Geometry Unit 1: Coordinate and Transformational Geometry
This Geometry unit, Coordinate and Transformational Geometry, has 6 lessons that cover TEKS G.2A, G.2B, G.2C, G.3A, G.3B, G.3C, G.3D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- G.2A determine the coordinates of a point that is a given fractional distance less than one from one end of a line segment to the other, including the midpoint
- G.2B derive and use the distance, slope and midpoint formulas to verify geometric relationships, including congruence of segments and parallelism or perpendicularity of pairs of lines
- G.2C determine an equation of a line parallel or perpendicular to a given line that passes through a given point
- G.3A describe and perform transformations of figures in a plane using coordinate notation
- G.3B determine the image or pre-image of a given two-dimensional figure under a composition of rigid transformations, a composition of non-rigid transformations, and a composition of both
- G.3C identify the sequence of transformations that will carry a given pre-image onto an image on and off the coordinate plane
- G.3D identify and distinguish between reflectional and rotational symmetry in a plane figure
Lesson 1: Fractional distance and the midpoint
TEKS G.2A
What you will learn
I can find the coordinates of a point a given fraction of the way along a segment, including the midpoint.
The midpoint is the point halfway between two endpoints. For any fraction t, the point is (x₁ + t(x₂ − x₁), y₁ + t(y₂ − y₁)).
Key vocabulary
- midpoint
- The point that divides a segment into two congruent parts; its coordinates are the averages of the endpoints’ coordinates.
Examples: The midpoint of (0, 0) and (6, 8) is (3, 4); The midpoint of (−2, 5) and (6, −1) is (2, 2) - fractional distance
- A point located a fraction t (0 < t < 1) of the way from one endpoint to the other.
Examples: 1/4 of the way from (2, 3) to (10, 11) is (4, 5); 3/5 of the way along a segment - segment
- A part of a line with two endpoints, including every point between them.
Examples: The side of a triangle; A diameter of a circle
Worked example
Find the midpoint of the segment with endpoints A(−2, 5) and B(6, −1).
- Add the x-coordinates and divide by 2: (−2 + 6) ÷ 2 = 2.
Halfway between two numbers is their average, and the x-direction is handled separately from the y-direction. - Add the y-coordinates and divide by 2: (5 + (−1)) ÷ 2 = 2.
The same averaging idea works for y, and a negative number must be included with its sign. - Write the midpoint as (2, 2).
Check: moving from A to (2, 2) is +4 in x and −3 in y, and moving from (2, 2) to B is +4 and −3 again, so it is exactly halfway.
Strategy: Start plus a fraction of the change
- Find the change in x and the change in y from A to B.
- Multiply each change by the fraction.
- Add the results to the starting point A.
Check your understanding
What is the midpoint of (4, −6) and (10, 2)?
- (6, 8)
- (3, 4)
- (14, −4)
- (7, −2)
Show the answer
Answer: D. (7, −2)
(4 + 10)/2 = 7 and (−6 + 2)/2 = −2, so the midpoint is (7, −2).
Find the point 1/3 of the way from (0, 0) to (9, 12).
- (9, 12)
- (6, 8)
- (4.5, 6)
- (3, 4)
Show the answer
Answer: D. (3, 4)
1/3 of 9 is 3 and 1/3 of 12 is 4, so the point is (3, 4).
M(1, 4) is the midpoint of AB and A is (−3, 2). What are the coordinates of B?
- (2, 8)
- (−1, 3)
- (5, 6)
- (4, 2)
Show the answer
Answer: C. (5, 6)
The move from A to M is +4 and +2, so B is M plus (4, 2) = (5, 6).
Lesson 2: Distance, slope and midpoint to verify relationships
TEKS G.2B
What you will learn
I can use the distance, slope and midpoint formulas to verify that segments are congruent and that lines are parallel or perpendicular.
The distance formula d = √((x₂ − x₁)² + (y₂ − y₁)²) finds length. Slope = rise/run. Parallel lines have equal slopes; perpendicular lines have slopes that are negative reciprocals.
Key vocabulary
- distance formula
- A formula that finds the length between two points using the Pythagorean theorem on their x- and y-changes.
Examples: Distance from (1, 2) to (4, 6) is 5; Distance from (0, 0) to (5, 12) is 13 - parallel lines
- Lines in the same plane that never meet; they have the same slope.
Examples: y = 2x + 1 and y = 2x − 4; Opposite sides of a rectangle - perpendicular lines
- Lines that meet at a right angle; their slopes multiply to −1 (negative reciprocals).
Examples: Slopes 3 and −1/3; Adjacent sides of a rectangle
Worked example
Triangle ABC has A(1, 1), B(5, 1), C(3, 5). Show that AC and BC are congruent.
- Find AC: Δx = 2 and Δy = 4, so AC = √(2² + 4²) = √20.
Squaring each change removes negatives so the order of points does not matter. - Find BC: Δx = −2 and Δy = 4, so BC = √((−2)² + 4²) = √20.
The x-change is negative this time, but squaring gives the same 4, so both sides measure the same. - Both lengths are √20, so AC ≅ BC and the triangle is isosceles.
Congruent segments have equal lengths, which is what the formula can verify.
Strategy: Verify with formulas
- Find the changes in x and y between the points.
- Use distance for length, slope for direction.
- State the conclusion: equal lengths mean congruent; equal slopes mean parallel; slopes multiplying to −1 mean perpendicular.
Check your understanding
What is the distance between (−1, 2) and (5, 10)?
- 8
- √28
- 14
- 10
Show the answer
Answer: D. 10
√(6² + 8²) = √100 = 10.
Which pair of slopes shows perpendicular lines?
- 2 and 2
- −2/3 and −3/2
- 2/3 and 3/2
- 2/3 and −3/2
Show the answer
Answer: D. 2/3 and −3/2
(2/3)(−3/2) = −1, so the lines are perpendicular.
Points A(0, 0), B(3, 1) and C(6, 2) lie on a line. What is the slope of AB and BC?
- 3 and 1/3
- Both are 1/3
- Both are 3
- 1/3 and −3
Show the answer
Answer: B. Both are 1/3
AB has rise 1, run 3 and BC has rise 1, run 3, so both slopes are 1/3 and the points are collinear.
Lesson 3: Equations of parallel and perpendicular lines
TEKS G.2C
What you will learn
I can write the equation of a line through a given point that is parallel or perpendicular to a given line.
A parallel line keeps the same slope. A perpendicular line uses the negative reciprocal slope. Then use point-slope form y − y₁ = m(x − x₁) with the given point.
Key vocabulary
- negative reciprocal
- The number you get by flipping a fraction and changing its sign; slopes of perpendicular lines are negative reciprocals.
Examples: The negative reciprocal of 2/5 is −5/2; The negative reciprocal of −3 is 1/3 - point-slope form
- An equation of a line y − y₁ = m(x − x₁) built from the slope m and one point (x₁, y₁).
Examples: y − 3 = 2(x − 1); y + 4 = −1/2(x − 6) - slope-intercept form
- An equation y = mx + b that shows slope m and y-intercept b.
Examples: y = 2x + 1; y = −3/4x + 5
Worked example
Write the equation of the line through (2, 9) that is parallel to y = 3x − 1.
- Read the slope of the given line: m = 3.
In y = mx + b form the slope is the coefficient of x, so no calculation is needed. - Parallel lines have the same slope, so the new line also has m = 3.
Lines with equal slopes rise at the same rate and never meet. - Use point-slope with (2, 9): y − 9 = 3(x − 2), which simplifies to y = 3x + 3.
Distributing gives 3x − 6, and adding 9 gives +3. The new intercept (3) differs from −1, so the lines are distinct and parallel.
Strategy: Slope then point
- Find the slope of the given line.
- Keep it (parallel) or flip and change sign (perpendicular).
- Substitute the point into y − y₁ = m(x − x₁) and simplify.
Check your understanding
A line is parallel to y = −4x + 2 and passes through (0, 7). What is its equation?
- y = −4x + 2
- y = −1/4x + 7
- y = 4x + 7
- y = −4x + 7
Show the answer
Answer: D. y = −4x + 7
The slope stays −4 and the line crosses the y-axis at 7.
A line is perpendicular to y = 3x − 5. What is its slope?
- −3
- 3
- −1/3
- 1/3
Show the answer
Answer: C. −1/3
The negative reciprocal of 3 is −1/3.
Write the equation of the line through (0, 4) perpendicular to y = 1/2x + 1.
- y = 2x + 4
- y = −2x + 4
- y = 1/2x + 4
- y = −1/2x + 4
Show the answer
Answer: B. y = −2x + 4
Perpendicular slope is −2 and the line crosses at (0, 4).
Lesson 4: Transformations in coordinate notation
TEKS G.3A
What you will learn
I can describe and perform translations, reflections, rotations and dilations using coordinate notation.
A transformation moves or resizes a figure. Coordinate notation such as (x, y) → (x + 3, y − 2) tells exactly how each point changes. Translations, reflections and rotations are rigid (shape and size stay the same); dilations change size.
Key vocabulary
- translation
- A slide of every point the same distance in the same direction: (x, y) → (x + a, y + b).
Examples: (x, y) → (x − 5, y + 3); Moving a figure 4 units right - reflection
- A flip across a line so each point and its image are the same distance from the line.
Examples: Over the x-axis: (x, y) → (x, −y); Over the y-axis: (x, y) → (−x, y) - rotation
- A turn of every point by the same angle around a fixed point. About the origin, 90° counterclockwise sends (x, y) to (−y, x).
Examples: 180°: (x, y) → (−x, −y); 270° counterclockwise: (x, y) → (y, −x)
Worked example
Translate triangle A(1, 2), B(4, 2), C(3, 5) using (x, y) → (x − 5, y + 3). Find the image.
- Apply the rule to A: (1 − 5, 2 + 3) = (−4, 5).
Subtract 5 from each x (a move left) and add 3 to each y (a move up). - Apply it to B and C: B′ = (4 − 5, 2 + 3) = (−1, 5); C′ = (3 − 5, 5 + 3) = (−2, 8).
Every vertex moves by the same amount, so the shape does not change. - Check the side AB: it is 3 units long and A′B′ is also 3 units long.
A translation is rigid, so lengths and angles must match; checking one side catches arithmetic errors.
Strategy: Apply the rule to every point
- Write the rule in coordinate notation.
- Substitute each vertex into the rule.
- Plot or check that shape and size match (rigid) or scale correctly (dilation).
Check your understanding
What is the image of (5, −2) under (x, y) → (x − 6, y + 4)?
- (1, 2)
- (−1, −6)
- (11, 2)
- (−1, 2)
Show the answer
Answer: D. (−1, 2)
5 − 6 = −1 and −2 + 4 = 2.
Which rule reflects a point over the y-axis?
- (x, y) → (y, x)
- (x, y) → (x, −y)
- (x, y) → (−x, y)
- (x, y) → (−y, x)
Show the answer
Answer: C. (x, y) → (−x, y)
Over the y-axis the x-coordinate changes sign and y stays the same.
Rotate (2, 5) 90° counterclockwise about the origin.
- (5, −2)
- (−5, 2)
- (5, 2)
- (−2, −5)
Show the answer
Answer: B. (−5, 2)
(−5, 2) is the opposite of 5 in x and 2 in y.
Lesson 5: Compositions and mapping a pre-image onto an image
TEKS G.3B G.3C
What you will learn
I can find the image of a figure after a composition of transformations and describe the sequence that maps a pre-image onto an image.
A composition does one transformation and then another on the result. The order can matter. To find a sequence, compare orientation, size and position of the image with the pre-image.
Key vocabulary
- composition of transformations
- Applying one transformation to a figure and then another transformation to its image.
Examples: Reflect, then translate; Dilate, then reflect - pre-image and image
- The original figure is the pre-image; the figure after the transformation is the image, named with prime marks A′.
Examples: A, B, C and A′, B′, C′; A″ after two steps - rigid and non-rigid
- Rigid transformations (translation, reflection, rotation) keep size and shape; non-rigid transformations (dilations) change size.
Examples: Reflection is rigid; A dilation by 2 is non-rigid
Worked example
Triangle A(1, 1), B(3, 1), C(1, 4) is reflected over the y-axis and then translated by (x, y) → (x + 2, y − 3). Find A″, B″, C″.
- Reflect over the y-axis with (x, y) → (−x, y): A′ = (−1, 1), B′ = (−3, 1), C′ = (−1, 4).
The first transformation is applied to the original points, and only the x-coordinates change sign. - Translate each image point with (x + 2, y − 3): A″ = (1, −2), B″ = (−1, −2), C″ = (1, 1).
The second transformation is applied to the first image, not the original points. - Check congruence: AB = 2 and A″B″ = 2.
Both steps are rigid, so the final figure must be congruent to the original.
Strategy: Step by step on the points
- Apply the first transformation to every vertex.
- Apply the second to the new points.
- Compare with the target or check congruence and similarity.
Check your understanding
A point (3, 2) is reflected over the x-axis and then translated by (x + 1, y + 4). Where does it end?
- (3, 6)
- (2, −2)
- (4, 6)
- (4, 2)
Show the answer
Answer: D. (4, 2)
Reflection gives (3, −2); translation gives (4, 2).
Which composition produces an image that is NOT congruent to the pre-image?
- Two reflections
- A rotation followed by a translation
- A dilation followed by a reflection
- A translation followed by a rotation
Show the answer
Answer: C. A dilation followed by a reflection
A dilation changes the size, so the final figure is not congruent.
A figure is dilated by 3 and then dilated by 1/3 (both centered at the origin). What is the result?
- It returns to the original size
- It disappears
- It is 9 times smaller
- It is 3 times larger
Show the answer
Answer: A. It returns to the original size
The combined scale factor is 3 · 1/3 = 1.
Lesson 6: Reflectional and rotational symmetry
TEKS G.3D
What you will learn
I can identify and tell apart reflectional and rotational symmetry in a plane figure.
A figure has reflectional symmetry if a line divides it into mirror-image halves. It has rotational symmetry if a turn of less than 360° about its center maps it onto itself. The smallest turning angle is 360° ÷ n for n matching positions.
Key vocabulary
- line of symmetry
- A line that divides a figure into two mirror-image halves.
Examples: A rectangle has 2 lines of symmetry; A regular pentagon has 5 - rotational symmetry
- The property that a figure looks the same after a turn of less than 360° about its center.
Examples: An equilateral triangle turns onto itself every 120°; A square every 90° - order of rotational symmetry
- The number of times a figure fits onto itself during one full 360° turn.
Examples: A square has order 4; A regular hexagon has order 6
Worked example
Describe the symmetry of a rectangle that is not a square.
- Look for lines of symmetry: the line through the midpoints of opposite sides works, in two directions, so there are 2 lines.
Folding along a diagonal does not make halves match because the rectangle’s sides have different lengths. - Check rotations: turning 180° sends each vertex to the opposite vertex, so it fits onto itself.
A 90° turn would make the long side lie where the short side was, so it fails. - State the result: 2 lines of symmetry and rotational symmetry of 180° (order 2).
Including both kinds separately shows the figure’s full symmetry; 360° ÷ 2 = 180°.
Strategy: Fold and turn
- Look for fold lines that match the halves.
- Turn the figure about its center and find the smallest angle that fits.
- Report the number of lines and the order or angle of rotation.
Check your understanding
How many lines of symmetry does a square have?
- 8
- 1
- 2
- 4
Show the answer
Answer: D. 4
A square has 2 midpoint lines and 2 diagonal lines.
What is the smallest angle of rotational symmetry of a regular hexagon?
- 30°
- 60°
- 90°
- 120°
Show the answer
Answer: B. 60°
360° ÷ 6 = 60°.
Which figure has rotational symmetry but no line of symmetry?
- A parallelogram that is not a rectangle or rhombus
- An equilateral triangle
- An isosceles trapezoid
- A square
Show the answer
Answer: A. A parallelogram that is not a rectangle or rhombus
A generic parallelogram maps onto itself after 180° but has no mirror line.