark; Bacteria resistant to a drug surviving
adaptation
An inherited trait that helps an organism survive and reproduce in its environment.
Examples: Thick fur in cold places; Long roots in dry places

Worked example

A population of beetles has green and brown individuals. Birds eat beetles on a brown forest floor. Explain what happens over generations.

  1. Variation exists: some beetles are green and some are brown.
    Without variation, natural selection has nothing to act on, so differences are the raw material.
  2. Birds see and eat green beetles more easily on brown ground.
    The environment applies selection pressure, since the color affects survival.
  3. Brown beetles survive longer and have more offspring.
    Offspring inherit their parents’ genes, so the allele for brown spreads.
  4. After many generations, most beetles are brown.
    The population has adapted to its environment, and no individual had to change.

Strategy: Variation, pressure, survival, inheritance

Check your understanding

  1. What is variation?

    1. A habitat
    2. A single trait
    3. Identical traits
    4. Differences in traits within a species
    Show the answer

    Answer: D. Differences in traits within a species

    Variation is differences among individuals.

  2. Which describes natural selection?

    1. Organisms choose to change
    2. Organisms with helpful traits survive and reproduce more
    3. Traits are never inherited
    4. All organisms survive
    Show the answer

    Answer: B. Organisms with helpful traits survive and reproduce more

    Natural selection favors helpful inherited traits.

  3. Why do antibiotic-resistant bacteria become common?

    1. The survivors reproduce and pass on resistance
    2. They are lucky
    3. The antibiotic creates resistance
    4. Bacteria want to resist
    Show the answer

    Answer: A. The survivors reproduce and pass on resistance

    Resistant survivors multiply.

Practice this lesson with interactive questions