Chemistry Unit 6: Chemical Reactions
This Chemistry unit, Chemical Reactions, has 4 lessons that cover TEKS C.9A, C.9B, C.9C, C.9D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- C.9A Interpret, write and balance equations for common reaction types applying conservation of mass
- C.9B Differentiate among acid-base, precipitation and oxidation-reduction reactions
- C.9C Perform stoichiometric calculations including mass, gas volume and percent yield
- C.9D Describe the concept of limiting reactants
Lesson 1: Balancing equations
TEKS C.9A
What you will learn
I can write and balance chemical equations to show that mass is conserved in a reaction.
I can count atoms on each side and change coefficients (never subscripts).
Key vocabulary
- coefficient
- The number in front of a formula that tells how many units of that substance take part in a reaction.
Examples: The 2 in 2H₂O; The 3 in 3O₂ - reactant
- A substance that is present at the start of a reaction and is changed by it.
Examples: H₂ and O₂ in making water; Methane and oxygen in burning - law of conservation of mass
- In a chemical reaction, atoms are rearranged but not created or destroyed, so total mass stays the same.
Examples: 4 H on each side; 2 O on each side
Worked example
Balance: H₂ + O₂ → H₂O.
- Count atoms: left has 2 H and 2 O; right has 2 H and 1 O.
Counting each element on both sides shows exactly which one is out of balance. - Oxygen is unbalanced. Put a 2 in front of H₂O: H₂ + O₂ → 2H₂O.
Changing a coefficient changes the number of molecules without changing what the substance is. - Now hydrogen is unbalanced (2 on the left, 4 on the right). Put a 2 in front of H₂: 2H₂ + O₂ → 2H₂O.
Fixing one element often upsets another, so go back and recount. - Check: 4 H and 2 O on each side.
Equal counts for every element prove that mass is conserved.
Strategy: Count, change one coefficient, recount
- List atoms on each side.
- Balance the most complex element first.
- Leave single elements like O₂ for last.
- Recount everything.
Check your understanding
Which is balanced?
- 2H₂ + 2O₂ → 2H₂O
- H₂ + O₂ → 2H₂O
- H₂ + O₂ → H₂O
- 2H₂ + O₂ → 2H₂O
Show the answer
Answer: D. 2H₂ + O₂ → 2H₂O
Both sides have 4 H and 2 O.
When balancing, you may change…
- The arrow
- The elements
- Subscripts
- Coefficients
Show the answer
Answer: D. Coefficients
Never change subscripts.
The law of conservation of mass says…
- Mass doubles
- Mass is lost
- Atoms are not created or destroyed
- Atoms vanish
Show the answer
Answer: C. Atoms are not created or destroyed
Atoms are rearranged only.
Lesson 2: Types of reactions
TEKS C.9B
What you will learn
I can identify and write common reaction types, and tell acid-base, precipitation and oxidation-reduction (redox) reactions apart.
I can name a reaction as synthesis, decomposition, single or double replacement, or combustion and spot electron transfer.
Key vocabulary
- precipitation reaction
- A reaction in which two solutions combine and form an insoluble solid called a precipitate.
Examples: AgNO₃ + NaCl making AgCl; Pb(NO₃)₂ + KI making PbI₂ - oxidation-reduction (redox)
- A reaction in which electrons are transferred: one substance loses electrons (oxidation) and another gains them (reduction).
Examples: Zn + Cu²⁺ → Zn²⁺ + Cu; Rusting of iron - neutralization
- An acid-base reaction in which an acid and a base react to form water and a salt.
Examples: HCl + NaOH → NaCl + H₂O; Antacid and stomach acid
Worked example
Classify each: (a) 2Mg + O₂ → 2MgO, (b) 2H₂O → 2H₂ + O₂, (c) Zn + 2HCl → ZnCl₂ + H₂, (d) AgNO₃ + NaCl → AgCl + NaNO₃.
- (a) Two substances form one: synthesis.
A single product from multiple reactants is the signature of synthesis. - (b) One substance breaks into two: decomposition.
A single reactant producing several products signals decomposition. - (c) Zinc replaces hydrogen: single replacement.
One element swaps places with an element in a compound. - (d) Two compounds swap partners: double replacement, and AgCl is a solid, so it is a precipitation reaction.
Switching ion partners is double replacement, and the solid product is what makes it a precipitation reaction.
Strategy: Count reactants and products, check for electrons, solids and water
- One product? Synthesis.
- One reactant? Decomposition.
- Do charges change? Redox.
- Solid or water forms? Precipitation or neutralization.
Check your understanding
2Na + Cl₂ → 2NaCl is…
- Double replacement
- Combustion
- Decomposition
- Synthesis
Show the answer
Answer: D. Synthesis
Two reactants make one product.
Which reaction forms a solid?
- Combustion
- Decomposition
- Neutralization
- Precipitation
Show the answer
Answer: D. Precipitation
A precipitate is a solid.
In redox, a substance that loses electrons is…
- Reduced
- Oxidized
- Dissolved
- Neutralized
Show the answer
Answer: B. Oxidized
Oxidation is loss of electrons.
Lesson 3: Stoichiometry and percent yield
TEKS C.9C
What you will learn
I can use balanced equations to calculate masses of reactants and products, gas volumes at standard conditions, and percent yield.
I can use the mole ratio from the coefficients as the bridge between substances.
Key vocabulary
- stoichiometry
- The calculation of amounts of reactants and products in a chemical reaction using a balanced equation.
Examples: How much CO₂ from burning propane; How much iron from iron ore - mole ratio
- The ratio of the coefficients of two substances in a balanced equation.
Examples: 2 mol H₂ : 1 mol O₂; 1 mol C₃H₈ : 3 mol CO₂ - percent yield
- The actual yield divided by the theoretical yield, times 100.
Examples: 9.0 g obtained of 10.0 g possible is 90%; Loss from spills
Worked example
How many grams of water form when 4.00 g of hydrogen burn? 2H₂ + O₂ → 2H₂O (H₂ 2.02 g/mol, H₂O 18.02 g/mol)
- Convert grams of H₂ to moles: 4.00 g ÷ 2.02 g/mol = 1.98 mol.
Equations compare moles, not grams, so convert first. - Use the mole ratio 2 mol H₂O / 2 mol H₂ = 1: 1.98 mol H₂O.
The coefficients show that every H₂ makes one H₂O, so the moles are equal. - Convert moles of H₂O to grams: 1.98 mol × 18.02 g/mol = 35.7 g.
The molar mass converts the moles to a mass that can be weighed in the lab. - Check: hydrogen is 11% of water by mass, and 4.0 ÷ 0.11 ≈ 36.
Comparing with percent composition confirms the answer without redoing the work.
Strategy: Grams → moles → ratio → moles → grams
- Balance the equation.
- Convert the given to moles.
- Use the mole ratio.
- Convert to the wanted unit.
Check your understanding
In stoichiometry, the first step is usually to convert the given to…
- Percent
- Atoms
- Liters
- Moles
Show the answer
Answer: D. Moles
Moles link substances.
The mole ratio comes from the…
- Molar masses
- Subscripts
- Coefficients of the balanced equation
- Densities
Show the answer
Answer: C. Coefficients of the balanced equation
Coefficients give the ratio.
At STP, one mole of gas has a volume of…
- 1 L
- 22.4 L
- 100 L
- 24.0 L
Show the answer
Answer: B. 22.4 L
22.4 L.
Lesson 4: Limiting reactants
TEKS C.9D
What you will learn
I can describe limiting and excess reactants and use them to decide how much product forms.
I can compare how much product each reactant could make and pick the smaller.
Key vocabulary
- limiting reactant
- The reactant that is used up first and so limits the amount of product that can form.
Examples: The bread slices in making sandwiches; The oxygen in a closed flame - excess reactant
- A reactant that is left over after the reaction stops because the limiting reactant is gone.
Examples: Extra cheese slices; Leftover H₂ in a reaction - theoretical yield
- The maximum amount of product that can form from the limiting reactant.
Examples: The 25.0 g predicted; The result of the stoichiometry
Worked example
A sandwich needs 2 slices of bread and 1 slice of cheese. With 10 slices of bread and 8 slices of cheese, how many sandwiches can you make and what is left over?
- Bread allows 10 ÷ 2 = 5 sandwiches.
The recipe ratio decides how many sandwiches each ingredient could support. - Cheese allows 8 ÷ 1 = 8 sandwiches.
Check each ingredient separately, because either may be the one that runs out. - The bread is limiting, so only 5 sandwiches are possible.
The smaller number sets the limit, since you cannot make a sandwich without bread. - 5 slices of cheese are used and 3 are left over (excess).
The ingredient that does not run out is the excess, just as in a chemical reaction.
Strategy: Moles of each, compare, smallest wins
- Convert each reactant to moles.
- Find how much product each could make.
- Pick the smaller amount.
- Find the leftover.
Check your understanding
The limiting reactant…
- Is a product
- Is a catalyst
- Is left over
- Is used up first
Show the answer
Answer: D. Is used up first
It limits the product.
The excess reactant…
- Is the product
- Runs out first
- Is left over
- Is the limiting reactant
Show the answer
Answer: C. Is left over
Some remains.
To find the limiting reactant, compare…
- Only masses
- Moles using the mole ratio
- Names
- Only volumes
Show the answer
Answer: B. Moles using the mole ratio
Use moles and the ratio.