Grade 8 Science Unit 2: Matter and Chemical Change
This Grade 8 Science unit, Matter and Chemical Change, has 5 lessons that cover TEKS 8.6A, 8.6B, 8.6C, 8.6D, 8.6E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
STAAR connection: Grade 8 Science is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.
TEKS covered in this unit
- 8.6A Use models to classify matter as elements, compounds, homogeneous mixtures or heterogeneous mixtures
- 8.6B Use the periodic table to identify the atoms involved in chemical reactions
- 8.6C Describe cohesion, adhesion and surface tension in water and link them to everyday effects such as droplets, plant water transport and insects on water
- 8.6D Compare and contrast acids and bases, including their pH relative to water
- 8.6E Show that mass is conserved in chemical reactions by relating the rearrangement of atoms to chemical equations, including photosynthesis
Lesson 1: Elements, compounds and mixtures
TEKS 8.6A
What you will learn
I can use models to classify matter as elements, compounds, homogeneous mixtures or heterogeneous mixtures.
I can sort matter as an element, compound or mixture.
Key vocabulary
- element
- A pure substance made of only one kind of atom.
Examples: Oxygen (O₂); Iron (Fe) - compound
- A pure substance made of two or more elements chemically bonded in a fixed ratio.
Examples: Water (H₂O); Carbon dioxide (CO₂) - homogeneous mixture
- A mixture that looks the same throughout; also called a solution.
Examples: Salt dissolved in water; Air
Worked example
Classify oxygen gas (O₂), water (H₂O) and salt water. Use particle models to explain.
- Oxygen gas: every particle is two oxygen atoms bonded together, so only one kind of atom is present.
A substance with one kind of atom is an element, even when the atoms form pairs. - Water: each particle has two hydrogen atoms bonded to one oxygen atom, always in the same ratio.
Two kinds of atoms bonded in a fixed ratio make a compound, so water is not an element. - Salt water: separate water molecules and salt particles are spread evenly among each other.
Mixing particles without bonding them into new particles makes a mixture. - Salt water looks the same everywhere, so it is a homogeneous mixture.
Uniform appearance is the clue that the particles are evenly spread.
Strategy: One atom or more, bonded or mixed, uniform or not
- Count kinds of atoms.
- Are they bonded in a ratio?
- Are they just mixed?
- Is it uniform?
Check your understanding
Which is an element?
- Air
- Salt water
- Water
- Iron
Show the answer
Answer: D. Iron
Iron is made of only iron atoms.
Which is a compound?
- Air
- Sand and gravel
- Oxygen (O₂)
- Water (H₂O)
Show the answer
Answer: D. Water (H₂O)
Water has hydrogen and oxygen bonded together.
Which is a homogeneous mixture?
- Granite
- A pizza
- Sugar dissolved in water
- A salad
Show the answer
Answer: C. Sugar dissolved in water
A solution is a homogeneous mixture.
Lesson 2: The periodic table and atoms in reactions
TEKS 8.6B
What you will learn
I can use the periodic table to identify the atoms in a chemical reaction and read their properties.
I can read symbols, atomic numbers, groups and periods.
Key vocabulary
- atomic number
- The number of protons in an atom of an element.
Examples: Carbon: 6; Oxygen: 8 - group
- A vertical column of the periodic table whose elements have similar properties.
Examples: Group 1: soft, reactive metals; Group 18: noble gases - period
- A horizontal row of the periodic table.
Examples: Period 2: Li to Ne; Period 3: Na to Ar
Worked example
Methane burns with oxygen: CH₄ + 2O₂ → CO₂ + 2H₂O. Use the periodic table to identify the atoms involved in the reaction.
- List the symbols: C, H and O.
Symbols are shorthand, so reading them tells you which elements are present before and after the reaction. - Look them up: C is carbon (6), H is hydrogen (1) and O is oxygen (8).
The atomic number identifies each element by its number of protons, which cannot change in a chemical reaction. - Count the atoms of each element on each side: 1 C, 4 H and 4 O on both sides.
Seeing the same atoms on both sides shows the reaction rearranges atoms and does not create or destroy them. - The reaction involves only carbon, hydrogen and oxygen.
No new elements appear because chemical reactions cannot change one element into another.
Strategy: Symbol, number, group, period
- Read the symbol.
- Find the atomic number.
- Find the group and period.
- Predict the behavior.
Check your understanding
What does the atomic number tell you?
- The color
- The mass in grams
- The number of neutrons only
- The number of protons
Show the answer
Answer: D. The number of protons
Atomic number equals protons.
Elements in the same group have…
- No properties
- The same state
- The same mass
- Similar properties
Show the answer
Answer: D. Similar properties
Groups share properties.
Which group contains the noble gases?
- Group 1
- Group 18
- Group 12
- Group 7
Show the answer
Answer: B. Group 18
Noble gases are in group 18.
Lesson 3: Water: cohesion, adhesion and surface tension
TEKS 8.6C
What you will learn
I can describe cohesion, adhesion and surface tension in water and connect them to everyday effects.
I can explain cohesion, adhesion and surface tension using water molecules.
Key vocabulary
- cohesion
- The attraction between molecules of the same substance.
Examples: Water drops beading up; Water molecules sticking to each other - adhesion
- The attraction between molecules of different substances.
Examples: Water clinging to the side of a glass; Water moving up a plant stem - surface tension
- The tight “skin” on a liquid’s surface caused by cohesion.
Examples: A water strider standing on a pond; A paper clip floating on water
Worked example
A water strider walks on a pond without sinking. Explain using water’s properties.
- Water molecules are attracted to each other (cohesion).
Each molecule pulls on its neighbors, so the group acts as one connected material. - At the surface the molecules have no neighbors above, so they pull more strongly on the ones beside and below.
This stronger pull makes the surface behave like a stretched film. - The strider’s light body spreads its weight on long legs.
Spreading the weight across a large area puts less force on each spot, so the film does not break. - Conclusion: surface tension supports the insect.
If soap were added, cohesion would drop and the strider could sink, which can be tested.
Strategy: Attractions, surface, shape
- Is it same-substance (cohesion)?
- Is it different substances (adhesion)?
- Look at the surface (tension).
- Explain the effect.
Check your understanding
Which is cohesion?
- Salt dissolving
- Oil floating on water
- Water sticking to a glass
- Water molecules sticking to each other
Show the answer
Answer: D. Water molecules sticking to each other
Cohesion is attraction between like molecules.
Which is adhesion?
- Water boiling
- Water making a bead
- Water clinging to the side of a glass
- Water freezing
Show the answer
Answer: C. Water clinging to the side of a glass
Adhesion is attraction to other materials.
Why can a water strider stand on water?
- Its feet are magnetic
- Surface tension
- It is heavy
- Water is solid
Show the answer
Answer: B. Surface tension
Surface tension supports it.
Lesson 4: Acids, bases and pH
TEKS 8.6D
What you will learn
I can compare acids and bases and use pH relative to water.
I can place a substance on the pH scale and tell if it is an acid, base or neutral.
Key vocabulary
- pH
- A scale from 0 to 14 that measures how acidic or basic a solution is; pure water is 7.
Examples: Lemon juice: about 2; Bleach: about 13 - acid
- A substance with a pH below 7 that tastes sour and turns litmus red.
Examples: Vinegar; Lemon juice - base
- A substance with a pH above 7 that feels slippery and turns litmus blue.
Examples: Baking soda solution; Soap
Worked example
A pH meter reads 3.0 for lemon juice, 7.0 for pure water and 11.0 for ammonia cleaner. Classify each and compare them with water.
- Lemon juice: pH 3, which is below 7, so it is an acid.
Numbers under 7 mean more hydrogen ions than water, which is what makes a substance acidic. - Pure water: pH 7, which is neutral.
Water is the reference point, so the scale is defined relative to it. - Ammonia cleaner: pH 11, above 7, so it is a base.
Numbers over 7 mean fewer hydrogen ions than water and more hydroxide ions, which is what makes a substance basic. - Compare strength: lemon juice is 4 units below water and ammonia is 4 units above.
Each pH unit is a tenfold change, so being 4 units away from water means a 10,000-fold difference in acidity or basicity.
Strategy: Measure, compare to 7, classify, explain
- Find the pH.
- Compare with water at 7.
- Classify as acid, neutral or base.
- Use the result.
Check your understanding
What is the pH of pure water?
- 1
- 14
- 0
- 7
Show the answer
Answer: D. 7
Pure water has a pH of 7.
A solution has a pH of 2. What is it?
- Neutral
- A base
- A strong acid
- Pure water
Show the answer
Answer: C. A strong acid
A pH of 2 is strongly acidic.
Which is a base?
- Vinegar
- Baking soda solution
- Stomach acid
- Lemon juice
Show the answer
Answer: B. Baking soda solution
Baking soda solution is basic.
Lesson 5: Conservation of mass and chemical equations
TEKS 8.6E
What you will learn
I can show that mass is conserved in a chemical reaction by balancing the atoms in a chemical equation, including photosynthesis.
I can count atoms on both sides and decide if an equation is balanced.
Key vocabulary
- chemical reaction
- A process in which substances change into new substances with different properties.
Examples: Burning wood; Rusting iron - reactant and product
- Reactants are the starting substances; products are the new substances formed.
Examples: H₂ + O₂ (reactants), H₂O (product); CO₂ and H₂O as products of burning - law of conservation of mass
- In a chemical reaction, the total mass of the products equals the total mass of the reactants.
Examples: 10 g of reactants make 10 g of products; Atoms are rearranged, not lost
Worked example
Hydrogen reacts with oxygen to form water: 2H₂ + O₂ → 2H₂O. Show that the equation is balanced and mass is conserved.
- Count atoms on the left: 2H₂ has 4 H atoms, and O₂ has 2 O atoms.
The small number multiplies the symbol next to it and the big coefficient multiplies the whole formula, so 2 × 2 = 4 hydrogens. - Count atoms on the right: 2H₂O has 4 H atoms and 2 O atoms.
Two molecules of H₂O each have 2 H and 1 O, so 2 × 2 = 4 H and 2 × 1 = 2 O. - Compare: 4 H and 2 O on both sides.
Equal counts show that no atoms were created or destroyed, only rearranged. - Use masses: 4 g H + 32 g O = 36 g water.
Since the atoms are the same, the mass before equals the mass after, which is the law of conservation of mass.
Strategy: Count, compare, balance, check
- Count atoms on each side.
- Compare.
- Change coefficients only.
- Recount.
Check your understanding
What does the law of conservation of mass say?
- Mass doubles
- Mass is created
- Mass is destroyed
- Mass of reactants equals mass of products
Show the answer
Answer: D. Mass of reactants equals mass of products
Mass is conserved.
How many H atoms are in 3H₂O?
- 2
- 3
- 6
- 9
Show the answer
Answer: C. 6
3 × 2 = 6.
Which change balances an equation?
- Changing coefficients
- Adding new elements
- Erasing atoms
- Changing subscripts
Show the answer
Answer: A. Changing coefficients
Only coefficients change.