Precalculus Unit 6: Angles, the Unit Circle and Triangles
This Precalculus unit, Angles, the Unit Circle and Triangles, has 4 lessons that cover TEKS PC.4B, PC.4C, PC.4A, PC.2P, PC.4D, PC.4E, PC.4F. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- PC.4B relate degree and radian measure on the unit circle
- PC.4C represent angles in radians or degrees, find reference angles and work with angles in standard position
- PC.4A use the unit circle and periodic functions to evaluate trigonometric functions
- PC.2P determine trigonometric function values at special angles and apply them to problems
- PC.4D apply rotational angle measures to problems, including linear and angular velocity
- PC.4E determine trigonometric ratio values and solve related problems
- PC.4F apply trigonometry to problems, including directional bearings
Lesson 1: Degrees, radians and reference angles
TEKS PC.4B PC.4C
What you will learn
I can convert between degrees and radians, work with angles in standard position, and find reference angles.
A full turn is 360° = 2π radians, so 180° = π. Degrees to radians: multiply by π/180. Radians to degrees: multiply by 180/π. The reference angle is the acute angle between the terminal side and the x-axis.
Key vocabulary
- radian
- An angle measure equal to the arc length divided by the radius; π radians = 180°.
Examples: π/2 = 90°; 5π/6 = 150° - standard position
- An angle with its vertex at the origin and initial side on the positive x-axis; a positive angle turns counterclockwise.
Examples: 240° ends in Quadrant III; −90° turns clockwise - reference angle
- The acute angle formed between the terminal side of an angle and the x-axis.
Examples: 45° for 225°; π/6 for 11π/6
Worked example
Convert 150° to radians, and 7π/4 to degrees.
- 150° · π/180° = 150π/180 = 5π/6.
Multiplying by π/180 cancels the degree unit and leaves radians; simplify the fraction. - 7π/4 · 180°/π = 7 · 45° = 315°.
The π cancels, and 180 ÷ 4 = 45, so each π/4 is 45 degrees. - Check: 315° is 45° short of a full 360°, and 7π/4 is π/4 short of 2π ✓.
The same angle has a consistent distance from a full turn in both units.
Strategy: Convert, locate, reduce
- Convert units with π/180 or 180/π.
- Find the quadrant and a coterminal angle in [0, 2π).
- Subtract from π or 2π (or from π) to get the reference angle.
Check your understanding
π radians equals…
- 57.3°
- 360°
- 90°
- 180°
Show the answer
Answer: D. 180°
A half turn is π radians.
60° in radians is…
- π/4
- 2π/3
- π/6
- π/3
Show the answer
Answer: D. π/3
60/180 = 1/3.
3π/2 in degrees is…
- 135°
- 180°
- 270°
- 360°
Show the answer
Answer: C. 270°
3π/2 · 180/π = 270°.
Lesson 2: The unit circle and special angles
TEKS PC.4A PC.2P
What you will learn
I can use the unit circle and special angles to evaluate trigonometric functions and apply them to problems.
On the unit circle, the point at angle θ is (cos θ, sin θ). Use the reference angle (30°, 45°, 60°) and the quadrant sign. Key values: sin 30° = ½, sin 45° = √2/2, sin 60° = √3/2 (and cos in reverse order).
Key vocabulary
- unit circle
- The circle of radius 1 centered at the origin; the point at angle θ is (cos θ, sin θ).
Examples: (½, √3/2) at 60°; (−√3/2, ½) at 150° - special angle
- An angle such as 30°, 45° or 60° (and its multiples) whose trig values can be written exactly.
Examples: sin 45° = √2/2; cos 60° = ½ - quadrant sign
- The sign of sin, cos and tan depends on the quadrant: all positive in I, sin in II, tan in III, cos in IV.
Examples: cos 150° < 0; sin 210° < 0
Worked example
Find sin 60°, cos 60° and tan 60°.
- The unit circle point at 60° is (½, √3/2).
The special angle triangle 30-60-90 with hypotenuse 1 has legs ½ and √3/2. - cos 60° = ½ and sin 60° = √3/2.
The x-coordinate is the cosine and the y-coordinate is the sine. - tan 60° = sin/cos = (√3/2)/(½) = √3.
The tangent is the ratio of the y-coordinate to the x-coordinate.
Strategy: Reference angle plus sign
- Find the reference angle and the quadrant.
- Use the special-angle value for the reference angle.
- Attach the sign from the quadrant.
Check your understanding
sin 30° =
- 1
- √2/2
- √3/2
- 1/2
Show the answer
Answer: D. 1/2
sin 30° = ½.
cos 45° =
- 1
- √3/2
- 1/2
- √2/2
Show the answer
Answer: D. √2/2
cos 45° = sin 45° = √2/2.
sin 210° =
- 1/2
- −1/2
- −√3/2
- √3/2
Show the answer
Answer: B. −1/2
sin 30° = ½ with a negative sign.
Lesson 3: Angular and linear velocity
TEKS PC.4D
What you will learn
I can apply angle measures to rotation problems, including angular velocity and linear velocity.
Angular velocity ω is the angle turned per unit time (ω = θ/t, with 1 rev = 2π rad). Linear velocity is the speed along the circle: v = rω. Arc length is s = rθ with θ in radians.
Key vocabulary
- angular velocity
- The rate at which an angle is swept out: ω = θ/t, usually in radians per unit time.
Examples: 10π rad/s for 5 rev/s; π/12 rad/h for Earth - linear velocity
- The speed of a point moving along a circle: v = rω.
Examples: 120π in/s on a 12 in wheel; 1036 mph at Earth’s equator - arc length
- The distance along a circle: s = rθ, with θ in radians.
Examples: s = 6 · π/3 = 2π; A quarter turn on radius 4 is 2π
Worked example
A wheel of radius 12 inches spins at 5 revolutions per second. Find ω and v.
- One revolution is 2π radians, so ω = 5 · 2π = 10π rad/s.
Convert revolutions to radians before using v = rω. - v = rω = 12 · 10π = 120π in/s.
The rim moves a distance of r times the angle each second. - v ≈ 377 in/s ≈ 31.4 ft/s. Check: the circumference is 24π ≈ 75.4 in and 5 turns is 377 in ✓.
Distance in 1 s equals circumference times revolutions.
Strategy: Radians first
- Convert the turning rate to radians per unit time.
- Use v = rω (keep units consistent).
- Convert back to rpm or mph if needed.
Check your understanding
1 revolution equals…
- 1 radian
- 360 radians
- π radians
- 2π radians
Show the answer
Answer: D. 2π radians
A full turn is 2π radians.
v = rω for r = 5 and ω = 3 rad/s is…
- 1.67
- 8
- 15
- 30
Show the answer
Answer: C. 15
v = 15 units per second.
ω for 10 rev/min in rad/min is…
- 10π
- 20π
- 5π
- 10
Show the answer
Answer: B. 20π
10 · 2π = 20π.
Lesson 4: Trigonometric ratios and bearings
TEKS PC.4E PC.4F
What you will learn
I can determine trigonometric ratios and use them to solve right-triangle problems, including directional bearings.
SOH-CAH-TOA: sin = opposite/hypotenuse, cos = adjacent/hypotenuse, tan = opposite/adjacent. A bearing such as N 60° E means start facing north and turn 60° toward east; the east part is d sin 60° and the north part is d cos 60°.
Key vocabulary
- trigonometric ratio
- A ratio of two sides of a right triangle: sin, cos or tan of an acute angle.
Examples: sin A = 5/13; tan A = 5/12 - angle of elevation
- The angle above the horizontal when looking up at an object.
Examples: A ladder at 70° to the ground; Looking up at a kite - bearing
- A direction given as an angle from north or south toward east or west, such as N 60° E.
Examples: N 60° E; S 30° W
Worked example
A right triangle has legs 5 and 12 and hypotenuse 13. Find sin A, cos A and tan A for the angle opposite the side 5.
- The side opposite A is 5, the adjacent side is 12 and the hypotenuse is 13.
Naming the sides relative to the angle comes first. - sin A = 5/13 and cos A = 12/13.
Sine uses opposite over hypotenuse and cosine uses adjacent over hypotenuse. - tan A = 5/12, and A ≈ 22.6°. Check: (5/13)² + (12/13)² = 25/169 + 144/169 = 1 ✓.
The Pythagorean identity confirms the ratios.
Strategy: Label, choose, solve
- Draw the triangle and label opposite, adjacent and hypotenuse for the angle.
- Choose sin, cos or tan to link the known and unknown sides.
- Solve and check with the Pythagorean theorem.
Check your understanding
sin A = opposite / …
- Angle
- Opposite
- Adjacent
- Hypotenuse
Show the answer
Answer: D. Hypotenuse
sin = opposite/hypotenuse.
In a right triangle with opposite 3 and adjacent 4, tan A =
- 3/5
- 4/3
- 3/4
- 4/5
Show the answer
Answer: C. 3/4
tan = 3/4.
A ladder 10 ft long makes 60° with the ground. Height =
- 10 cos 60° = 5 ft
- 10 sin 60° ≈ 8.7 ft
- 10/sin 60°
- 10 tan 60°
Show the answer
Answer: B. 10 sin 60° ≈ 8.7 ft
10(√3/2) ≈ 8.66.