Chemistry Unit 4: Chemical Bonding
This Chemistry unit, Chemical Bonding, has 4 lessons that cover TEKS C.7A, C.7B, C.7C, C.7D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- C.7A Construct an argument for how periodic trends such as electronegativity predict bonding
- C.7B Name and write formulas for ionic and covalent compounds using IUPAC rules
- C.7C Classify molecules by VSEPR geometry and draw electron dot structures
- C.7D Analyze properties of ionic, covalent and metallic substances in terms of intramolecular and intermolecular forces
Lesson 1: Electronegativity and bond type
TEKS C.7A
What you will learn
I can use periodic trends such as electronegativity to predict whether a bond is ionic, polar covalent or nonpolar covalent, and argue for my prediction.
I can find the electronegativity difference and classify the bond.
Key vocabulary
- ionic bond
- A bond formed when one atom transfers electrons to another, creating oppositely charged ions that attract.
Examples: NaCl; MgO - covalent bond
- A bond formed when two atoms share one or more pairs of electrons.
Examples: H₂O; CO₂ - polar bond
- A covalent bond in which the electrons are shared unequally, so one end is slightly negative and the other slightly positive.
Examples: The O–H bond; H–Cl
Worked example
Use electronegativity values (Na 0.9, Cl 3.0, H 2.1, O 3.5, C 2.5) to classify the bonds in NaCl, H₂O (O–H) and CH₄ (C–H).
- NaCl: difference = 3.0 − 0.9 = 2.1. A difference above about 1.7 means ionic.
A large difference means one atom pulls the electron away completely, so the electron is transferred. - O–H: 3.5 − 2.1 = 1.4. A difference from 0.4 to 1.7 means polar covalent.
Oxygen pulls harder than hydrogen, but not hard enough to take the electron, so the sharing is unequal. - C–H: 2.5 − 2.1 = 0.4. A difference below about 0.4 means nonpolar covalent.
The two atoms pull almost equally, so the electrons are shared nearly evenly. - The cutoffs are guides, not sharp lines.
Bonding is a continuum from equal sharing to full transfer, so the difference shows where on the scale a bond sits.
Strategy: Subtract, classify, justify
- Look up both electronegativities.
- Subtract (large − small).
- Classify: >1.7 ionic, 0.4–1.7 polar, <0.4 nonpolar.
- Name the types of elements.
Check your understanding
Which bond has the largest electronegativity difference?
- Cl–Cl
- H–H
- C–H
- Na–Cl
Show the answer
Answer: D. Na–Cl
NaCl has the biggest difference.
In an ionic bond, electrons are…
- Created
- Destroyed
- Shared equally
- Transferred
Show the answer
Answer: D. Transferred
Electrons move from one atom to the other.
A polar covalent bond has…
- Equal sharing
- No electrons
- Unequal sharing of electrons
- Transferred electrons
Show the answer
Answer: C. Unequal sharing of electrons
Sharing is uneven.
Lesson 2: Naming compounds and writing formulas
TEKS C.7B
What you will learn
I can name and write formulas for ionic and covalent compounds using IUPAC rules.
I can balance charges to write an ionic formula and use prefixes for covalent names.
Key vocabulary
- polyatomic ion
- A group of atoms bonded together that carries an overall charge, such as SO₄²⁻ or NH₄⁺.
Examples: NO₃⁻ (nitrate); OH⁻ (hydroxide) - binary covalent compound
- A molecule made of two different nonmetals, named with prefixes such as mono-, di-, tri-.
Examples: CO₂ carbon dioxide; N₂O₄ dinitrogen tetroxide - criss-cross method
- A way to write ionic formulas by using each ion’s charge number as the subscript of the other ion.
Examples: Al³⁺ and O²⁻ give Al₂O₃; Ca²⁺ and Cl⁻ give CaCl₂
Worked example
Write the formula for aluminum sulfate (Al³⁺ and SO₄²⁻) and name it back.
- Charges: Al³⁺ and SO₄²⁻.
Writing the charges first is the key to getting the subscripts right. - Find the least common multiple of 3 and 2, which is 6.
The total positive charge must equal the total negative charge, so use the smallest number of each ion that makes them equal. - 2 Al³⁺ = +6 and 3 SO₄²⁻ = −6, so Al₂(SO₄)₃.
Parentheses show that the 3 applies to the whole sulfate group, not just the oxygen. - Name: the metal first, then the polyatomic ion: aluminum sulfate.
The metal keeps its element name and the anion uses the ion’s name, so no prefixes are used for ionic compounds.
Strategy: Metal and nonmetal: balance charges. Two nonmetals: use prefixes
- Decide ionic or covalent.
- Write the charges or the prefixes.
- Balance or count.
- Name or write the formula.
Check your understanding
What is the formula for calcium chloride?
- CaCl₃
- Ca₂Cl
- CaCl
- CaCl₂
Show the answer
Answer: D. CaCl₂
Two Cl⁻ balance Ca²⁺.
What is the name of CO₂?
- Carbonic oxide
- Monocarbon dioxide
- Carbon oxide
- Carbon dioxide
Show the answer
Answer: D. Carbon dioxide
Covalent compounds use prefixes.
What is the name of FeCl₂?
- Iron chloride
- Iron(II) chloride
- Ferric chlorine
- Iron(III) chloride
Show the answer
Answer: B. Iron(II) chloride
The iron is Fe²⁺.
Lesson 3: VSEPR shapes and electron dot structures
TEKS C.7C
What you will learn
I can draw electron dot structures for molecules and classify their shapes using VSEPR.
I can count bonding and lone pairs to predict a molecule’s geometry.
Key vocabulary
- VSEPR theory
- Valence shell electron pair repulsion: electron groups around a central atom spread out as far apart as possible.
Examples: CH₄ is tetrahedral; CO₂ is linear - lone pair
- A pair of valence electrons that is not shared in a bond.
Examples: The two pairs on the oxygen of water; The pair on nitrogen in NH₃ - bond angle
- The angle between two bonds that share a central atom.
Examples: 109.5° in methane; 104.5° in water
Worked example
Draw the Lewis structure of water and predict its shape.
- Count valence electrons: 2(1) + 6 = 8.
The total number of valence electrons tells how many dots to place. - Place oxygen in the center and connect each H with a single bond (4 electrons).
Hydrogen can only hold two electrons, so it must be on the outside. - Put the remaining 4 electrons on oxygen as two lone pairs.
This gives oxygen eight electrons (octet) and each hydrogen two. - Four electron groups (2 bonds + 2 lone pairs) are tetrahedral, but the shape of the atoms is bent, with an angle of about 104.5°.
Lone pairs take more room than bonds, so they squeeze the bond angle below 109.5°.
Strategy: Count electrons, draw the structure, count groups
- Add valence electrons.
- Draw bonds and fill octets.
- Count electron groups.
- Name the shape.
Check your understanding
What is the shape of CH₄?
- Flat
- Bent
- Linear
- Tetrahedral
Show the answer
Answer: D. Tetrahedral
Four groups give a tetrahedron.
What is the shape of H₂O?
- Tetrahedral
- Linear
- Bent
- Trigonal planar
Show the answer
Answer: C. Bent
Lone pairs bend it.
VSEPR says electron groups…
- Attract
- Repel and spread apart
- Stay together
- Disappear
Show the answer
Answer: B. Repel and spread apart
Negative groups repel.
Lesson 4: Bonding and the properties of substances
TEKS C.7D
What you will learn
I can analyze the properties of ionic, covalent and metallic substances using the forces within and between particles.
I can explain melting point, conductivity and solubility from the type of bonding.
Key vocabulary
- crystal lattice
- A repeating three-dimensional pattern of alternating positive and negative ions in an ionic solid.
Examples: NaCl crystal; Table salt cubes - intermolecular force
- An attraction between separate molecules, much weaker than the bonds inside molecules.
Examples: Hydrogen bonds between water molecules; London forces in nonpolar gases - metallic bond
- The attraction between positive metal ions and a sea of shared, mobile valence electrons.
Examples: Copper wire; Gold jewelry
Worked example
NaCl melts at 801°C, but sugar (C₁₂H₂₂O₁₁) melts at about 186°C and decomposes. Explain the difference.
- NaCl is an ionic compound made of a lattice of Na⁺ and Cl⁻ ions.
The ions are held together in all directions by strong electrostatic attraction. - Melting NaCl requires breaking those ionic bonds.
Breaking strong attractions takes a lot of thermal energy, so the melting point is high. - Sugar is a molecular (covalent) compound whose molecules are held to each other by weaker intermolecular forces.
Melting only separates the molecules, without breaking the covalent bonds inside them. - Conclusion: ionic compounds usually have high melting points and molecular compounds low ones.
The difference in strength of the forces holding the particles together predicts the melting point.
Strategy: Name the particles, name the forces, predict the property
- Is it ions, molecules or metal?
- Name the force holding it together.
- Compare strengths.
- Predict melting point and conductivity.
Check your understanding
Why does NaCl have a high melting point?
- It has no ions
- It is a gas
- Weak molecular forces
- Strong ionic attractions
Show the answer
Answer: D. Strong ionic attractions
Ionic bonds are strong.
Solid NaCl does not conduct because…
- It has no ions
- It has no charge
- Its ions cannot move
- It has free electrons
Show the answer
Answer: C. Its ions cannot move
Ions must be free to move.
Which has a sea of mobile electrons?
- Ionic solids
- Metals
- Gases
- Molecular solids
Show the answer
Answer: B. Metals
Metals share electrons freely.