Geometry Unit 6: Circles
This Geometry unit, Circles, has 4 lessons that cover TEKS G.12A, G.12B, G.12C, G.12D, G.12E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- G.12A apply theorems about circles, including relationships among angles, radii, chords, tangents and secants, to solve non-contextual problems
- G.12B apply the proportional relationship between the measure of an arc length of a circle and the circumference of the circle to solve problems
- G.12C apply the proportional relationship between the measure of the area of a sector of a circle and the area of the circle to solve problems
- G.12D describe radian measure of an angle as the ratio of the length of an arc intercepted by a central angle to the radius of the circle
- G.12E show that the equation of a circle with center at the origin and radius r is x² + y² = r² and determine the equation for the graph of a circle with radius r and center (h, k)
Lesson 1: Circle theorems
TEKS G.12A
What you will learn
I can apply theorems about angles, radii, chords, tangents and secants of circles.
A central angle equals its intercepted arc. An inscribed angle is half its intercepted arc. A tangent is perpendicular to the radius at the point of tangency, and two tangent segments from one point are congruent. When two chords meet inside a circle, the products of their segments are equal.
Key vocabulary
- inscribed angle
- An angle whose vertex is on the circle and whose sides are chords; its measure is half the intercepted arc.
Examples: An inscribed angle on a 100° arc measures 50°; An angle in a semicircle is 90° - tangent
- A line that touches a circle at exactly one point and is perpendicular to the radius at that point.
Examples: A bike wheel on the road; A line touching a circle at A with OA ⊥ the line - chord
- A segment whose endpoints are on the circle; a diameter is the longest chord.
Examples: A segment from one point of the circle to another; A diameter
Worked example
An inscribed angle intercepts an arc of 100°. Find its measure. Then find the inscribed angle that intercepts a 140° arc.
- An inscribed angle is half its intercepted arc: 100° ÷ 2 = 50°.
The vertex is on the circle, so it “sees” the arc from the edge and gets half the central angle. - For a 140° arc: 140° ÷ 2 = 70°.
Applying the same rule to a different arc shows the pattern. - A central angle on the same 140° arc would measure 140°, twice the inscribed angle.
A central angle equals its arc, so comparing the two confirms the half relationship.
Strategy: Name the angle or segment, use its theorem
- Identify central, inscribed, tangent or chord.
- Choose: half the arc, equal tangents, perpendicular to radius, or product of segments.
- Write and solve the equation.
Check your understanding
A central angle measures 84°. The intercepted arc measures…
- 96°
- 168°
- 42°
- 84°
Show the answer
Answer: D. 84°
A central angle equals its intercepted arc.
An inscribed angle intercepts a 76° arc. The angle measures…
- 14°
- 152°
- 76°
- 38°
Show the answer
Answer: D. 38°
Inscribed angles are half the intercepted arc.
An angle inscribed in a semicircle measures…
- 180°
- 45°
- 90°
- 60°
Show the answer
Answer: C. 90°
A semicircle’s arc is 180°, so the inscribed angle is 90°.
Lesson 2: Arc length and sector area
TEKS G.12B G.12C
What you will learn
I can use the proportional relationships for arc length and sector area.
An arc is a fraction of the circumference and a sector is the same fraction of the area. The fraction is θ/360°. Arc length = θ/360 · 2πr. Sector area = θ/360 · πr².
Key vocabulary
- arc length
- The length of a part of a circle’s circumference, equal to θ/360 times the circumference.
Examples: A 90° arc of a circle with circumference 20 is 5; A 60° arc of a circle with r = 15 is 5π - sector
- The region bounded by two radii and the arc between them, like a slice of pie.
Examples: A pizza slice; The shaded part of a spinner - central angle fraction
- The ratio θ/360° that tells what part of the full circle the arc and sector are.
Examples: 90° is 1/4; 45° is 1/8
Worked example
A circle has radius 9. A central angle is 80°. Find the arc length and the sector area.
- The fraction of the circle is 80/360 = 2/9.
A central angle of 80° out of a full turn of 360° is the portion of the circle. - Arc length: 2/9 · 2π(9) = 2/9 · 18π = 4π ≈ 12.6.
The circumference is 2πr = 18π, and the arc is that fraction of it. - Sector area: 2/9 · π(9)² = 2/9 · 81π = 18π ≈ 56.5.
The sector is the same fraction of the whole area πr², which is in square units.
Strategy: Fraction of the circle
- Write θ/360.
- Multiply by the full circumference for arc length, or by the full area for sector area.
- To find θ, set the part equal to the fraction of the whole.
Check your understanding
A 90° arc on a circle of radius 8 has length…
- 16π
- 8π
- 2π
- 4π
Show the answer
Answer: D. 4π
1/4 · 16π = 4π.
A 60° sector of a circle with radius 6 has area…
- 36π
- 12π
- 3π
- 6π
Show the answer
Answer: D. 6π
1/6 · 36π = 6π.
An arc is 1/5 of a circle. The central angle is…
- 36°
- 72°
- 90°
- 60°
Show the answer
Answer: B. 72°
360° ÷ 5 = 72°.
Lesson 3: Radian measure
TEKS G.12D
What you will learn
I can describe radian measure as the ratio of the arc length to the radius.
One radian is the angle whose intercepted arc has the same length as the radius. In general θ (radians) = s ÷ r. A full turn is 2π radians and 180° = π radians.
Key vocabulary
- radian
- The measure of a central angle whose arc length equals the radius; θ = s/r.
Examples: An arc of 6 on a circle with r = 3 gives 2 radians; 180° = π radians - conversion factor
- To change degrees to radians multiply by π/180; to change radians to degrees multiply by 180/π.
Examples: 60° = π/3; 3π/4 = 135° - arc length formula
- With θ in radians, the arc length is s = rθ.
Examples: r = 5, θ = 1.2 gives s = 6; r = 4, θ = π/2 gives s = 2π
Worked example
An arc of length 6 is on a circle of radius 3. Find the central angle in radians.
- Use θ = s/r.
Radian measure is defined as arc length divided by radius. - θ = 6/3 = 2.
The units cancel (length ÷ length), so radians have no units. - The angle is 2 radians, a little more than one radian (an arc as long as the radius).
About 57.3° is one radian, so 2 radians is about 114.6°.
Strategy: Arc over radius
- Write θ = s/r.
- Substitute any two known values and solve for the third.
- Convert with 180° = π when degrees are needed.
Check your understanding
An arc of length 10 on a circle of radius 5 gives a central angle of…
- 1/2 radian
- 50 radians
- 5 radians
- 2 radians
Show the answer
Answer: D. 2 radians
10 ÷ 5 = 2 radians.
90° equals…
- 2π radians
- π radians
- π/2 radians
- π/4 radians
Show the answer
Answer: C. π/2 radians
90° is half of 180° = π, so π/2.
2π radians equals…
- 180°
- 360°
- 720°
- 90°
Show the answer
Answer: B. 360°
A full turn is 360°.
Lesson 4: Equations of circles
TEKS G.12E
What you will learn
I can write and graph the equation of a circle centered at the origin or at (h, k).
A circle is every point at a fixed distance r from the center. At the origin: x² + y² = r². At (h, k): (x − h)² + (y − k)² = r². The equation comes from the distance formula.
Key vocabulary
- standard form of a circle
- The equation (x − h)² + (y − k)² = r² with center (h, k) and radius r.
Examples: (x − 3)² + (y + 2)² = 25; x² + y² = 49 - center
- The fixed point from which every point on the circle is the same distance.
Examples: (3, −2) in (x − 3)² + (y + 2)² = 25; (0, 0) in x² + y² = 49 - radius
- The distance from the center to any point on the circle; in the equation it is the square root of the right side.
Examples: r = 5 when the right side is 25; r = 7 when the right side is 49
Worked example
Write the equation of a circle with center at the origin and radius 7.
- For a center at the origin use x² + y² = r².
The distance from (0, 0) to (x, y) is √(x² + y²), and setting it equal to r gives the equation. - Substitute r = 7: x² + y² = 7².
The radius is squared, which is why the right side is r² and not r. - x² + y² = 49.
Check: the point (7, 0) gives 49 + 0 = 49, so it lies on the circle.
Strategy: Center, radius, equation
- Find the center (h, k) and the radius r.
- Substitute into (x − h)² + (y − k)² = r².
- Check a point on the circle.
Check your understanding
What is the equation of a circle with center (0, 0) and radius 4?
- x² − y² = 16
- x + y = 16
- x² + y² = 4
- x² + y² = 16
Show the answer
Answer: D. x² + y² = 16
The right side is r² = 16.
The circle (x − 2)² + (y + 5)² = 9 has center…
- (2, 5)
- (−2, 5)
- (2, −5)
- (9, 0)
Show the answer
Answer: C. (2, −5)
The center is (2, −5).
The radius of (x − 1)² + y² = 49 is…
- 49
- 7
- √7
- 1
Show the answer
Answer: B. 7
r = √49 = 7.