Geometry Unit 5: Two- and Three-Dimensional Figures
This Geometry unit, Two- and Three-Dimensional Figures, has 5 lessons that cover TEKS G.10A, G.10B, G.11A, G.11B, G.11C, G.11D. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- G.10A identify the shapes of two-dimensional cross-sections of prisms, pyramids, cylinders, cones and spheres and identify three-dimensional objects generated by rotations of two-dimensional shapes
- G.10B determine and describe how changes in the linear dimensions of a shape affect its perimeter, area, surface area or volume, including proportional and non-proportional dimensional change
- G.11A apply the formula for the area of regular polygons to solve problems using appropriate units of measure
- G.11B determine the area of composite two-dimensional figures comprised of a combination of triangles, parallelograms, trapezoids, kites and regular polygons
- G.11C apply the formulas for the total and lateral surface area of three-dimensional objects, including prisms, pyramids, cones, cylinders, spheres and composite figures, to solve problems using appropriate units of measure
- G.11D apply the formulas for the volume of three-dimensional objects, including prisms, pyramids, cones, cylinders, spheres and composite figures, to solve problems using appropriate units of measure
Lesson 1: Cross-sections and solids of rotation
TEKS G.10A
What you will learn
I can identify the shapes of cross-sections of solids and the solids generated by rotating a two-dimensional shape.
A cross-section is the shape you see when a plane slices through a solid. A solid of revolution is made by spinning a flat shape around a line (the axis).
Key vocabulary
- cross-section
- The two-dimensional shape formed where a plane cuts through a three-dimensional solid.
Examples: A circle from a horizontal cut of a cylinder; A rectangle from a vertical cut through a cylinder’s axis - solid of revolution
- A three-dimensional solid formed by rotating a plane figure around a line.
Examples: A right triangle spun about a leg makes a cone; A rectangle spun about a side makes a cylinder - axis of rotation
- The fixed line around which a shape is spun to generate a solid.
Examples: A leg of a right triangle; The diameter of a semicircle
Worked example
Describe the cross-sections of a cone cut by three different planes.
- A plane parallel to the base gives a circle.
Every point at the same height is at the same distance from the axis, so the slice is round. - A plane through the apex and perpendicular to the base gives a triangle.
The slice contains the apex and two straight slant sides, which form a triangle. - A plane tilted across the cone gives an ellipse.
A slanted cut stretches the circle in one direction, which is why conic sections are studied later.
Strategy: Slice or spin
- Picture the plane or the axis in the solid.
- Trace which points are the same distance from the center or axis.
- Name the resulting shape or solid.
Check your understanding
A plane cuts a cube parallel to one face. The cross-section is a…
- Hexagon
- Triangle
- Circle
- Square
Show the answer
Answer: D. Square
A parallel cut through a cube matches the face, which is a square.
Every cross-section of a sphere is a…
- Triangle
- Ellipse only
- Square
- Circle
Show the answer
Answer: D. Circle
Sphere slices are always circles.
Rotating a rectangle about one of its sides makes a…
- Sphere
- Cone
- Cylinder
- Pyramid
Show the answer
Answer: C. Cylinder
A rectangle spun about a side forms a cylinder.
Lesson 2: How changing dimensions changes perimeter, area and volume
TEKS G.10B
What you will learn
I can describe how changing linear dimensions changes perimeter, area, surface area and volume, including proportional and non-proportional changes.
If every length is multiplied by k (a proportional change), the perimeter is multiplied by k, the area and surface area by k², and the volume by k³. If only one dimension changes, the effects are different.
Key vocabulary
- proportional change
- A change in which every linear dimension is multiplied by the same factor k.
Examples: A square with side 4 becomes side 12; A cube with side 3 becomes side 6 - area scale factor
- When lengths change by factor k, areas change by k².
Examples: k = 3 gives area × 9; k = 1/2 gives area × 1/4 - volume scale factor
- When lengths change by factor k, volumes change by k³.
Examples: k = 2 gives volume × 8; k = 3 gives volume × 27
Worked example
A square has side 4. Its side is multiplied by 3. Compare the perimeters and areas.
- Original: perimeter 16, area 16.
Starting numbers show the “before” so the change can be measured. - New square: side 12, perimeter 48, area 144.
Perimeter is a length, so it triples (16 → 48). - The area went from 16 to 144, which is 9 times, or 3².
Area measures a two-dimensional region, so it changes by the square of the linear factor.
Strategy: Linear factor first
- Find the linear scale factor k.
- Area and surface area use k², volume uses k³, perimeter uses k.
- If only some dimensions change, recompute the measure directly.
Check your understanding
A circle’s radius is tripled. Its area is multiplied by…
- 27
- 6
- 3
- 9
Show the answer
Answer: D. 9
3² = 9.
A cube’s edge is multiplied by 5. Its volume is multiplied by…
- 15
- 5
- 25
- 125
Show the answer
Answer: D. 125
5³ = 125.
A figure is shrunk by a scale factor of 1/2. Its perimeter is multiplied by…
- 1/4
- 1/2
- 2
- 1/8
Show the answer
Answer: B. 1/2
Lengths change by k, so perimeter becomes half.
Lesson 3: Area of regular polygons and composite figures
TEKS G.11A G.11B
What you will learn
I can find the area of regular polygons and of composite figures made of triangles, parallelograms, trapezoids, kites and regular polygons.
The area of a regular polygon is ½ · apothem · perimeter. A composite figure is split into simple shapes whose areas are added or subtracted.
Key vocabulary
- apothem
- The perpendicular distance from the center of a regular polygon to one of its sides.
Examples: The apothem of a regular hexagon with side 10 is 5√3; The inner radius - regular polygon
- A polygon with all sides congruent and all angles congruent.
Examples: Equilateral triangle, square, regular hexagon; A regular octagon - composite figure
- A figure made by combining two or more simple shapes.
Examples: A rectangle with a triangle on top; A parallelogram with a triangle cut out
Worked example
Find the area of a regular hexagon with side 10 and apothem 5√3 ≈ 8.66.
- A regular hexagon has 6 equal sides, so the perimeter is 6 · 10 = 60.
The formula needs the perimeter, so compute it first. - Use A = ½ · a · p: A = ½ · 8.66 · 60.
The area of a regular polygon is half the apothem times the perimeter because it splits into triangles with height equal to the apothem. - A ≈ 259.8 square units (exactly 150√3).
Area is in square units, and the exact form keeps the √3 from the apothem.
Strategy: Split, compute, combine
- Split the figure into shapes you know.
- Find each area with its formula.
- Add the pieces, or subtract holes.
Check your understanding
A regular pentagon has perimeter 40 and apothem 5.5. Its area is…
- 40
- 55
- 220
- 110
Show the answer
Answer: D. 110
½ · 5.5 · 40 = 110.
A trapezoid has bases 10 and 6 and height 4. Its area is…
- 24
- 64
- 32
- 16
Show the answer
Answer: C. 32
½ · 16 · 4 = 32.
A kite has diagonals 12 and 8. Its area is…
- 96
- 48
- 40
- 20
Show the answer
Answer: B. 48
½ · 12 · 8 = 48.
Lesson 4: Surface area
TEKS G.11C
What you will learn
I can find the lateral and total surface area of prisms, pyramids, cones, cylinders, spheres and composite figures.
Lateral surface area is the area of the sides only; total surface area adds the bases. Use a net to see every face. Cylinder: 2πr² + 2πrh. Cone: πr² + πrℓ. Sphere: 4πr².
Key vocabulary
- lateral surface area
- The area of the side faces of a solid, not including the bases.
Examples: The label on a can; The rectangular sides of a prism - slant height
- The distance along the sloping face of a cone or pyramid from the base edge to the apex; it is not the same as the vertical height.
Examples: ℓ = 13 for a cone with r = 5 and h = 12; The height of a triangular face of a pyramid - net
- A flat pattern that folds into a solid; every face appears once.
Examples: A cross of six squares for a cube; A rectangle and two circles for a cylinder
Worked example
Find the total surface area of a rectangular prism that is 3 by 4 by 5.
- List the face pairs: 3·4 = 12 (two), 3·5 = 15 (two), 4·5 = 20 (two).
A rectangular prism has three kinds of faces and each appears twice. - Add one of each: 12 + 15 + 20 = 47.
Counting one of each pair first avoids missing a face. - Double: 2 · 47 = 94 square units.
Doubling accounts for the opposite faces, so no face is left out.
Strategy: Net and add
- Sketch a net and list the faces.
- Find each face’s area, using slant height for cones and pyramids.
- Add for total area, or add only the sides for lateral area.
Check your understanding
The total surface area of a cube with edge 4 is…
- 24
- 48
- 64
- 96
Show the answer
Answer: D. 96
6 · 4² = 96.
A cylinder has radius 2 and height 5. Its lateral area is…
- 28π
- 10π
- 20π
- 8π
Show the answer
Answer: C. 20π
2π(2)(5) = 20π.
A sphere has radius 6. Its surface area is…
- 36π
- 144π
- 288π
- 72π
Show the answer
Answer: B. 144π
4π(6)² = 144π.
Lesson 5: Volume
TEKS G.11D
What you will learn
I can find the volume of prisms, pyramids, cylinders, cones, spheres and composite figures.
Prisms and cylinders: V = Bh (base area times height). Pyramids and cones: V = ⅓Bh. Sphere: V = 4/3πr³. Volume is measured in cubic units.
Key vocabulary
- volume
- The amount of space inside a three-dimensional figure, measured in cubic units.
Examples: The space inside a box; 27 cubic feet - pyramid and cone volume
- One third of the volume of the prism or cylinder with the same base and height: V = ⅓Bh.
Examples: Cone with r = 6, h = 8: 96π; Pyramid with base 36 and height 9: 108 - hemisphere
- Half of a sphere; its volume is ½ · 4/3πr³ = 2/3πr³.
Examples: A dome; The top of a silo
Worked example
Find the volume of a cylinder with radius 4 and height 9.
- The base is a circle: B = π(4)² = 16π.
A cylinder is a prism with a circular base, so the base area comes first. - V = Bh = 16π · 9.
Multiplying the base area by the height stacks the base through the whole height. - V = 144π ≈ 452.4 cubic units.
Volume is cubic, and 144π keeps the exact value.
Strategy: Base times height
- Find the base area B.
- Multiply by the height (then by ⅓ for a pyramid or cone).
- Add pieces for composite solids.
Check your understanding
A rectangular prism is 5 by 4 by 3. Its volume is…
- 94
- 12
- 47
- 60
Show the answer
Answer: D. 60
5 · 4 · 3 = 60.
A cone and a cylinder have the same base and height. The cone’s volume is…
- Equal to the cylinder’s
- Half of the cylinder’s
- One third of the cylinder’s
- Twice the cylinder’s
Show the answer
Answer: C. One third of the cylinder’s
The cone is one third of the cylinder.
A sphere has radius 3. Its volume is…
- 36π
- 27π
- 108π
- 12π
Show the answer
Answer: A. 36π
4/3 · π · 27 = 36π.