Grade 8 Science Unit 3: Forces, Motion and Waves
This Grade 8 Science unit, Forces, Motion and Waves, has 4 lessons that cover TEKS 8.7A, 8.7B, 8.8A, 8.8B. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
STAAR connection: Grade 8 Science is a subject tested by the State of Texas Assessments of Academic Readiness (STAAR). Texas lawmakers have voted to replace STAAR with shorter tests beginning in the 2027–28 school year; the tests are still built on the TEKS, so practicing the TEKS stays useful.
TEKS covered in this unit
- 8.7A Calculate and analyze how an object’s acceleration depends on net force and mass using Newton’s Second Law
- 8.7B Investigate and describe how Newton’s three laws operate together in systems such as vehicle restraints, sports, amusement rides, tectonic activity and rocket launches
- 8.8A Compare amplitude, frequency and wavelength in transverse waves, including across the electromagnetic spectrum
- 8.8B Explain uses of electromagnetic waves in applications such as radiation therapy, wireless technology, fiber optics, microwaves, ultraviolet sterilization, astronomy and X-rays
Lesson 1: Newton’s Second Law
TEKS 8.7A
What you will learn
I can use Newton’s Second Law, F = m × a, to calculate and analyze how acceleration depends on net force and mass.
I can solve for force, mass or acceleration.
Key vocabulary
- acceleration
- The rate at which an object’s velocity changes; measured in m/s².
Examples: A car speeding up from a stop; A ball slowing as it rolls uphill - net force
- The overall force on an object after all forces are combined.
Examples: 10 N right and 4 N left make 6 N right; Equal opposite forces make 0 N - Newton’s Second Law
- Acceleration equals net force divided by mass: a = F ÷ m, or F = m × a.
Examples: A heavy cart accelerates less than a light cart with the same push; Doubling the force doubles acceleration
Worked example
A 2 kg cart is pushed with a net force of 10 N. What is its acceleration?
- Write the law: F = m × a, so a = F ÷ m.
Rearranging first puts the unknown alone, which makes the arithmetic easier and lets you check units. - Substitute: a = 10 N ÷ 2 kg.
Replacing letters with measured values with units makes sure you use the right quantities in the right places. - Calculate: a = 5 m/s².
A newton is a kg·m/s², so N ÷ kg gives m/s², and the unit confirms the answer is an acceleration. - Interpret: the cart’s speed increases by 5 m/s every second.
Explaining the number in words connects the math to the motion, so the answer has meaning.
Strategy: Write, rearrange, substitute, interpret
- Write F = m × a.
- Solve for the unknown.
- Substitute with units.
- Interpret in words.
Check your understanding
A 4 kg object has a net force of 20 N. What is its acceleration?
- 16 m/s²
- 0.2 m/s²
- 80 m/s²
- 5 m/s²
Show the answer
Answer: D. 5 m/s²
20 ÷ 4 = 5 m/s².
If force stays the same and mass doubles, acceleration…
- Is zero
- Stays the same
- Doubles
- Is cut in half
Show the answer
Answer: D. Is cut in half
More mass means less acceleration.
What net force gives a 3 kg object an acceleration of 4 m/s²?
- 0.75 N
- 7 N
- 12 N
- 1 N
Show the answer
Answer: C. 12 N
3 × 4 = 12 N.
Lesson 2: Newton’s three laws working together
TEKS 8.7B
What you will learn
I can describe how Newton’s three laws work together in real systems such as seat belts, sports, amusement rides, earthquakes and rockets.
I can name inertia, force and acceleration and action-reaction pairs.
Key vocabulary
- inertia
- The tendency of an object to keep its motion unchanged unless a net force acts on it (Newton’s First Law).
Examples: Passengers lurching forward when a car brakes; A ball staying at rest - action-reaction pair
- Two forces of equal size and opposite direction acting on different objects (Newton’s Third Law).
Examples: A rocket pushes gas down; gas pushes the rocket up; Your foot pushes the ground; the ground pushes you - restraint
- A device, such as a seat belt, that applies a force to change a body’s motion safely.
Examples: Seat belt; Airbag
Worked example
A car traveling at 25 m/s stops suddenly in a crash. Use all three laws to explain how a seat belt protects a passenger.
- First Law: the passenger keeps moving forward at 25 m/s when the car stops.
Inertia means the body wants to continue in a straight line at the same speed unless a force acts. - Second Law: the belt applies a net force to slow the passenger, so acceleration depends on that force and the passenger’s mass.
A larger stopping force over a longer time is gentler, so belts that stretch slightly reduce the peak force. - Third Law: the passenger pushes on the belt, and the belt pushes back with an equal and opposite force.
The pair acts on different objects, which is why the belt can stop the passenger without the passenger’s push stopping the belt. - Result: the belt stops the body with the car, instead of the windshield stopping it suddenly.
Spreading the force over the strong chest and hips instead of a small area lowers injury.
Strategy: Resists change, F = m × a, equal and opposite
- Name the inertia.
- Find the net force and acceleration.
- Identify the action-reaction pair.
- Explain the system.
Check your understanding
A passenger lurches forward when a car brakes suddenly. Which law explains it?
- Law of gravity only
- Third Law
- Second Law
- First Law (inertia)
Show the answer
Answer: D. First Law (inertia)
Inertia explains the lurch.
Action-reaction forces act on…
- Only on the ground
- Only on rockets
- The same object
- Different objects
Show the answer
Answer: D. Different objects
The pair acts on different objects.
Why does a rocket accelerate faster as it burns fuel?
- Gravity disappears
- Mass decreases while force stays large
- Friction increases
- The Sun pushes it
Show the answer
Answer: B. Mass decreases while force stays large
Smaller mass gives larger acceleration.
Lesson 3: Waves: amplitude, frequency and wavelength
TEKS 8.8A
What you will learn
I can compare amplitude, frequency and wavelength in transverse waves, including electromagnetic waves.
I can read amplitude, wavelength and frequency and use v = f × λ.
Key vocabulary
- wavelength
- The distance from one crest to the next crest of a wave.
Examples: Distance between two ripples; Radio waves are long, X-rays are short - frequency
- The number of waves that pass a point each second, measured in hertz (Hz).
Examples: A wave that passes 5 times per second is 5 Hz; Radio station 100 MHz - amplitude
- The maximum height of a wave from its rest position; it relates to the energy of the wave.
Examples: A tall ocean wave; A loud sound has larger amplitude
Worked example
A rope wave has crests 2 m apart, and 3 crests pass a point each second. Find the wavelength, frequency and wave speed.
- Wavelength: the distance between crests is 2 m.
Crest to crest is the standard way to measure wavelength, so any student measuring it would get the same value. - Frequency: 3 crests per second is 3 Hz.
Counting how many waves go by each second gives frequency, which relates to how often the source vibrates. - Speed = frequency × wavelength = 3 Hz × 2 m = 6 m/s.
Each second, 3 waves of 2 m go past, so the wave front moves 6 m in 1 s. - Check the units: Hz is 1/s, so (1/s) × m = m/s.
Unit checks catch mistakes, and m/s confirms we computed a speed.
Strategy: Measure crest to crest, count per second, multiply
- Find wavelength.
- Find frequency.
- Multiply for speed.
- Compare amplitude for energy.
Check your understanding
What is wavelength?
- How fast it moves
- How many waves pass per second
- The height of the wave
- The distance from crest to crest
Show the answer
Answer: D. The distance from crest to crest
Wavelength is crest-to-crest distance.
A wave has a frequency of 4 Hz and a wavelength of 3 m. What is its speed?
- 0.75 m/s
- 7 m/s
- 12 m/s
- 1.3 m/s
Show the answer
Answer: C. 12 m/s
4 × 3 = 12 m/s.
Which property relates to a wave’s energy?
- Wavelength only
- Amplitude
- Name
- Color
Show the answer
Answer: B. Amplitude
Larger amplitude means more energy.
Lesson 4: Uses of electromagnetic waves
TEKS 8.8B
What you will learn
I can explain how different electromagnetic waves are used in medicine, communication, cooking, cleaning and astronomy.
I can match each electromagnetic wave to a use and a reason.
Key vocabulary
- electromagnetic spectrum
- The full range of electromagnetic waves arranged by wavelength and frequency, from radio waves to gamma rays.
Examples: Radio, microwave, infrared, visible, ultraviolet, X-ray, gamma; Light is a small part - ultraviolet (UV)
- Electromagnetic waves with a higher frequency than visible light that can kill germs and damage skin.
Examples: UV sterilizers for water; Sun tanning and sunburn - X-ray
- Very high-frequency electromagnetic waves that pass through soft tissue but are absorbed by dense bone.
Examples: Dental and bone X-ray images; Airport baggage scanners
Worked example
A doctor orders an X-ray of a broken arm. Explain why X-rays show bones.
- X-rays are electromagnetic waves with very high frequency and energy.
High energy lets them travel through soft materials instead of being absorbed. - Soft tissue lets most X-rays through; dense bone absorbs more of them.
The difference in absorption is the key because it creates contrast in the image. - A detector behind the arm records which X-rays pass through.
Where bone blocked the rays, the detector gets fewer, so bones show as lighter areas on the image. - Safety: the dose is small and a lead apron protects other body parts.
High-energy waves can damage cells, so the benefit of seeing the break must be weighed against the exposure.
Strategy: Wave, interaction, use, safety
- Name the wave.
- Say how it interacts with matter.
- Match it to the use.
- Note the safety trade-off.
Check your understanding
Which wave is used to take images of bones?
- Infrared
- Microwaves
- Radio waves
- X-rays
Show the answer
Answer: D. X-rays
X-rays image bones.
Which has the highest frequency?
- Microwaves
- Radio waves
- Gamma rays
- Visible light
Show the answer
Answer: C. Gamma rays
Gamma rays have the highest frequency.
Why can a microwave heat food?
- It adds fire
- It makes water molecules vibrate
- It freezes water
- It removes air
Show the answer
Answer: B. It makes water molecules vibrate
Water molecules absorb microwave energy.