Texas Test Academy

Take learning by the horns.

Chemistry Unit 1: Thinking and Working Like a Chemist

This Chemistry unit, Thinking and Working Like a Chemist, has 3 lessons that cover TEKS C.1A, C.1B, C.1C, C.1D, C.1E, C.1F, C.1G, C.2A and more. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Safety, tools, data and models

TEKS C.1A C.1B C.1C C.1D C.1E C.1F C.1G

What you will learn

I can plan a safe chemistry investigation, choose tools such as balances, probes and glassware, collect SI and qualitative data, and organize them in tables, graphs and particle diagrams.

I can read a safety data sheet and name the independent, dependent and controlled variables.

Key vocabulary

safety data sheet (SDS)
A document that lists a chemical’s hazards, safe handling, first aid and disposal.
Examples: The SDS for hydrochloric acid; Instructions for spill cleanup
quantitative data
Measurements with numbers and SI units, such as mass in grams or temperature in kelvins.
Examples: A mass of 12.40 g; A volume of 25.0 mL
particle diagram
A drawing that shows atoms or molecules as circles to model what happens at the particle level.
Examples: Circles showing H₂O molecules; A diagram of reactants and products

Worked example

A student plans to test how the temperature of water affects how fast an antacid tablet dissolves. Design the investigation.

  1. Question: How does water temperature (10°C, 25°C, 40°C, 55°C) affect the time for an antacid tablet to dissolve?
    A testable question names the factor that changes and the result that is measured, so the data can answer it.
  2. Independent variable: water temperature. Dependent variable: dissolving time in seconds.
    The temperature is what the student sets, and the time is what depends on it, so they go on different axes.
  3. Controlled variables: same tablet brand and size, same 100 mL of water, same stirring (none), same container.
    If the water volume or tablet size changed, the student could not tell whether temperature caused the difference.
  4. Run three trials per temperature and record seconds (quantitative) and notes about fizzing (qualitative).
    Three trials show whether the result is repeatable, and the notes may explain an odd time.

Strategy: Question, variables, safety, data, model

Check your understanding

  1. What does an SDS tell you?

    1. How to graph data
    2. The mass of the chemical
    3. The price of the chemical
    4. The hazards and safe handling of a chemical
    Show the answer

    Answer: D. The hazards and safe handling of a chemical

    An SDS lists hazards and handling.

  2. Which is quantitative data?

    1. The solid was shiny
    2. The smell was sharp
    3. The liquid turned blue
    4. A volume of 25.0 mL
    Show the answer

    Answer: D. A volume of 25.0 mL

    Measurements with units are quantitative.

  3. In a test of temperature on dissolving time, the dependent variable is…

    1. Tablet brand
    2. Water temperature
    3. Dissolving time
    4. Beaker size
    Show the answer

    Answer: C. Dissolving time

    The measured result is dependent.

Practice this lesson with interactive questions

Lesson 2: Analyzing data, math and explanations

TEKS C.2A C.2B C.2C C.2D C.3A C.3B C.3C

What you will learn

I can use mathematics to analyze data, evaluate models and designs, and write evidence-based explanations and arguments.

I can find percent error, spot sources of error and write a claim, evidence and reasoning statement.

Key vocabulary

percent error
The size of the difference between a measured and an accepted value, as a percent of the accepted value.
Examples: Measured 9.8 g/mL vs accepted 10.5 g/mL; A 6.7% error
precision
How close repeated measurements are to one another.
Examples: Trials of 5.01 g, 5.02 g and 5.01 g; Tight cluster of results
claim, evidence, reasoning
A way to build an explanation: a claim answers the question, evidence is data that supports it, and reasoning links the two with science ideas.
Examples: Higher temperature dissolves more sugar because...; Data table cited in the answer

Worked example

A student finds the density of aluminum to be 2.45 g/cm³. The accepted value is 2.70 g/cm³. Calculate the percent error and name a likely source of error.

  1. Subtract: |2.45 − 2.70| = 0.25 g/cm³.
    The absolute value makes the error positive, because percent error measures size, not direction.
  2. Divide by the accepted value: 0.25 ÷ 2.70 = 0.0926.
    Dividing by the accepted value compares the error with what the number should have been.
  3. Multiply by 100: percent error ≈ 9.3%.
    Converting to a percent makes it easy to compare with other experiments.
  4. A likely source is an air bubble clinging to the metal in the water displacement, which makes the volume read too large.
    A volume that is too large gives a density that is too small, which matches the measured 2.45.

Strategy: Calculate, check, claim, cite, connect

Check your understanding

  1. A measured value is 9.0 and the accepted value is 10.0. What is the percent error?

    1. 90%
    2. 9%
    3. 1%
    4. 10%
    Show the answer

    Answer: D. 10%

    |9.0 − 10.0| ÷ 10.0 × 100 = 10%.

  2. Which describes precision?

    1. A single reading
    2. Always correct
    3. Close to the true value
    4. Repeated measurements are close together
    Show the answer

    Answer: D. Repeated measurements are close together

    Precision is about agreement among trials.

  3. Evidence in a CER answer is…

    1. An opinion
    2. Data that support the claim
    3. A guess
    4. The question
    Show the answer

    Answer: B. Data that support the claim

    Evidence is data.

Practice this lesson with interactive questions

Lesson 3: Hypotheses, theories, laws and scientists

TEKS C.1H C.4A C.4B C.4C

What you will learn

I can distinguish hypotheses, theories and laws, critique explanations with evidence, and relate chemistry research to society and STEM careers.

I can tell a law (what happens) from a theory (why it happens).

Key vocabulary

hypothesis
A testable, proposed explanation for an observation, made before the test.
Examples: If temperature rises then reaction rate rises; A prediction to test
scientific theory
A well-tested explanation of why or how something happens, supported by a large body of evidence.
Examples: Atomic theory; Kinetic molecular theory
scientific law
A statement, often a mathematical relationship, that describes what happens under certain conditions.
Examples: Law of conservation of mass; Boyle’s law

Worked example

Classify each as a hypothesis, theory or law: (a) “If I add more catalyst, the reaction will finish faster.” (b) Matter is neither created nor destroyed in a chemical reaction. (c) All matter is made of atoms that combine in whole-number ratios.

  1. (a) A testable prediction made before an experiment is a hypothesis.
    It can be supported or rejected by collecting data, which is what defines a hypothesis.
  2. (b) A statement that describes what always happens in reactions is a law (conservation of mass).
    Laws describe a pattern in nature, often with measurements, but they do not explain why it happens.
  3. (c) A broad explanation of why substances behave as they do is a theory (atomic theory).
    Theories explain many observations and have survived many tests.
  4. A theory does not become a law when it is proven.
    They are different kinds of knowledge: laws describe and theories explain, so both stay in science.

Strategy: Describe or explain, test or accept

Check your understanding

  1. A testable prediction made before an experiment is a…

    1. Fact
    2. Theory
    3. Law
    4. Hypothesis
    Show the answer

    Answer: D. Hypothesis

    It is a hypothesis.

  2. The law of conservation of mass says…

    1. Mass becomes energy always
    2. Mass increases
    3. Mass is conserved in a chemical reaction
    4. Atoms are destroyed
    Show the answer

    Answer: C. Mass is conserved in a chemical reaction

    Total mass stays constant.

  3. Which explains why matter behaves as it does?

    1. A law
    2. A theory
    3. An observation
    4. A hypothesis
    Show the answer

    Answer: B. A theory

    Theories explain.

Practice this lesson with interactive questions