Physics Unit 5: Energy and Momentum
This Physics unit, Energy and Momentum, has 5 lessons that cover TEKS P.7A, P.7B, P.7C, P.7D, P.7E. Each lesson below gives the goal, key vocabulary, a worked example and practice questions with answers you can check.
Practice this unit with interactive questions
TEKS covered in this unit
- P.7A Calculate work and power in one dimension and identify when work is or is not done
- P.7B Investigate and calculate mechanical, kinetic and potential energy
- P.7C Apply conservation of energy using the work-energy theorem, energy diagrams and transformation equations
- P.7D Calculate impulse and momentum in systems such as vehicle safety features, athletics and rockets
- P.7E Qualitatively analyze momentum conservation in one-dimensional elastic and inelastic collisions
Lesson 1: Work and power
TEKS P.7A
What you will learn
I can calculate work and power in one dimension and identify when work is or is not done.
I can use W = Fd (force along the motion) and P = W/t.
Key vocabulary
- work
- The energy transferred when a force moves an object through a distance in the direction of the force: W = Fd.
Examples: Lifting a box; Pushing a car - joule (J)
- The SI unit of work and energy: 1 J = 1 N·m.
Examples: Lifting a 1 N apple 1 m; 196 J to lift 10 kg 2 m - power
- The rate at which work is done or energy is transferred: P = W/t, measured in watts (J/s).
Examples: A 60 W bulb; A runner climbing stairs quickly
Worked example
A person lifts a 10 kg box 2.0 m at constant speed in 4.0 s. Find the work and the power. (g = 9.8 m/s²)
- The force needed equals the weight: F = mg = 10 × 9.8 = 98 N.
At constant speed, the net force is zero, so the lifting force just balances gravity. - W = Fd = 98 × 2.0 = 196 J.
The force and the displacement are in the same direction, so work is just the product. - P = W/t = 196 ÷ 4.0 = 49 W.
Power measures how fast the work is done, so it depends on the time. - Lifting the box in 2.0 s would take the same work but 98 W of power.
Power depends on how fast, not only on how much, which is why a faster climb is harder.
Strategy: Force along the motion times distance
- Find the force along the motion.
- Multiply by distance.
- Divide by time for power.
- Check the units.
Check your understanding
Work equals…
- Force × time
- Mass × speed
- Force ÷ distance
- Force × distance along the force
Show the answer
Answer: D. Force × distance along the force
W = Fd.
Holding a heavy box still does…
- Infinite work
- Negative work
- A lot of work
- No work on the box
Show the answer
Answer: D. No work on the box
No displacement, no work.
Power is…
- Force ÷ mass
- Work × time
- Work ÷ time
- Energy × distance
Show the answer
Answer: C. Work ÷ time
P = W/t.
Lesson 2: Kinetic and potential energy
TEKS P.7B
What you will learn
I can investigate and calculate mechanical, kinetic and potential energy.
I can use KE = ½mv² and PE = mgh and compare changes.
Key vocabulary
- kinetic energy
- The energy of an object because of its motion: KE = ½mv².
Examples: A moving car; A thrown ball - gravitational potential energy
- The energy stored in an object because of its height above a reference level: PE = mgh.
Examples: A book on a shelf; Water behind a dam - mechanical energy
- The sum of an object’s kinetic and potential energy.
Examples: A pendulum at any point; A roller coaster
Worked example
A 1000 kg car moves at 20 m/s. Find its kinetic energy. What happens at 40 m/s?
- KE = ½mv² = ½(1000)(20)² = 200,000 J.
Kinetic energy depends on the mass and the square of the speed. - At 40 m/s: KE = ½(1000)(40)² = 800,000 J.
Doubling the speed multiplies the kinetic energy by 2² = 4. - Four times the energy has to be removed by the brakes to stop.
This is why stopping distance grows with the square of the speed. - A highway crash at 40 m/s is far more severe than at 20 m/s.
The extra energy turns into deforming the car, so speed matters much more than mass for severity.
Strategy: Speed squared for KE, height for PE
- Pick KE or PE.
- Use SI units.
- Square the speed.
- Compare ratios.
Check your understanding
If speed triples, KE becomes…
- 27 times
- 6 times
- 3 times
- 9 times
Show the answer
Answer: D. 9 times
Nine times as much.
PE = mgh. 3 kg at 2 m height gives…
- 5 J
- 19.6 J
- 6 J
- 58.8 J
Show the answer
Answer: D. 58.8 J
58.8 J.
Kinetic energy depends on…
- Height only
- Mass and speed
- Volume
- Color
Show the answer
Answer: B. Mass and speed
Mass and speed.
Lesson 3: Conservation of energy
TEKS P.7C
What you will learn
I can apply conservation of energy using the work-energy theorem, energy diagrams and transformation equations.
I can set energy before = energy after and use W = ΔKE when friction acts.
Key vocabulary
- conservation of energy
- In a closed system, the total energy stays constant; it only changes form.
Examples: Pendulum swinging; A falling ball gaining KE - work-energy theorem
- The net work done on an object equals its change in kinetic energy: W_net = ΔKE.
Examples: Brakes slowing a car; A push speeding up a cart - energy dissipation
- The conversion of mechanical energy into thermal energy, usually by friction, which spreads out and is no longer useful.
Examples: Brakes heating up; A ball’s bounces getting lower
Worked example
A 2.0 kg ball is dropped from 20 m. Ignoring air resistance, find its speed just before it hits the ground. (g = 9.8 m/s²)
- Energy at the top: PE = mgh = 2.0 × 9.8 × 20 = 392 J, and KE = 0.
The ball starts at rest, so all of its energy is potential. - Energy at the bottom: PE = 0, KE = ½mv².
At the ground level, all of the potential energy has changed into kinetic energy. - Set them equal: 392 = ½(2.0)v², so v² = 392 and v = 19.8 m/s.
Conservation of energy skips the need to know the time. - The mass cancels: v = √(2gh) for any mass.
This confirms that heavy and light objects reach the same speed when they fall the same height without air resistance.
Strategy: Total before = total after (+ friction loss)
- List KE and PE at start.
- List KE and PE at end.
- Add work by friction if any.
- Solve for the unknown.
Check your understanding
Conservation of energy says total energy…
- Vanishes
- Decreases
- Increases
- Stays constant in a closed system
Show the answer
Answer: D. Stays constant in a closed system
It is conserved.
A ball dropped from 20 m has speed at the bottom (g = 9.8) of about…
- 100 m/s
- 5 m/s
- 20 m/s
- 2 m/s
Show the answer
Answer: C. 20 m/s
About 19.8 m/s.
Friction turns kinetic energy into…
- Mass
- Thermal energy
- Light only
- Gravity
Show the answer
Answer: B. Thermal energy
Heat.
Lesson 4: Impulse and momentum
TEKS P.7D
What you will learn
I can calculate impulse and momentum in systems such as vehicle safety features, athletics and rockets.
I can use p = mv and FΔt = Δp to explain why a longer stopping time means a smaller force.
Key vocabulary
- momentum
- The product of an object’s mass and velocity: p = mv. It is a vector.
Examples: A 1000 kg car at 20 m/s has 20,000 kg·m/s; A thrown ball - impulse
- The product of the force and the time over which it acts, equal to the change in momentum: FΔt = Δp.
Examples: A bat hitting a ball; An airbag slowing a person - crumple zone
- A part of a car designed to collapse in a crash, lengthening the stopping time so the force on passengers is lower.
Examples: The front of a car; A bike helmet’s foam
Worked example
A 70 kg passenger traveling at 15 m/s stops (a) in 0.10 s against a dashboard and (b) in 0.50 s with a seat belt and airbag. Find the average force in each.
- Change in momentum: Δp = mΔv = 70 × 15 = 1050 kg·m/s.
The momentum that must be removed is the same in both cases. - (a) F = Δp ÷ Δt = 1050 ÷ 0.10 = 10,500 N.
A short stopping time needs a very large force and a force that large would cause serious injury. - (b) F = 1050 ÷ 0.50 = 2100 N.
Increasing the time by 5 times reduces the force by 5 times. - Airbags, crumple zones and seat belts save lives by lengthening the stopping time.
The same impulse is spread over a longer time, so the peak force that causes injury is smaller.
Strategy: Momentum change is impulse; spread it out to lower the force
- Find the change in momentum.
- Divide by the time.
- Mind the signs.
- Compare the times.
Check your understanding
Momentum is…
- mass ÷ velocity
- force × distance
- mass × acceleration
- mass × velocity
Show the answer
Answer: D. mass × velocity
p = mv.
Impulse equals…
- Change in mass
- Change in energy
- Change in momentum
- Distance
Show the answer
Answer: C. Change in momentum
FΔt = Δp.
An airbag reduces force by…
- Decreasing mass
- Increasing the stopping time
- Reducing speed only
- Adding momentum
Show the answer
Answer: B. Increasing the stopping time
It lengthens the time.
Lesson 5: Collisions
TEKS P.7E
What you will learn
I can qualitatively analyze the conservation of momentum in one-dimensional elastic and inelastic collisions.
I can tell elastic from inelastic collisions and use total momentum before = after.
Key vocabulary
- conservation of momentum
- In an isolated system, the total momentum before a collision equals the total momentum after.
Examples: Two carts colliding; A cannon recoiling - elastic collision
- A collision in which both momentum and kinetic energy are conserved, and the objects bounce apart.
Examples: Billiard balls; Steel balls on a cradle - inelastic collision
- A collision in which momentum is conserved but some kinetic energy becomes thermal or deformation energy.
Examples: A car crash; Clay hitting a wall
Worked example
A 2.0 kg cart moving at 3.0 m/s hits and sticks to a 1.0 kg cart at rest. Find the final velocity and the fraction of kinetic energy lost.
- Momentum before: (2.0)(3.0) + (1.0)(0) = 6.0 kg·m/s.
Add up the momentum of every object, including the one at rest, which has zero. - After they stick: (2.0 + 1.0)v = 6.0, so v = 2.0 m/s.
The two carts move together with the same velocity because they stick. - KE before = ½(2.0)(3.0)² = 9.0 J; after = ½(3.0)(2.0)² = 6.0 J.
Comparing the kinetic energy shows how much was lost. - Lost 3.0 J, or one third. This is an inelastic collision.
Momentum is conserved, but the kinetic energy became heat and deformation, so it is not conserved.
Strategy: Add the momentum before and after
- Choose a positive direction.
- Add momentum before.
- Set equal to momentum after.
- Check KE to classify.
Check your understanding
In all collisions of an isolated system, what is conserved?
- Velocity of each object
- Speed
- Kinetic energy
- Momentum
Show the answer
Answer: D. Momentum
Total momentum.
Objects that stick together have a…
- No collision
- Elastic collision
- Perfectly inelastic collision
- Explosion
Show the answer
Answer: C. Perfectly inelastic collision
Sticking is perfectly inelastic.
In an elastic collision, kinetic energy is…
- Conserved
- Zero
- Gained
- Lost
Show the answer
Answer: A. Conserved
It is conserved.