Physics Unit 4: Electricity and Magnetism
This Physics unit, Electricity and Magnetism, has 5 lessons that cover TEKS P.6A, P.6B, P.6C, P.6D, P.6E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- P.6A Predict how electric force depends on charge and distance using Coulomb’s law
- P.6B Identify and describe electric and magnetic forces and fields in everyday devices
- P.6C Investigate conservation of charge during induction, conduction and polarization
- P.6D Analyze, design and build series and parallel circuits from schematics
- P.6E Calculate current, potential difference, resistance and power in series and parallel circuits using Ohm’s law
Lesson 1: Coulomb’s law
TEKS P.6A
What you will learn
I can predict how the electric force depends on charge and distance using Coulomb’s law.
I can use F = kq₁q₂/r² and decide if the force attracts or repels.
Key vocabulary
- Coulomb’s law
- The electric force between two point charges is proportional to the product of the charges and inversely proportional to the square of the distance: F = kq₁q₂/r².
Examples: Two 2 μC charges 0.3 m apart; Attraction between an electron and a proton - coulomb (C)
- The SI unit of electric charge. One electron has a charge of −1.6 × 10⁻¹⁹ C.
Examples: A 2 μC charge is 2 × 10⁻⁶ C; Charge of a proton - like and unlike charges
- Like charges (both + or both −) repel one another; unlike charges (+ and −) attract.
Examples: Two electrons repel; A proton and electron attract
Worked example
Two charges of +2.0 μC and +3.0 μC are 0.30 m apart. Find the force and say whether it attracts or repels. (k = 9.0 × 10⁹ N·m²/C²)
- Convert to coulombs: 2.0 μC = 2.0 × 10⁻⁶ C and 3.0 μC = 3.0 × 10⁻⁶ C.
The formula needs coulombs, so micro-prefixes must be converted. - F = kq₁q₂/r² = (9.0 × 10⁹)(2.0 × 10⁻⁶)(3.0 × 10⁻⁶) ÷ (0.30)².
The charges multiply and the distance is squared and keeping the exponents in order prevents arithmetic slips. - F = 0.054 ÷ 0.090 = 0.60 N.
The units N·m²/C² × C² ÷ m² leave newtons so the answer is a little over half a newton of repulsion. - Both charges are positive, so the force is repulsive.
Like charges push each other apart, so the sign of the charges tells the direction.
Strategy: Charges multiply, distance squares, signs tell the direction
- Convert to coulombs.
- Use F = kq₁q₂/r².
- Compare signs.
- Use ratios for changes.
Check your understanding
Like charges…
- Cancel
- Do nothing
- Attract
- Repel
Show the answer
Answer: D. Repel
They repel.
If distance triples, force becomes…
- 9
- 3
- 1/3
- 1/9
Show the answer
Answer: D. 1/9
One ninth.
The SI unit of charge is the…
- Ampere
- Newton
- Coulomb
- Volt
Show the answer
Answer: C. Coulomb
The coulomb.
Lesson 2: Electric and magnetic fields in devices
TEKS P.6B
What you will learn
I can identify and describe electric and magnetic forces and fields in everyday devices.
I can show how moving charges make magnetic fields and how changing fields make current.
Key vocabulary
- electric field
- A region around a charge where another charge feels a force; it points the way a positive test charge would move.
Examples: Field between charged plates; Field of a lightning cloud - magnetic field
- A region around a magnet or a moving charge where magnetic forces act; field lines go from north to south outside a magnet.
Examples: Around a bar magnet; Around a wire carrying current - electromagnetic induction
- The production of an electric current in a conductor by a changing magnetic field.
Examples: A generator; A wireless charger
Worked example
A wire carries current. Show that a compass needle near it deflects, and explain what this means.
- Oersted found that a compass near a current-carrying wire turns.
A compass responds only to magnetic fields, so the current must make one. - Moving charges produce a magnetic field that circles the wire.
This links electricity and magnetism as two faces of one phenomenon. - Reversing the current reverses the direction of the deflection.
The field direction depends on the direction of the current. - Coiling the wire into a solenoid strengthens the field, which is how an electromagnet works.
A coil adds up the fields of every loop, and an iron core strengthens it more.
Strategy: Moving charge makes a field, changing field makes current
- Is there a current or moving charge?
- Find the magnetic field.
- Look for changing field.
- Name the energy conversion.
Check your understanding
Moving charges produce…
- Nothing
- Only heat
- Gravity
- A magnetic field
Show the answer
Answer: D. A magnetic field
Current makes a magnetic field.
A generator turns…
- Light into sound
- Heat into mass
- Electricity into motion
- Motion into electricity
Show the answer
Answer: D. Motion into electricity
It induces current.
A motor turns…
- Motion into electricity
- Electricity into motion
- Mass into energy
- Sound into light
Show the answer
Answer: B. Electricity into motion
It uses magnetic force on current.
Lesson 3: Conservation of charge
TEKS P.6C
What you will learn
I can investigate conservation of charge during charging by induction, conduction and polarization.
I can predict the charge left on each object after charging.
Key vocabulary
- conservation of charge
- The total electric charge of an isolated system stays the same; charge is transferred, not created or destroyed.
Examples: Rubbing a balloon on hair; Two spheres sharing charge - conduction
- Charging by direct contact, in which electrons move from one object to another.
Examples: A charged rod touching a sphere; Static shock from a doorknob - induction
- Charging without touching: a nearby charged object redistributes electrons and a ground connection lets some leave or enter.
Examples: A negative rod near a grounded sphere leaves it positive; Charging with a ground wire
Worked example
Two identical metal spheres have charges +6.0 μC and −2.0 μC. They touch and are separated. What is the charge on each?
- The total charge is +6.0 + (−2.0) = +4.0 μC.
Charge is conserved, so the total must stay at +4.0 μC after contact. - The spheres are identical conductors, so charge spreads equally between them.
Free electrons move until the repulsion is the same on each sphere. - Each sphere ends with +4.0 ÷ 2 = +2.0 μC.
Dividing the total equally gives the charge on each. - Check: +2.0 + 2.0 = +4.0 μC.
The total is the same as before the contact, which confirms that charge is conserved.
Strategy: Total stays the same, electrons move
- Add up the total charge.
- Decide if charges can move.
- Share equally on identical conductors.
- Check the total.
Check your understanding
Conservation of charge means…
- Charge doubles
- Charge is destroyed
- Charge is created
- Total charge stays the same
Show the answer
Answer: D. Total charge stays the same
Total charge is constant.
Identical spheres with +4 μC and 0 touch. Each ends with…
- 0
- +4 μC
- +2 μC
- +8 μC
Show the answer
Answer: C. +2 μC
+2 μC each.
Charging by induction leaves the object with…
- The same sign
- The opposite sign to the rod
- Double charge
- No charge
Show the answer
Answer: B. The opposite sign to the rod
It is opposite.
Lesson 4: Series and parallel circuits
TEKS P.6D
What you will learn
I can analyze, design and build series and parallel circuits from schematics.
I can read a schematic and tell how current and voltage behave in series and in parallel.
Key vocabulary
- series circuit
- A circuit with a single path for current, so the same current flows through every component.
Examples: Old string lights; A switch and bulb - parallel circuit
- A circuit with more than one path, so each branch has the same voltage and the currents add.
Examples: Household outlets; Car headlights - schematic
- A diagram that uses standard symbols to show how the parts of a circuit are connected.
Examples: A battery, resistor and switch drawn with symbols; A wiring plan
Worked example
Three bulbs are in series with a battery. One bulb burns out. What happens to the others, and why?
- In a series circuit there is only one path.
The same current must flow through each component in turn. - When one bulb burns out, the filament breaks, and the path is open.
An open circuit stops the current everywhere in the loop. - All three bulbs go out.
Without a complete path, no current flows in any part of the circuit. - This is why one burned bulb could turn off a whole string of old holiday lights.
Parallel wiring avoids this, because each branch has its own path.
Strategy: Count the paths
- One path: series.
- More paths: parallel.
- Series: same current.
- Parallel: same voltage.
Check your understanding
In a series circuit, current is…
- Doubled
- Different in each part
- Zero
- The same everywhere
Show the answer
Answer: D. The same everywhere
The same current flows.
In a parallel circuit, voltage across each branch is…
- Zero
- Different
- The same
- Divided
Show the answer
Answer: C. The same
Each branch has the full voltage.
If one bulb fails in a series circuit…
- Only that one goes out
- All bulbs go out
- Nothing happens
- The others get brighter
Show the answer
Answer: B. All bulbs go out
The loop is broken.
Lesson 5: Ohm’s law and electric power
TEKS P.6E
What you will learn
I can calculate current, potential difference, resistance and power in series and parallel circuits using Ohm’s law.
I can use V = IR and P = IV and find equivalent resistance.
Key vocabulary
- Ohm’s law
- The potential difference across a resistor equals the current times the resistance: V = IR.
Examples: 12 V across 4 Ω gives 3 A; Resistance of a bulb - electric power
- The rate at which electrical energy is transferred, P = IV = I²R, in watts.
Examples: A 60 W bulb; A 1500 W heater - equivalent resistance
- The single resistance that could replace a combination of resistors and give the same total current.
Examples: 2 + 4 + 6 = 12 Ω in series; 6 and 3 in parallel give 2 Ω
Worked example
Three resistors of 2.0 Ω, 4.0 Ω and 6.0 Ω are in series with a 12 V battery. Find the current and the voltage across each.
- In series, resistances add: R = 2.0 + 4.0 + 6.0 = 12 Ω.
The current has to pass through all three, so the resistances act together. - I = V/R = 12 ÷ 12 = 1.0 A.
Ohm’s law gives the current for the whole circuit, and it is the same through every resistor. - V₁ = (1.0)(2.0) = 2.0 V; V₂ = 4.0 V; V₃ = 6.0 V.
Each resistor uses a share of the voltage proportional to its resistance. - Check: 2.0 + 4.0 + 6.0 = 12 V.
The voltage drops must add up to the battery voltage, which is conservation of energy.
Strategy: Find R, then I, then each V
- Find equivalent resistance.
- Use I = V/R.
- Find each voltage or branch current.
- Check the sums.
Check your understanding
Ohm’s law is…
- V = I + R
- V = R/I
- V = I/R
- V = IR
Show the answer
Answer: D. V = IR
V = IR.
Series resistors of 3 Ω and 5 Ω give…
- 15 Ω
- 2 Ω
- 8 Ω
- 1.9 Ω
Show the answer
Answer: C. 8 Ω
They add in series.
A 12 V battery across 4 Ω gives a current of…
- 3 A
- 8 A
- 0.33 A
- 48 A
Show the answer
Answer: A. 3 A
3 A.