Texas Test Academy

Take learning by the horns.

Physics Unit 7: Quantum Phenomena

This Physics unit, Quantum Phenomena, has 3 lessons that cover TEKS P.9A, P.9B, P.9C, P.9D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: The photoelectric effect

TEKS P.9A

What you will learn

I can describe the photoelectric effect and emission spectra using the photon model of light.

I can use E = hf and KE_max = hf − φ to predict whether electrons are emitted.

Key vocabulary

photoelectric effect
The emission of electrons from a metal surface when light of high enough frequency shines on it.
Examples: Solar cells; Light sensors
work function (φ)
The minimum energy needed to remove an electron from the surface of a metal.
Examples: 2.3 eV for sodium; 4.7 eV for copper
photon
A packet of light energy E = hf, which behaves like a particle that is absorbed all at once.
Examples: A violet photon has more energy than a red one; Light emitted in an atom’s transition

Worked example

Sodium’s work function is 2.3 eV. Light of wavelength 400 nm shines on it. Will electrons be emitted, and with what maximum kinetic energy? (hc = 1240 eV·nm)

  1. Photon energy: E = hc/λ = 1240 ÷ 400 = 3.1 eV.
    Each photon carries a fixed amount of energy determined by its wavelength.
  2. Compare with the work function: 3.1 eV > 2.3 eV, so electrons are emitted.
    An electron absorbs one photon, so the photon must have more energy than the work function.
  3. KE_max = E − φ = 3.1 − 2.3 = 0.8 eV.
    Energy left over after freeing the electron becomes its kinetic energy.
  4. A brighter beam would eject more electrons, but each with the same maximum energy.
    Intensity changes the number of photons, but not the energy of each photon.

Strategy: Photon energy against the threshold

Check your understanding

  1. The energy of a photon is…

    1. E = λ
    2. E = f/h
    3. E = mc
    4. E = hf
    Show the answer

    Answer: D. E = hf

    E = hf.

  2. If photon energy is below the work function…

    1. Charge is created
    2. The metal melts
    3. Electrons are emitted
    4. No electrons are emitted
    Show the answer

    Answer: D. No electrons are emitted

    No emission.

  3. Increasing intensity of light above threshold…

    1. Stops emission
    2. Increases their max energy
    3. Increases the number of electrons
    4. Changes the work function
    Show the answer

    Answer: C. Increases the number of electrons

    More electrons, same max energy.

Practice this lesson with interactive questions

Lesson 2: Polarization and Malus’s law

TEKS P.9B

What you will learn

I can investigate Malus’s law and describe applications of polarization.

I can use I = I₀cos²θ to find the light that passes through polarizers.

Key vocabulary

polarization
The orientation of the oscillation of a transverse wave; polarized light vibrates in a single plane.
Examples: Light from a polarizing filter; Reflected glare
polarizing filter
A material that only lets through light that vibrates in one direction.
Examples: Sunglasses; Camera filter
Malus’s law
The intensity of polarized light after passing a second polarizer is I = I₀cos²θ, where θ is the angle between the polarization directions.
Examples: 90° blocks all; 0° passes all

Worked example

Unpolarized light of intensity 100 W/m² passes through one polarizer. What is the intensity afterward?

  1. Unpolarized light vibrates in all directions equally.
    A polarizer passes only the component along its axis.
  2. On average, half of the intensity passes.
    The cos²θ average over all angles is 1/2 because the average value of cos²θ over all directions is one half.
  3. I = 100 ÷ 2 = 50 W/m².
    The result is fully polarized along the filter’s axis.
  4. This is why polarized sunglasses are darker than clear ones.
    They remove half of the light even before blocking glare.

Strategy: Half through the first, then cos² of the angle

Check your understanding

  1. Malus’s law is…

    1. I = I₀ + θ
    2. I = I₀/θ
    3. I = I₀sinθ
    4. I = I₀cos²θ
    Show the answer

    Answer: D. I = I₀cos²θ

    I = I₀cos²θ.

  2. Crossed polarizers (90°) transmit…

    1. Double
    2. Half the light
    3. All light
    4. No light
    Show the answer

    Answer: D. No light

    None.

  3. Unpolarized light through one polarizer loses…

    1. All
    2. Half its intensity
    3. A quarter
    4. None
    Show the answer

    Answer: B. Half its intensity

    Half.

Practice this lesson with interactive questions

Lesson 3: Superposition, duality and quantum applications

TEKS P.9C P.9D

What you will learn

I can compare and explain how quantum state superposition relates to the wave-particle duality of light, and give examples of quantum applications.

I can describe the double-slit experiment with single photons and name uses such as quantum computing and cryptography.

Key vocabulary

wave-particle duality
The idea that light and matter show both wave-like and particle-like behavior, depending on the experiment.
Examples: Interference of light; Photoelectric effect
superposition
A quantum state that is a combination of two or more possible states until it is measured.
Examples: A photon passing through two slits; A qubit in 0 and 1
uncertainty principle
It is impossible to know exactly both the position and the momentum of a particle at the same time.
Examples: Electrons in atoms cannot have exact orbits; Limit of measurement

Worked example

In a double-slit experiment, photons are sent one at a time. After many photons, an interference pattern builds on the screen. What does this show?

  1. Each photon hits the screen at a single point, like a particle.
    The detector records a single dot for each photon so each photon arrives as one indivisible packet.
  2. Many photons together form bright and dark bands.
    The pattern is the signature of waves interfering and only waves that overlap can make such a pattern.
  3. Each photon behaves as though it goes through both slits and interferes with itself.
    The photon’s state is a superposition of passing through each slit.
  4. Conclusion: light shows both wave and particle properties (duality).
    If a detector tells which slit each photon uses, the interference pattern disappears, so measurement matters.

Strategy: Wave when spreading, particle when detected

Check your understanding

  1. The double-slit pattern of single photons shows…

    1. Neither
    2. Only wave behavior
    3. Only particle behavior
    4. Wave and particle behavior
    Show the answer

    Answer: D. Wave and particle behavior

    Both behaviors.

  2. A qubit can be…

    1. Only 1
    2. Only 0
    3. In a superposition of 0 and 1
    4. Neither
    Show the answer

    Answer: C. In a superposition of 0 and 1

    A superposition.

  3. The uncertainty principle limits knowing…

    1. Mass and charge
    2. Position and momentum together
    3. Time and date
    4. Color and size
    Show the answer

    Answer: B. Position and momentum together

    Position and momentum.

Practice this lesson with interactive questions