Chemistry Unit 9: Acids and Bases
This Chemistry unit, Acids and Bases, has 3 lessons that cover TEKS C.12A, C.12B, C.12C, C.12D, C.12E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- C.12A Name and write formulas for acids and bases using IUPAC rules
- C.12B Define acids and bases, distinguishing Arrhenius and Brønsted-Lowry definitions
- C.12C Differentiate between strong and weak acids and bases
- C.12D Predict products of acid-base reactions that form water
- C.12E Define pH and calculate it from hydrogen ion concentration
Lesson 1: Naming and defining acids and bases
TEKS C.12A C.12B
What you will learn
I can name and write formulas for common acids and bases, and distinguish the Arrhenius and Brønsted-Lowry definitions.
I can tell an acid from a base by the ion it produces or the proton it gives or takes.
Key vocabulary
- Arrhenius acid
- A substance that produces hydrogen ions (H⁺) when dissolved in water.
Examples: HCl; H₂SO₄ - Brønsted-Lowry acid
- A substance that donates a proton (H⁺) to another substance. A base accepts a proton.
Examples: HCl giving H⁺ to H₂O; NH₃ accepting H⁺ - conjugate pair
- Two substances that differ by one proton, such as an acid and the base formed when it loses H⁺.
Examples: HCl and Cl⁻; NH₄⁺ and NH₃
Worked example
Name or write the formula: (a) HCl(aq), (b) H₂SO₄(aq), (c) HNO₃(aq), (d) phosphoric acid, (e) NaOH.
- (a) Binary acid (no oxygen): hydro- + stem + -ic, so hydrochloric acid.
Naming rules depend on whether the anion contains oxygen. - (b) Sulfate (SO₄²⁻) ends in -ate, so the acid is sulfuric acid; (c) nitrate gives nitric acid.
The ending -ate becomes -ic, and -ite becomes -ous and the same swap works for every oxyacid. - (d) Phosphoric acid comes from phosphate PO₄³⁻, so three H⁺ are needed: H₃PO₄.
The acid’s formula must be neutral, so the number of H⁺ matches the anion’s charge. - (e) NaOH is sodium hydroxide, a base named like an ionic compound.
Bases are metal cations with hydroxide, so they use ionic naming.
Strategy: Who gives the proton, who takes it
- Find the species that loses H⁺ (acid).
- Find the species that gains H⁺ (base).
- Write the conjugates.
- Name using the rules.
Check your understanding
An Arrhenius acid produces…
- Neutrons
- Electrons
- OH⁻ in water
- H⁺ in water
Show the answer
Answer: D. H⁺ in water
It makes H⁺.
A Brønsted-Lowry base is…
- An OH⁻ producer only
- An electron donor
- A proton donor
- A proton acceptor
Show the answer
Answer: D. A proton acceptor
It accepts a proton.
What is the formula of sulfuric acid?
- H₂SO₃
- HSO₄
- H₂SO₄
- HS
Show the answer
Answer: C. H₂SO₄
Two hydrogens balance SO₄²⁻.
Lesson 2: Strong and weak, and neutralization
TEKS C.12C C.12D
What you will learn
I can distinguish strong and weak acids and bases and predict the products of neutralization reactions that form water.
I can explain strength by how much an acid ionizes and write a neutralization equation.
Key vocabulary
- strong acid
- An acid that ionizes almost completely in water, such as HCl, HNO₃ and H₂SO₄.
Examples: HCl; HNO₃ - weak acid
- An acid that only partly ionizes in water, so most of its molecules stay whole.
Examples: Acetic acid (vinegar); Citric acid - salt
- An ionic compound formed from the cation of a base and the anion of an acid in a neutralization.
Examples: NaCl; Na₂SO₄
Worked example
0.10 M HCl has a pH of 1, but 0.10 M acetic acid (CH₃COOH) has a pH of about 2.9. Both are 0.10 M. Explain.
- HCl is a strong acid and ionizes almost 100%: HCl → H⁺ + Cl⁻.
Nearly every molecule gives up its proton, so the H⁺ concentration is about 0.10 M. - Acetic acid is a weak acid and ionizes only about 1%.
Most molecules stay as CH₃COOH, so the H⁺ concentration is only about 0.0013 M. - A lower H⁺ concentration means a higher pH.
pH goes up when H⁺ goes down, which is why acetic acid is less acidic. - Strength is about ionization, not concentration.
A dilute strong acid can be less acidic than a concentrated weak acid, but concentration and strength are separate ideas.
Strategy: Acid + base = salt + water; strength is ionization
- Check how much the acid ionizes.
- Swap ions to name the salt.
- Balance H⁺ and OH⁻.
- Use mole ratios for titrations.
Check your understanding
A strong acid…
- Is always concentrated
- Ionizes about 1%
- Never ionizes
- Ionizes almost completely
Show the answer
Answer: D. Ionizes almost completely
It ionizes nearly 100%.
Which is a weak acid?
- H₂SO₄
- HNO₃
- HCl
- Acetic acid
Show the answer
Answer: D. Acetic acid
Acetic acid is weak.
Neutralization makes…
- Two acids
- A salt and water
- A gas only
- Two bases
Show the answer
Answer: B. A salt and water
Salt and water form.
Lesson 3: pH calculations
TEKS C.12E
What you will learn
I can define pH and calculate pH from the hydrogen ion concentration, and interpret the pH scale.
I can use pH = −log[H⁺] and see why each pH unit is a factor of ten.
Key vocabulary
- pH
- A measure of acidity: pH = −log[H⁺], where [H⁺] is the hydrogen ion concentration in mol/L.
Examples: pH 3 for lemon juice; pH 13 for drain cleaner - neutral solution
- A solution where [H⁺] = [OH⁻] = 1.0 × 10⁻⁷ M, with a pH of 7 at 25°C.
Examples: Pure water; Salt water - logarithmic scale
- A scale in which each step represents a tenfold change in the quantity.
Examples: Earthquake magnitude; Decibels
Worked example
Calculate the pH of a solution with [H⁺] = 1.0 × 10⁻³ M.
- Use pH = −log[H⁺].
The definition converts a concentration into a manageable number. - pH = −log(1.0 × 10⁻³).
Substitute the concentration into the formula with the concentration written in scientific notation. - log(10⁻³) = −3, so pH = 3.0.
The log of a power of ten is just the exponent, so this can be done without a calculator. - A pH of 3 is acidic.
A pH below 7 means more H⁺ than pure water, so the solution is acidic.
Strategy: Concentration to exponent to pH
- Write [H⁺].
- Take the negative log.
- Compare with 7.
- Check between whole numbers.
Check your understanding
pH is defined as…
- 1 ÷ [OH⁻]
- [H⁺]
- log[H⁺]
- −log[H⁺]
Show the answer
Answer: D. −log[H⁺]
pH = −log[H⁺].
The pH of 1.0 × 10⁻⁴ M H⁺ is…
- 10
- −4
- 4
- 0.0001
Show the answer
Answer: C. 4
It is 4.
A solution with pH 9 is…
- Acidic
- Basic
- A gas
- Neutral
Show the answer
Answer: B. Basic
pH above 7 is basic.