Texas Test Academy

Take learning by the horns.

Geometry Unit 2: Logical Argument and Constructions

This Geometry unit, Logical Argument and Constructions, has 5 lessons that cover TEKS G.4A, G.4B, G.4C, G.4D, G.5A, G.5B, G.5C, G.5D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.

Practice this unit with interactive questions

TEKS covered in this unit

Lesson 1: Undefined terms, postulates and theorems

TEKS G.4A

What you will learn

I can tell apart undefined terms, definitions, postulates, conjectures and theorems.

Geometry is built like a ladder. Undefined terms (point, line, plane) are the starting ideas, definitions name things precisely, postulates are accepted without proof, a conjecture is an unproved guess, and a theorem is proved from earlier facts.

Key vocabulary

postulate
A statement accepted as true without proof; it is a starting rule for proofs.
Examples: Through two points there is exactly one line; A line segment can be measured
theorem
A statement that has been proved using definitions, postulates and earlier theorems.
Examples: Vertical angles are congruent; The Pythagorean Theorem
conjecture
A statement believed to be true based on patterns but not yet proved.
Examples: Every even number greater than 2 is the sum of two primes; The diagonals of every quadrilateral are equal

Worked example

Classify “A point has no size” and “a line is a set of points extending forever.”

  1. Ask whether it can be defined using simpler geometric ideas.
    Point, line and plane cannot be defined from simpler terms without going in a circle, so they are the starting ideas.
  2. These sentences only describe the ideas; they do not define them from simpler terms.
    A description helps you picture a point or line but is not a formal definition, which is why they are called undefined terms.
  3. Conclusion: point, line and plane are undefined terms.
    Every other definition, such as “a segment is part of a line between two points,” is built on these.

Strategy: Classify by proof status

Check your understanding

  1. Which is an undefined term in geometry?

    1. Rectangle
    2. Circle
    3. Triangle
    4. Plane
    Show the answer

    Answer: D. Plane

    Point, line and plane are the undefined terms.

  2. A statement accepted without proof is a…

    1. Counterexample
    2. Conjecture
    3. Theorem
    4. Postulate
    Show the answer

    Answer: D. Postulate

    Postulates are accepted as true.

  3. A proved statement is a…

    1. Postulate
    2. Conjecture
    3. Theorem
    4. Undefined term
    Show the answer

    Answer: C. Theorem

    A theorem is established by proof.

Practice this lesson with interactive questions

Lesson 2: Converse, inverse and contrapositive

TEKS G.4B

What you will learn

I can write the converse, inverse and contrapositive of a conditional statement and decide whether each is true; I can explain a biconditional.

A conditional is “If p, then q.” The converse swaps them (If q, then p), the inverse negates both (If not p, then not q), and the contrapositive does both (If not q, then not p). A conditional and its contrapositive always have the same truth value.

Key vocabulary

converse
The statement formed by switching the hypothesis and conclusion of a conditional.
Examples: If a figure is a rectangle, then it is a square (converse of “If a figure is a square, then it is a rectangle”); If two angles are congruent, then they are vertical
contrapositive
The statement formed by negating both parts of the converse; it is true exactly when the original conditional is true.
Examples: If a figure is not a rectangle, then it is not a square; If it is not raining, then it is not pouring
biconditional
A statement “p if and only if q” that is true only when both the conditional and its converse are true.
Examples: A number is even if and only if it is divisible by 2; Two angles are supplementary if and only if their measures add to 180°

Worked example

Write the converse, inverse and contrapositive of “If a figure is a square, then it is a rectangle,” and decide each truth value.

  1. Original: true, since every square has four right angles and two pairs of parallel sides.
    The definition of a rectangle fits every square.
  2. Converse: “If a figure is a rectangle, then it is a square” is false.
    A 2 by 5 rectangle is a counterexample because it has no four equal sides.
  3. Inverse: “If a figure is not a square, then it is not a rectangle” is false, and the contrapositive “If a figure is not a rectangle, then it is not a square” is true.
    The contrapositive always matches the original, and the inverse matches the converse, so these truth values follow the pattern.

Strategy: Swap, negate, test

Check your understanding

  1. The contrapositive of “If it rains, the ground is wet” is…

    1. If it rains, the ground is dry
    2. If it does not rain, the ground is not wet
    3. If the ground is wet, then it rained
    4. If the ground is not wet, then it did not rain
    Show the answer

    Answer: D. If the ground is not wet, then it did not rain

    The contrapositive reverses and negates both parts.

  2. The converse of “If x = 3, then x² = 9” is…

    1. If x = 3, then x² = 6
    2. If x² ≠ 9, then x ≠ 3
    3. If x ≠ 3, then x² ≠ 9
    4. If x² = 9, then x = 3
    Show the answer

    Answer: D. If x² = 9, then x = 3

    The converse swaps the hypothesis and conclusion.

  3. Is the converse of “If x = 3, then x² = 9” true?

    1. Yes, always
    2. No, x could be −3
    3. It has no truth value
    4. Yes, only if x > 0
    Show the answer

    Answer: B. No, x could be −3

    x = −3 also gives 9, so the converse is false.

Practice this lesson with interactive questions

Lesson 3: Counterexamples and spherical geometry

TEKS G.4C G.4D

What you will learn

I can disprove a conjecture with a counterexample and compare Euclidean and spherical geometry.

One counterexample is enough to show a statement is false. In Euclidean geometry (a flat plane) a triangle has 180° and parallel lines exist. On a sphere, lines are great circles, there are no parallel lines, and a triangle’s angle sum is more than 180°.

Key vocabulary

counterexample
A single example that makes the hypothesis true and the conclusion false, proving a statement false.
Examples: 2 shows “all primes are odd” is false; x = 1/2 shows “x² > x for all x” is false
spherical geometry
Geometry on the surface of a sphere, where “lines” are great circles.
Examples: Flight paths on Earth; Longitude lines meeting at the poles
great circle
A circle on a sphere whose center is the center of the sphere; it is the shortest path between two points on the sphere.
Examples: The equator; Any line of longitude

Worked example

Disprove the conjecture “If x is a real number, then x² > x.”

  1. Test values: x = 3 gives 9 > 3, which works.
    Patterns can fool you because many numbers fit, so a few successes do not prove a statement.
  2. Look for a number that might break it: x = 1 gives 1² = 1, which is not greater than 1.
    The statement says “greater than,” so equality breaks it, and 0 and 1/2 also fail.
  3. A single counterexample, x = 1, shows the conjecture is false.
    One failure is enough because the statement claimed to work for every real number.

Strategy: Find the counterexample

Check your understanding

  1. Which number is a counterexample to “All prime numbers are odd”?

    1. 15
    2. 9
    3. 3
    4. 2
    Show the answer

    Answer: D. 2

    2 is prime and even, so the statement is false.

  2. How many counterexamples are needed to disprove a conjecture?

    1. Ten
    2. Two
    3. One
    4. Infinitely many
    Show the answer

    Answer: C. One

    A single counterexample disproves it.

  3. On a sphere, a “line” is…

    1. A straight edge
    2. A great circle
    3. A parabola
    4. A small circle
    Show the answer

    Answer: B. A great circle

    Great circles act as lines.

Practice this lesson with interactive questions

Lesson 4: Conjectures and compass-and-straightedge constructions

TEKS G.5A G.5B G.5C

What you will learn

I can use patterns to make geometric conjectures and use a compass and straightedge to construct congruent segments and angles, bisectors, perpendicular lines and parallel lines.

A construction uses only a compass and straightedge, so every step relies on equal radii. Constructions let you investigate and form conjectures that can later be proved.

Key vocabulary

compass and straightedge
The two tools allowed for classical constructions: a compass makes arcs of equal radius, a straightedge draws straight lines without measuring.
Examples: Copying a segment with an arc; Bisecting an angle
perpendicular bisector
A line that is perpendicular to a segment and passes through its midpoint.
Examples: The line through the intersections of arcs drawn from both endpoints; The mediator of a segment
angle bisector
A ray that divides an angle into two congruent angles.
Examples: A ray drawn through the intersection of two equal arcs inside the angle; The bisector of a 60° angle makes two 30° angles

Worked example

Investigate: measure the interior angle sums of a triangle, a quadrilateral and a pentagon, and make a conjecture.

  1. Triangle: 180°; quadrilateral: 360°; pentagon: 540°.
    Splitting each polygon into triangles from one vertex gives 1, 2 and 3 triangles.
  2. Look for a pattern: each extra side adds 180°.
    Each extra side adds one more triangle, and every triangle contributes 180°.
  3. Conjecture: the interior angle sum of an n-sided polygon is (n − 2) · 180°.
    A conjecture predicts new cases, such as a hexagon with (6 − 2) · 180° = 720°, which can then be checked.

Strategy: Construct, measure, conjecture

Check your understanding

  1. A compass construction guarantees that two segments are congruent because…

    1. They are parallel
    2. They were measured with a ruler
    3. They look equal
    4. They are drawn with the same radius
    Show the answer

    Answer: D. They are drawn with the same radius

    Arcs of the same radius have equal lengths from the center.

  2. What does the perpendicular bisector of a segment pass through?

    1. The longest side
    2. An endpoint
    3. The midpoint at a right angle
    4. A random point
    Show the answer

    Answer: C. The midpoint at a right angle

    It meets the segment at its midpoint at 90°.

  3. The interior angles of a hexagon sum to…

    1. 540°
    2. 720°
    3. 360°
    4. 900°
    Show the answer

    Answer: B. 720°

    (6 − 2) · 180° = 720°.

Practice this lesson with interactive questions

Lesson 5: The Triangle Inequality theorem

TEKS G.5D

What you will learn

I can verify and apply the Triangle Inequality theorem.

The Triangle Inequality theorem says the sum of any two sides of a triangle must be greater than the third side. If one side is as long as the other two together, the sides lie flat and cannot make a triangle.

Key vocabulary

Triangle Inequality theorem
The sum of the lengths of any two sides of a triangle is greater than the length of the third side.
Examples: 3, 4, 5 works: 3 + 4 > 5; 2, 3, 9 fails: 2 + 3 < 9
degenerate triangle
Three segments where two sides add exactly to the third, so the triangle is flat and has no area.
Examples: Sides 4, 5 and 9; Sides 6, 6 and 12
range of the third side
If two sides measure a and b, the third side x must satisfy |a − b| < x < a + b.
Examples: For sides 7 and 12, 5 < x < 19; For sides 3 and 8, 5 < x < 11

Worked example

Can segments of lengths 5, 6 and 10 form a triangle?

  1. Pick the two shorter sides and add: 5 + 6 = 11.
    Only the shorter two need to be compared with the longest, because if they are big enough the other sums work too.
  2. Compare with the longest side: 11 > 10.
    The sum beats the longest side, so the two shorter sides can reach around and meet.
  3. Yes, a triangle can be formed.
    Check the other pairs for safety: 5 + 10 > 6 and 6 + 10 > 5 both hold.

Strategy: Short two beat the long one

Check your understanding

  1. Which three lengths can form a triangle?

    1. 1, 2, 4
    2. 2, 5, 7
    3. 3, 4, 8
    4. 6, 8, 11
    Show the answer

    Answer: D. 6, 8, 11

    6 + 8 = 14 > 11, so they form a triangle.

  2. Which lengths do NOT form a triangle?

    1. 5, 5, 5
    2. 4, 5, 6
    3. 3, 4, 7
    4. 7, 8, 10
    Show the answer

    Answer: C. 3, 4, 7

    3 + 4 = 7, not greater than 7, so the triangle is flat.

  3. Two sides are 8 and 10. The third side could be…

    1. 5
    2. 18
    3. 2
    4. 1
    Show the answer

    Answer: A. 5

    The third side must be between 2 and 18, so 5 works.

Practice this lesson with interactive questions