Texas Test Academy

Take learning by the horns.

Environmental Systems Unit 7: Emissions and Pollutants

This Environmental Systems unit, Emissions and Pollutants, has 4 lessons that cover TEKS E.10A, E.10B, E.10C, E.10D, E.10E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Emission sources and when emissions become pollutants

TEKS E.10A E.10B

What you will learn

I can identify emission sources in air, soil and water, including point and nonpoint sources, and tell when an emission becomes a pollutant.

I can sort point and nonpoint sources and decide when an emission is a pollutant.

Key vocabulary

point source
A single, identifiable place where pollution enters the environment, such as a pipe or smokestack.
Examples: A factory discharge pipe; A smokestack
nonpoint source
Pollution that comes from many scattered places and cannot be traced to one spot.
Examples: Fertilizer runoff from farms; Oil washed off roads
pollutant
A substance that is harmful because of its concentration, toxicity, reactivity or location.
Examples: Excess nitrate in drinking water; Ozone at ground level

Worked example

Classify as point or nonpoint: (a) a wastewater plant’s outfall pipe, (b) lawn fertilizer washing into storm drains, (c) a coal power plant’s smokestack, (d) oil dripping from cars on roads.

  1. (a) Point: it is a single pipe in one place.
    Regulators can measure and limit what comes out of that one pipe.
  2. (b) Nonpoint: many yards contribute small amounts.
    There is no single source to blame or fix, so no single yard can be blamed and the whole watershed must change habits together.
  3. (c) Point: the stack is one clear location.
    Monitors can be installed on a stack to track emissions.
  4. (d) Nonpoint: thousands of cars spread small drips everywhere.
    It is controlled through rules for everyone, such as street sweeping and rain gardens.

Strategy: Where from? How much? Where?

Check your understanding

  1. A point source is…

    1. Rain
    2. The sky
    3. Many places
    4. One identifiable place
    Show the answer

    Answer: D. One identifiable place

    One place.

  2. Fertilizer runoff is…

    1. A stack
    2. Natural only
    3. Point
    4. Nonpoint
    Show the answer

    Answer: D. Nonpoint

    Nonpoint.

  3. A pollutant is harmful because of…

    1. Name only
    2. Color only
    3. Concentration, toxicity, reactivity or location
    4. Size only
    Show the answer

    Answer: C. Concentration, toxicity, reactivity or location

    Several factors.

Practice this lesson with interactive questions

Lesson 2: Effects of pollutants

TEKS E.10C

What you will learn

I can investigate effects of pollutants such as CFCs, greenhouse gases, pesticide runoff, nuclear waste, aerosols, heavy metals, and thermal, light and noise pollution.

I can match a pollutant to its effect on organisms and ecosystems.

Key vocabulary

bioaccumulation
The buildup of a substance in an organism’s body faster than it can be removed.
Examples: Mercury in fish; DDT in birds
biomagnification
The increasing concentration of a substance at each higher level of a food chain.
Examples: Mercury in tuna; DDT in eagles
thermal pollution
Harmful warming of a water body, often by hot water released from power plants and factories.
Examples: Cooling water from a plant; Warm runoff from pavement

Worked example

DDT sprayed on crops washed into lakes. Show how its concentration changes up the food chain from plankton to fish to eagles, and what happened to eagles.

  1. Plankton absorb a tiny amount, such as 0.04 ppm.
    DDT breaks down very slowly, so it stays in living tissue.
  2. Small fish eat lots of plankton, so their tissue reaches about 0.5 ppm.
    Each fish eats many contaminated organisms, so the amount adds up.
  3. Large fish eat many small fish, and eagles eat large fish, reaching 25 ppm or more.
    Predators at the top accumulate the most, which is biomagnification.
  4. DDT thinned eggshells, so the eggs broke and eagle populations crashed until DDT was banned in 1972.
    The ban allowed bald eagles to recover, which shows that regulation can work.

Strategy: Source, pathway, target

Check your understanding

  1. Biomagnification means…

    1. Spreads in air
    2. No change
    3. Concentration falls
    4. Concentration rises up the food chain
    Show the answer

    Answer: D. Concentration rises up the food chain

    It rises.

  2. CFCs damage…

    1. Mountains
    2. Oceans only
    3. Soil
    4. The ozone layer
    Show the answer

    Answer: D. The ozone layer

    Ozone.

  3. Thermal pollution lowers…

    1. Temperature
    2. Dissolved oxygen
    3. Light
    4. Salt
    Show the answer

    Answer: B. Dissolved oxygen

    Oxygen.

Practice this lesson with interactive questions

Lesson 3: Quality indicators and regulatory standards

TEKS E.10D

What you will learn

I can evaluate air, soil and water quality indicators against regulatory standards to judge ecosystem health.

I can compare a measurement with a standard and decide if it passes.

Key vocabulary

water quality standard
A legal limit for the amount of a substance allowed in water for a given use, such as drinking.
Examples: 10 mg/L nitrate-N; 4 mg/L lead action level rule
air quality index (AQI)
A scale from 0 to 500 that tells how clean or polluted the air is and what health effects to expect.
Examples: AQI 45 is good; AQI 160 is unhealthy
bioindicator
An organism whose presence, absence or health shows the condition of an ecosystem.
Examples: Mayfly nymphs in a clean stream; Lichens in clean air

Worked example

A town’s air monitor reads PM2.5 of 38 µg/m³ for the day. The EPA 24-hour standard is 35 µg/m³. Evaluate the reading.

  1. 38 is greater than 35, so the day exceeds the standard.
    A reading above the legal limit means the air is not considered safe for everyone.
  2. The excess is 3 µg/m³, about 9% above the limit.
    Calculating how far above shows the size of the problem, not just that it fails.
  3. PM2.5 is fine particles that reach deep into the lungs.
    They are linked with asthma, heart disease and early death, so the limit is strict.
  4. Sensitive groups such as children and elderly should limit time outdoors.
    Health advisories protect those who are affected at lower levels.

Strategy: Measure, compare, decide

Check your understanding

  1. A standard is…

    1. A color
    2. A hobby
    3. A guess
    4. A legal limit
    Show the answer

    Answer: D. A legal limit

    A limit.

  2. A bioindicator is…

    1. A chemical
    2. A machine
    3. An organism showing conditions
    4. A law
    Show the answer

    Answer: C. An organism showing conditions

    Living gauge.

  3. Mayflies show…

    1. Polluted water
    2. Clean water
    3. No water
    4. Salt water
    Show the answer

    Answer: B. Clean water

    Clean water.

Practice this lesson with interactive questions

Lesson 4: Global warming and ozone depletion

TEKS E.10E

What you will learn

I can distinguish causes and effects of global warming and ozone depletion, including chemicals, atmospheric layer, health effects and IR and UV wavelengths.

I can tell greenhouse warming from ozone depletion by layer, chemical and wavelength.

Key vocabulary

greenhouse effect
The trapping of infrared heat in the lower atmosphere by gases such as CO₂ and methane.
Examples: CO₂ and CH₄ warming; A warm greenhouse
ozone depletion
The thinning of the stratospheric ozone layer by chlorine and bromine from CFCs and similar chemicals.
Examples: The Antarctic ozone hole; CFCs
ultraviolet (UV) radiation
Light with a shorter wavelength than visible light that can damage skin and DNA.
Examples: Sunburn; Skin cancer

Worked example

Compare global warming and ozone depletion by layer of the atmosphere, chemicals and type of radiation.

  1. Global warming happens mainly in the troposphere, the lowest layer, where we live.
    Greenhouse gases there trap heat near the surface, and that is why heat-trapping gases there change the weather and climate we experience.
  2. Ozone depletion happens in the stratosphere, 15 to 35 km up.
    The ozone layer is located there and absorbs UV before it reaches us.
  3. Warming involves infrared (IR) radiation re-emitted by Earth, trapped by CO₂, CH₄ and N₂O.
    IR has a longer wavelength than visible light and carries heat.
  4. Ozone loss involves UV radiation passing through to the surface because chlorine from CFCs destroyed ozone.
    UV has a shorter wavelength and more energy per photon.

Strategy: Layer, chemical, light

Check your understanding

  1. Ozone layer is in the…

    1. Ocean
    2. Ground
    3. Troposphere
    4. Stratosphere
    Show the answer

    Answer: D. Stratosphere

    Stratosphere.

  2. Greenhouse gases trap…

    1. Sound
    2. UV
    3. Infrared
    4. Gamma
    Show the answer

    Answer: C. Infrared

    Infrared.

  3. CFCs destroy…

    1. Oxygen only
    2. Ozone
    3. Carbon
    4. Water
    Show the answer

    Answer: B. Ozone

    Ozone.

Practice this lesson with interactive questions