Texas Test Academy

Take learning by the horns.

Environmental Systems Unit 1: Thinking and Working Like an Environmental Scientist

This Environmental Systems unit, Thinking and Working Like an Environmental Scientist, has 3 lessons that cover TEKS E.1A, E.1B, E.1C, E.1D, E.1E, E.1F, E.1G, E.2A and more. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Safety, field tools, data and models

TEKS E.1A E.1B E.1C E.1D E.1E E.1F E.1G

What you will learn

I can plan a safe field or lab investigation, choose tools such as water test kits, probes and mapping software, collect SI and qualitative data, and organize them in tables, graphs and models.

I can design a sampling plan and name the independent, dependent and controlled variables.

Key vocabulary

sample
A small part of an environment that is measured or collected to represent the whole.
Examples: Water from a creek at three sites; Soil cores from a field
quadrat
A square frame of known area placed on the ground to count organisms in a small sample area.
Examples: A 1 m² frame for counting wildflowers; Sampling a lawn
GIS
Geographic information system: software that layers data on maps to show patterns of places and conditions.
Examples: A map of where wells are located; Tracking land cover change

Worked example

A class wants to test whether a Texas creek is healthier upstream than downstream of a town. Design the investigation.

  1. Question: Does dissolved oxygen differ between sites upstream and downstream of the town?
    A testable question names the measured quantity and the places that are compared.
  2. Independent variable: site location. Dependent variable: dissolved oxygen (mg/L). Controlled: time of day, water temperature recorded, same test kit.
    Oxygen changes with temperature and time of day, so these must be recorded or kept the same.
  3. Sample three sites upstream and three downstream, with three readings at each.
    Several sites and repeat readings show whether differences are real or just a result of one odd spot.
  4. Record numbers in SI units (mg/L, °C) and qualitative notes on smell, color and trash.
    Notes can explain a surprising number, such as a nearby drain pipe.

Strategy: Question, sites, repeats, safety, data

Check your understanding

  1. Why take several samples?

    1. To make data bigger
    2. To change the variable
    3. To save time
    4. To reduce the effect of chance
    Show the answer

    Answer: D. To reduce the effect of chance

    Several samples are more reliable.

  2. A quadrat is used to…

    1. Take photographs
    2. Measure temperature
    3. Measure pH
    4. Count organisms in a known area
    Show the answer

    Answer: D. Count organisms in a known area

    It gives a count per area.

  3. Which is quantitative data?

    1. It smelled bad
    2. Water looked cloudy
    3. 7.5 mg/L oxygen
    4. The creek was pretty
    Show the answer

    Answer: C. 7.5 mg/L oxygen

    A measurement with units.

Practice this lesson with interactive questions

Lesson 2: Analyzing data, math and explanations

TEKS E.2A E.2B E.2C E.2D E.3A E.3B E.3C

What you will learn

I can analyze environmental data for patterns and error, calculate quantities such as rates and percent change, and evaluate models and designs.

I can find a percent change and read a time-series graph.

Key vocabulary

percent change
The change in a quantity divided by its original value, times 100.
Examples: A rise from 400 to 420 ppm is 5%; A fall from 50 to 40 fish is −20%
trend
The general direction in which data change over time, such as rising or falling.
Examples: CO₂ rising each year; Lake levels falling during a drought
model limitation
A way in which a model differs from the real system, such as leaving out variables or using a small scale.
Examples: A stream table with no vegetation; A climate model with no clouds

Worked example

A reservoir held 800 million m³ of water in 2018 and 560 million m³ in 2023. Find the percent change and describe the trend.

  1. Change = 560 − 800 = −240 million m³.
    A negative change means a decrease, which tells us the direction and size of the loss before any scaling.
  2. Percent change = (−240 ÷ 800) × 100 = −30%.
    Dividing by the original value puts the change in proportion to where it started.
  3. The reservoir lost 30% of its volume in five years, or about 6% per year on average.
    Dividing by the number of years gives an average rate that can be compared.
  4. A trend over time is stronger evidence than a single year.
    One dry year might be an outlier, but five years shows a pattern.

Strategy: Subtract, divide by the original, check outliers

Check your understanding

  1. Percent change from 50 to 40 is…

    1. −25%
    2. +20%
    3. −10%
    4. −20%
    Show the answer

    Answer: D. −20%

    (40−50)/50 = −20%.

  2. An outlier is…

    1. A graph
    2. A trend
    3. The mean
    4. A value far from the others
    Show the answer

    Answer: D. A value far from the others

    It is unusual.

  3. A trend shows…

    1. One value
    2. The direction of change over time
    3. A title
    4. An error
    Show the answer

    Answer: B. The direction of change over time

    Direction over time.

Practice this lesson with interactive questions

Lesson 3: Hypotheses, theories, laws and scientists

TEKS E.1H E.4A E.4B E.4C

What you will learn

I can distinguish hypotheses, theories and laws, critique environmental claims with evidence, and relate research to society and STEM careers.

I can separate correlation from cause and name careers that protect the environment.

Key vocabulary

correlation
A relationship in which two variables change together; it does not prove that one causes the other.
Examples: Ice cream sales and drownings both rise in summer; CO₂ and temperature
environmental scientist
A scientist who studies the environment and the effects of human activity and finds solutions to problems.
Examples: A water quality specialist; A wildlife biologist
cost-benefit analysis
A way of comparing the costs of an action with its benefits to decide whether it is worthwhile.
Examples: A dam brings power but floods habitat; Cleaning up a spill

Worked example

Classify: (a) the law of conservation of mass, (b) “If fertilizer runoff increases, algae will grow faster,” (c) the theory of plate tectonics.

  1. (a) A statement that describes what always happens is a law, even for pollutants in a closed system.
    It says that matter is neither created nor destroyed, so waste does not disappear, it moves.
  2. (b) A testable prediction is a hypothesis.
    It can be checked by measuring algae in water with different fertilizer levels.
  3. (c) Plate tectonics explains why continents move and earthquakes occur, so it is a theory.
    It explains many observations and predicts new ones, such as where volcanoes will form.
  4. A theory does not become a law.
    They answer different questions, so both are needed in science.

Strategy: Describe, explain, test, then weigh

Check your understanding

  1. A testable prediction is a…

    1. Opinion
    2. Theory
    3. Law
    4. Hypothesis
    Show the answer

    Answer: D. Hypothesis

    A hypothesis.

  2. Correlation means…

    1. They are the same
    2. One causes the other
    3. Two things change together
    4. No data
    Show the answer

    Answer: C. Two things change together

    It does not prove a cause.

  3. Cost-benefit analysis compares…

    1. Colors
    2. Costs and benefits
    3. Dates
    4. Names
    Show the answer

    Answer: B. Costs and benefits

    It weighs costs against benefits.

Practice this lesson with interactive questions