Texas Test Academy

Take learning by the horns.

Algebra I Unit 3: Graphing Linear Functions

This Algebra I unit, Graphing Linear Functions, has 7 lessons that cover TEKS A.3A, A.3B, A.3C, A.3E, A.3D, A.3F, A.3G, A.3H. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

STAAR connection: Algebra I is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.

TEKS covered in this unit

Lesson 1: Slope in every representation

TEKS A.3A

What you will learn

I can determine the slope of a line from a table, a graph, two points, and equations in slope-intercept, standard and point-slope form.

I can explain slope as rise over run and tell when it is zero or undefined.

Key vocabulary

slope
The steepness of a line: m = (change in y) ÷ (change in x) = rise ÷ run.
Examples: m = 3 for y = 3x − 2; m = (7 − 1) ÷ (4 − 2) = 3
slope formula
m = (y₂ − y₁) ÷ (x₂ − x₁) for the points (x₁, y₁) and (x₂, y₂).
Examples: (2, 1) and (6, 9): m = 8 ÷ 4 = 2; (0, 5) and (3, −1): m = −6 ÷ 3 = −2
slope in other forms
In y = mx + b the slope is m; in Ax + By = C the slope is −A ÷ B; in y − y₁ = m(x − x₁) the slope is m.
Examples: 2x + 4y = 8 has slope −½; y − 3 = 5(x − 1) has slope 5

Worked example

Find the slope of the line through (−2, 3) and (4, −9), and the slope of 6x + 3y = 12.

  1. Rise: −9 − 3 = −12. Run: 4 − (−2) = 6.
    Subtract in the same order in both.
  2. m = −12 ÷ 6 = −2.
    The line falls 2 for every 1 to the right.
  3. For 6x + 3y = 12, solve for y: 3y = −6x + 12, so y = −2x + 4.
    Isolate y to read the slope.
  4. The slope is −2 (−A ÷ B = −6 ÷ 3). Both lines have the same slope, so they are parallel.
    Standard-form shortcut: m = −A/B.

Strategy: Same Order, Isolate y

Check your understanding

  1. What is the slope of the line through (−2, 3) and (4, −9)?

    1. −6
    2. −1/2
    3. 2
    4. −2
    Show the answer

    Answer: D. −2

    m = (−9 − 3) ÷ (4 − (−2)) = −12 ÷ 6 = −2.

  2. A table shows x: 1, 3, 5, 7 and y: 4, 10, 16, 22. What is the slope?

    1. 1/3
    2. 2
    3. 6
    4. 3
    Show the answer

    Answer: D. 3

    y increases 6 when x increases 2, so m = 6 ÷ 2 = 3.

  3. What is the slope of 6x + 3y = 12?

    1. 6
    2. 2
    3. −2
    4. −6
    Show the answer

    Answer: C. −2

    3y = −6x + 12, so y = −2x + 4 and m = −2.

Practice this lesson with interactive questions

Lesson 2: Rate of change in context

TEKS A.3B

What you will learn

I can calculate and interpret the rate of change of a linear function from a table, a graph, or an equation in real-world problems.

I can state a rate of change with its units and say what it means in the situation.

Key vocabulary

rate of change
How one quantity changes compared with another; for a linear function it is constant and equals the slope.
Examples: $12 per hour; −3 degrees per hour
unit rate
A rate that compares a quantity to exactly 1 of another unit.
Examples: 60 miles per hour; $1.25 per pound
increasing and decreasing
A function is increasing when y gets larger as x gets larger (m > 0) and decreasing when y gets smaller (m < 0).
Examples: Savings that grow weekly; Water left in a draining tank

Worked example

A savings account has $150 in week 2 and $270 in week 6. Find and interpret the rate of change.

  1. Change in money: 270 − 150 = $120.
    The amount that changed.
  2. Change in time: 6 − 2 = 4 weeks.
    The time it took.
  3. Rate = 120 ÷ 4 = 30 dollars per week.
    Divide the change in y by the change in x.
  4. Meaning: the account grows by $30 each week, so it is increasing.
    Say it with units and context.

Strategy: Change ÷ Change, Units, Meaning

Check your understanding

  1. A plant is 8 cm tall in week 1 and 20 cm tall in week 4. What is the rate of change?

    1. 6 cm per week
    2. 3 cm per week
    3. 12 cm per week
    4. 4 cm per week
    Show the answer

    Answer: D. 4 cm per week

    (20 − 8) ÷ (4 − 1) = 12 ÷ 3 = 4 centimeters per week.

  2. The cost of a rental is C = 0.25m + 12 dollars for m miles. What does 0.25 mean?

    1. The total cost is $0.25
    2. The car goes 0.25 miles per dollar
    3. The rental starts at $0.25
    4. Each mile driven adds $0.25 to the cost
    Show the answer

    Answer: D. Each mile driven adds $0.25 to the cost

    The slope 0.25 is the rate of change: $0.25 per mile. The 12 is the starting fee.

  3. A tank holds 90 gallons and drains at a steady rate. After 2 minutes it has 70 gallons. What is the rate of change?

    1. 10 gallons per minute
    2. −10 gallons per minute
    3. −45 gallons per minute
    4. −20 gallons per minute
    Show the answer

    Answer: B. −10 gallons per minute

    (70 − 90) ÷ 2 = −10. The tank is decreasing by 10 gallons each minute.

Practice this lesson with interactive questions

Lesson 3: Graphs and key features of linear functions

TEKS A.3C

What you will learn

I can graph a linear function and identify its x-intercept, y-intercept, zero and slope in mathematical and real-world problems.

I can use x-intercept, y-intercept, zero and slope to describe a graph.

Key vocabulary

y-intercept
The point where the graph crosses the y-axis, (0, b); the value of the function when x = 0.
Examples: (0, 4) for y = 2x + 4; A $20 membership fee
x-intercept and zero
The point (a, 0) where the graph crosses the x-axis. The x-value a is called a zero of the function because f(a) = 0.
Examples: (−2, 0) for y = 2x + 4; the zero is −2; When the tank is empty
key features
The slope, intercepts and zero that describe a graph and its meaning in a situation.
Examples: Slope 2, y-intercept 4, zero −2; Rate $5 per hour, start $20

Worked example

Graph 2x + 3y = 12 and identify its intercepts, zero and slope.

  1. x-intercept: set y = 0, so 2x = 12 and x = 6. Point (6, 0).
    Cover the y term.
  2. y-intercept: set x = 0, so 3y = 12 and y = 4. Point (0, 4).
    Cover the x term.
  3. Plot (6, 0) and (0, 4) and draw the line. Slope = (0 − 4) ÷ (6 − 0) = −2/3.
    Two points make a line.
  4. The zero of the function is 6. The line falls 2 for every 3 to the right.
    Check with a third point: (3, 2): 6 + 6 = 12 ✓.

Strategy: Cover Up, Plot, Read

Check your understanding

  1. What is the x-intercept of 2x + 3y = 12?

    1. (4, 0)
    2. (0, 6)
    3. (0, 4)
    4. (6, 0)
    Show the answer

    Answer: D. (6, 0)

    With y = 0: 2x = 12, so x = 6.

  2. What is the y-intercept of y = −3x + 9?

    1. (3, 0)
    2. (9, 0)
    3. (0, 9)
    4. (0, −3)
    Show the answer

    Answer: C. (0, 9)

    b = 9, so the line crosses the y-axis at (0, 9).

  3. What is the zero of f(x) = 4x − 20?

    1. −20
    2. 5
    3. 4
    4. −5
    Show the answer

    Answer: B. 5

    4x = 20 and x = 5. The zero is the x-value where the output is 0.

Practice this lesson with interactive questions

Lesson 4: Transformations of f(x) = x

TEKS A.3E

What you will learn

I can determine how the graph of f(x) = x changes when f(x) is replaced by af(x), f(x) + d, f(x − c) or f(bx) for positive and negative values.

I can explain vertical shift, horizontal shift, stretch, compression and reflection.

Key vocabulary

parent function
The simplest function of a family; for linear functions it is f(x) = x.
Examples: f(x) = x; f(x) = x² (parent of quadratics)
translation (shift)
A slide of the graph: f(x) + d moves it up d (down if d < 0); f(x − c) moves it right c (left if c < 0).
Examples: f(x) + 3 up 3; f(x − 2) right 2
stretch, compression and reflection
af(x) stretches vertically (|a| > 1) or shrinks (|a| < 1); a < 0 reflects over the x-axis. f(bx) compresses horizontally when |b| > 1; b < 0 reflects over the y-axis.
Examples: 2f(x) is steeper; −f(x) flips over the x-axis

Worked example

Describe how g(x) = 3f(x) − 2 compares with f(x) = x, and write g(x).

  1. 3f(x) multiplies each output by 3: a vertical stretch by a factor of 3 (steeper).
    a is outside the function.
  2. − 2 shifts the graph down 2.
    d moves it up or down.
  3. g(x) = 3(x) − 2 = 3x − 2.
    Substitute f(x) = x.
  4. Check: g(0) = −2 (down 2) and the slope is 3 ✓.
    Compare the key features.

Strategy: Inside or Outside

Check your understanding

  1. How does the graph of g(x) = f(x) + 4 compare with the graph of f(x) = x?

    1. It shifts down 4 units
    2. It is stretched by a factor of 4
    3. It shifts right 4 units
    4. It shifts up 4 units
    Show the answer

    Answer: D. It shifts up 4 units

    Adding 4 to every output moves the graph up 4.

  2. What is g(x) when g(x) = 5f(x) and f(x) = x?

    1. 5x, a line shifted right
    2. x + 5, a line shifted up
    3. 5x, a line that is steeper
    4. x/5, a line that is flatter
    Show the answer

    Answer: C. 5x, a line that is steeper

    Every y-value is multiplied by 5, so the slope is 5 (a vertical stretch).

  3. Which transformation of f(x) = x flips the graph over the x-axis?

    1. g(x) = f(x) − 1
    2. g(x) = −f(x)
    3. g(x) = 2f(x)
    4. g(x) = f(x + 1)
    Show the answer

    Answer: B. g(x) = −f(x)

    Multiplying the outputs by −1 reflects points across the x-axis.

Practice this lesson with interactive questions

Lesson 5: Graphing linear inequalities

TEKS A.3D

What you will learn

I can graph the solution set of a linear inequality in two variables on the coordinate plane.

I can explain boundary line, half-plane and why the line is dashed or solid.

Key vocabulary

half-plane
The region on one side of a boundary line; the solution set of a linear inequality.
Examples: The region above y = x; The region left of x = 3
dashed or solid boundary
Solid when points on the line are solutions (≤, ≥); dashed when they are not (<, >).
Examples: y > 2x: dashed; y ≤ 2x: solid
test point
A point not on the boundary (often (0, 0)) substituted to decide which side to shade.
Examples: (0, 0) for y < x + 2: true; (0, 0) for y > x + 2: false

Worked example

Graph 2x − y > 4.

  1. Solve for y: −y > −2x + 4, so y < 2x − 4 (the sign flips when dividing by −1).
    Isolating y makes the shading easy to read.
  2. Boundary: y = 2x − 4, dashed because the inequality is strict.
    Slope 2, y-intercept −4.
  3. Test (0, 0): 2(0) − 0 > 4 is 0 > 4, false, so shade the side that does NOT contain (0, 0).
    It agrees with y < 2x − 4 (below the line).
  4. Check (3, 0): 6 − 0 = 6 > 4 ✓ and it is in the shaded region.
    Test a point in the shading.

Strategy: Boundary, Style, Test, Shade

Check your understanding

  1. Which boundary line style is used for y ≥ 3x − 1?

    1. No boundary line
    2. Dotted
    3. Dashed
    4. Solid
    Show the answer

    Answer: D. Solid

    The inequality includes equality, so points on the line are solutions and the line is solid.

  2. For y < 2x + 1, which test point lies in the solution region?

    1. (1, 5)
    2. (0, 3)
    3. (0, 0)
    4. (−1, 0)
    Show the answer

    Answer: C. (0, 0)

    At (0, 0): 0 < 1 is true. (0, 3): 3 < 1 false; (1, 5): 5 < 3 false; (−1, 0): 0 < −1 false.

  3. Which region is shaded for y > −x + 4?

    1. Above the dashed line y = −x + 4
    2. Below the solid line y = −x + 4
    3. Above the solid line y = −x + 4
    4. Below the dashed line y = −x + 4
    Show the answer

    Answer: A. Above the dashed line y = −x + 4

    y > means above the boundary, and the line is dashed because it is strict.

Practice this lesson with interactive questions

Lesson 6: Graphing systems and estimating solutions

TEKS A.3F A.3G

What you will learn

I can graph a system of two linear equations, determine its solution if one exists, and estimate solutions graphically in real-world problems.

I can explain why a system has one solution, no solution or infinitely many solutions.

Key vocabulary

point of intersection
The point where two graphs cross; its coordinates are the solution of the system.
Examples: (2, 5) for y = 2x + 1 and y = −x + 7; The week two gym plans cost the same
types of solutions
Different slopes: exactly one solution. Same slope, different intercepts: no solution (parallel). Same slope and intercept: infinitely many solutions (same line).
Examples: y = 2x + 1 and y = 2x − 3: none; y = 2x + 1 and 2y = 4x + 2: infinitely many
estimate a solution
Use a graph to find the approximate coordinates of the intersection when it does not fall on grid lines.
Examples: About (3.5, 9); About 4 months and $75

Worked example

Gym A: y = 12x + 30. Gym B: y = 20x. When do they cost the same, and how much?

  1. Graph both lines. A starts at (0, 30) with slope 12; B starts at (0, 0) with slope 20.
    B is steeper, so it will catch up.
  2. They cross between x = 3 and x = 4: about (3.75, 75).
    Read the intersection from the graph.
  3. Check: 12(3.75) + 30 = 75 and 20(3.75) = 75 ✓.
    Substitute into both equations.
  4. Meaning: after about 4 months both gyms have cost about $75; after that Gym A is cheaper.
    Interpret the intersection in words.

Strategy: Graph, Read, Check, Interpret

Check your understanding

  1. What is the solution of y = x + 1 and y = −x + 5?

    1. (0, 1)
    2. (1, 4)
    3. (3, 2)
    4. (2, 3)
    Show the answer

    Answer: D. (2, 3)

    At (2, 3): 3 = 2 + 1 and 3 = −2 + 5. Both are true.

  2. How many solutions does the system y = 2x + 1 and y = 2x − 3 have?

    1. One solution
    2. None; the lines are parallel
    3. Two solutions
    4. Infinitely many solutions
    Show the answer

    Answer: B. None; the lines are parallel

    The slopes are equal (2) and the intercepts differ, so the lines never meet.

  3. How many solutions does y = 3x + 2 and 2y = 6x + 4 have?

    1. Infinitely many; they are the same line
    2. Exactly two
    3. Exactly one
    4. None
    Show the answer

    Answer: A. Infinitely many; they are the same line

    2y = 6x + 4 gives y = 3x + 2, the same line, so every point on it is a solution.

Practice this lesson with interactive questions

Lesson 7: Graphing systems of inequalities

TEKS A.3H

What you will learn

I can graph the solution set of a system of two linear inequalities in two variables.

I can explain overlapping regions, solution region and boundary lines.

Key vocabulary

system of inequalities
Two or more inequalities that must be true at the same time.
Examples: y > x and y < −x + 6; y ≥ 2 and x ≤ 5
solution region
The overlap of the shaded half-planes; every point in it makes every inequality true.
Examples: The wedge between two lines; A triangle formed by three inequalities
check with a test point
Substitute a point into EVERY inequality; it is a solution only if all are true.
Examples: (1, 4) for y > x and y < −x + 6; (0, 0) for y ≥ 2x − 1 and y ≤ x + 3

Worked example

Is (1, 4) a solution of the system y > x and y < −x + 6? Describe the solution region.

  1. Test y > x: 4 > 1 is true.
    First inequality.
  2. Test y < −x + 6: 4 < −1 + 6 = 5 is true.
    Second inequality.
  3. Both are true, so (1, 4) is a solution.
    It lies in the overlap.
  4. The region is above the dashed line y = x and below the dashed line y = −x + 6, a wedge that opens to the left.
    Both boundaries are dashed because both are strict.

Strategy: Graph Each, Overlap, Test

Check your understanding

  1. Is (1, 4) a solution of y > x and y < −x + 6?

    1. No; y < −x + 6 is false
    2. No; y > x is false
    3. Yes; both inequalities are true
    4. Yes; but only because it is on a boundary
    Show the answer

    Answer: C. Yes; both inequalities are true

    4 > 1 is true and 4 < 5 is true.

  2. Is (0, 0) a solution of y ≥ 2x − 1 and y ≤ x + 3?

    1. No; 0 ≥ −1 is false
    2. Yes
    3. Yes, but only if the lines are dashed
    4. No; 0 ≤ 3 is false
    Show the answer

    Answer: B. Yes

    0 ≥ −1 is true and 0 ≤ 3 is true.

  3. Which point is NOT a solution of x ≥ 0 and y ≥ 0 and x + y ≤ 5?

    1. (4, 3)
    2. (1, 0)
    3. (2, 2)
    4. (0, 5)
    Show the answer

    Answer: A. (4, 3)

    4 + 3 = 7, which is not ≤ 5.

Practice this lesson with interactive questions