Chemistry Unit 8: Solutions
This Chemistry unit, Solutions, has 4 lessons that cover TEKS C.11A, C.11B, C.11C, C.11D, C.11E, C.11F. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- C.11A Describe water’s unique role in solutions in terms of polarity
- C.11B Distinguish among electrolytes, nonelectrolytes and unsaturated, saturated and supersaturated solutions
- C.11C Investigate how temperature affects solubility and how temperature, agitation and surface area affect dissolution rates
- C.11D Apply solubility rules to predict products of double replacement reactions
- C.11E Calculate solution concentration in molarity
- C.11F Calculate dilutions using molarity
Lesson 1: Water, polarity and types of solutions
TEKS C.11A C.11B
What you will learn
I can explain water’s role as a solvent in terms of polarity, and distinguish electrolytes and nonelectrolytes and unsaturated, saturated and supersaturated solutions.
I can explain “like dissolves like” and classify a solution by how much solute it holds.
Key vocabulary
- solvent and solute
- In a solution, the solvent is the substance that does the dissolving and the solute is the substance that is dissolved.
Examples: Water and salt; Alcohol and iodine - electrolyte
- A substance that forms ions in solution and so conducts electricity.
Examples: NaCl in water; HCl in water - saturated solution
- A solution that holds the maximum amount of solute at a given temperature.
Examples: A cup where extra sugar sinks; Salt at 36 g per 100 g water
Worked example
Explain why NaCl dissolves in water but oil does not.
- Water is polar: oxygen has a partial negative charge and hydrogen a partial positive charge.
The uneven charge distribution lets water attract charged particles. - Water molecules surround Na⁺ with their negative ends and Cl⁻ with their positive ends.
These ion-dipole attractions are strong enough to pull ions out of the crystal. - Oil is nonpolar, so it has no charges for water to attract.
Water molecules attract each other more than the oil, so they stay together and the oil is pushed out. - This is the rule “like dissolves like”: polar dissolves polar and ionic, and nonpolar dissolves nonpolar.
Matching the types of attraction predicts whether a mixture forms a solution.
Strategy: Polar or nonpolar, ions or molecules, how much
- Check polarity of both substances.
- Decide whether ions form.
- Compare with the solubility limit.
- Name the type.
Check your understanding
Why does water dissolve ionic compounds?
- It is a gas
- It is heavy
- It is nonpolar
- It is polar
Show the answer
Answer: D. It is polar
Polar water attracts ions.
Which is a nonelectrolyte?
- KOH
- HCl
- NaCl
- Sugar
Show the answer
Answer: D. Sugar
Sugar does not form ions.
A saturated solution…
- Can dissolve more
- Holds no solute
- Holds the maximum solute
- Is a gas
Show the answer
Answer: C. Holds the maximum solute
It is at the limit.
Lesson 2: Solubility and dissolving rates
TEKS C.11C
What you will learn
I can investigate how temperature affects solubility, and how temperature, stirring and surface area affect the rate of dissolving.
I can read a solubility curve and explain rate using collisions.
Key vocabulary
- solubility
- The maximum amount of solute that dissolves in a given amount of solvent at a given temperature.
Examples: 36 g NaCl per 100 g water at 20°C; KNO₃ at 60°C - solubility curve
- A graph showing how many grams of a solute dissolve in 100 g of water at different temperatures.
Examples: KNO₃ rising steeply; NaCl nearly flat - rate of dissolving
- How quickly a solute dissolves, which depends on temperature, stirring and the surface area of the solid.
Examples: Powdered sugar dissolving faster than a cube; Stirring tea
Worked example
Use a solubility curve: KNO₃ dissolves 32 g at 20°C and 110 g at 60°C per 100 g water. A saturated solution at 60°C is cooled to 20°C. How much crystallizes?
- At 60°C, the saturated solution holds 110 g.
Reading from the curve at the starting temperature gives the starting amount. - At 20°C, the most that can stay dissolved is 32 g.
The curve gives the new limit so anything beyond that must leave the solution. - Extra = 110 − 32 = 78 g of solid KNO₃ crystallizes.
The solution can no longer hold the excess, so it comes out as crystals. - Solids like KNO₃ dissolve more in hot water, which is why crystals form on cooling.
Added thermal energy helps break the solid’s attractions, so more can dissolve at higher temperatures.
Strategy: More collisions, faster dissolving
- Heat for faster collisions.
- Stir to refresh the surface.
- Crush for more surface.
- Read the curve for how much.
Check your understanding
Most solids dissolve more in…
- Ice
- Pressure
- Cold water
- Hot water
Show the answer
Answer: D. Hot water
Solubility rises with temperature.
Gas solubility with higher temperature…
- Doubles
- Stays the same
- Increases
- Decreases
Show the answer
Answer: D. Decreases
Gases escape when warm.
Which dissolves faster?
- A sugar cube
- Powdered sugar
- Neither
- They are equal
Show the answer
Answer: B. Powdered sugar
Smaller pieces expose more surface.
Lesson 3: Solubility rules and double replacement
TEKS C.11D
What you will learn
I can apply solubility rules to predict the products of double replacement reactions and write net ionic equations.
I can decide if a precipitate forms and name the spectator ions.
Key vocabulary
- precipitate
- An insoluble solid that forms when two solutions react.
Examples: AgCl from AgNO₃ + NaCl; PbI₂ yellow solid - spectator ion
- An ion that is present in the solution but does not take part in the reaction.
Examples: Na⁺ and NO₃⁻ in the silver chloride reaction; K⁺ in a precipitation - net ionic equation
- An equation that shows only the particles that actually change in a reaction.
Examples: Ag⁺ + Cl⁻ → AgCl(s); Pb²⁺ + 2I⁻ → PbI₂(s)
Worked example
Predict the products of AgNO₃(aq) + NaCl(aq) and decide whether a precipitate forms. (Rule: chlorides are soluble except those of Ag⁺, Pb²⁺ and Hg₂²⁺; nitrates and sodium compounds are always soluble.)
- In double replacement, the ions swap partners: Ag⁺ pairs with Cl⁻ and Na⁺ pairs with NO₃⁻.
Switching partners gives the possible products, AgCl and NaNO₃. - Check solubility: AgCl is an exception to the chloride rule, so it is insoluble.
Solubility rules tell which product will stay dissolved and which will come out as a solid. - NaNO₃ is soluble because all nitrates and sodium salts dissolve.
A soluble product stays as separate ions in the water. - AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq), so a white precipitate forms.
Noting the states (s) and (aq) shows what is a solid and what is dissolved.
Strategy: Swap, check solubility, find the solid
- Swap partners.
- Check each product with the rules.
- An insoluble product is the precipitate.
- Cancel spectators.
Check your understanding
AgCl is…
- An acid
- A gas
- Soluble
- Insoluble
Show the answer
Answer: D. Insoluble
AgCl forms a precipitate.
Spectator ions…
- Are destroyed
- Form the precipitate
- Do not change in the reaction
- Become gases
Show the answer
Answer: C. Do not change in the reaction
They stay in solution.
In double replacement, partners…
- Stay the same
- Swap
- Disappear
- Combine into one
Show the answer
Answer: B. Swap
Ions trade partners.
Lesson 4: Molarity and dilution
TEKS C.11E C.11F
What you will learn
I can calculate the molarity of a solution and use dilution to prepare solutions of a lower concentration.
I can use M = mol ÷ L and M₁V₁ = M₂V₂.
Key vocabulary
- molarity
- The concentration of a solution, in moles of solute per liter of solution (mol/L, written M).
Examples: 1.0 M NaCl; 0.10 M HCl - dilution
- Adding solvent to a solution to lower its concentration without changing the amount of solute.
Examples: Adding water to concentrated acid; Mixing juice concentrate - stock solution
- A concentrated solution that is diluted to make solutions of lower concentration.
Examples: 12 M HCl in a bottle; A 1.0 M standard
Worked example
What is the molarity of a solution with 29.2 g of NaCl (58.44 g/mol) in 500 mL of solution?
- Convert grams to moles: 29.2 ÷ 58.44 = 0.500 mol.
Molarity uses moles, so mass must be converted first. - Convert volume to liters: 500 mL = 0.500 L.
The unit in molarity is per liter, so milliliters must be changed. - M = 0.500 mol ÷ 0.500 L = 1.00 M.
Dividing moles of solute by liters of solution gives the concentration. - Check: half a mole in half a liter equals one mole per liter.
A simple proportion confirms the arithmetic which makes the arithmetic easy to verify mentally.
Strategy: Moles over liters; moles stay the same in dilution
- Convert grams to moles.
- Convert mL to L.
- Divide, or use M₁V₁ = M₂V₂.
- Check the units and direction.
Check your understanding
Molarity is…
- Liters per mole
- Moles per kg solvent
- Grams per liter
- Moles of solute per liter of solution
Show the answer
Answer: D. Moles of solute per liter of solution
Molarity is mol ÷ L.
0.50 mol in 2.0 L has a molarity of…
- 4.0 M
- 1.0 M
- 0.25 M
- 0.50 M
Show the answer
Answer: C. 0.25 M
0.25 M.
In dilution, what stays the same?
- Concentration
- Moles of solute
- Molarity
- Volume
Show the answer
Answer: B. Moles of solute
Solute amount is unchanged.